LemonC's blog View Details
Archive for April, 2019
Posted by LemonC | Apr 23, 2019 @ 03:22 PM | 1,206 Views
Betaflight 4.0 'Freestyle' stock settings (5 min 50 sec)


flippy spins on betaflight 4.0's stock freestyle settings. bouncy
Posted by LemonC | Apr 19, 2019 @ 04:58 PM | 1,886 Views
I had the day off and planned on flying a lot... My Session decided it was a good day to lock up on me so i decided to use that best buy warranty i had going on...

Cost me more than i expected but i walked out with a Hero 7 Black special white edition.

My tune was no good after the new Hero mounts were printed up, gave it a few goes, and i decided instead of starting over on betaflight 3.3 or something really old, i 'd just go ahead and update my firmware to 4.0.

First flights were no good, but i knew there was a different tuning method i needed to review first. watched some videos and ive pasted the freestyle cli changes recomended on the betaflight 4.0 wiki .

I also reduced the stock idle up percentage bc 5.5 seems way too much. giving it a go after work!
Posted by LemonC | Apr 01, 2019 @ 12:08 PM | 4,133 Views
Cyclops 100mm FPV Frame with 1102 motors (3 min 31 sec)
Its actually the 130mm cyclops..

I got a problem fpv micro flying this weekend! So small and lite, it's safe enough to fly near my house. 1102 dys motors, 6a racerstar escs, 20x20 f3 board, tiny vtx and cam.

very underpower, but it flies.

using zippy 35c 500mah 2s lipo which are 34.5 grams with wires. i might try some higher c rating lipos near this weight, 450mah or something. also might try dif props. 2" seem to work better than 3" so far. tried Hq 3035t and HQ 2035Q... Flies almost like my tinywhoop brushed but flies longer and faster.