punkindrublik's blog View Details
Posted by punkindrublik | Nov 30, 2015 @ 08:20 PM | 6,911 Views
We're at it again! I'll be adding more over the next few hours!

We have a Cyber Monday section full of deals and don't forget the bonus codes below!


Posted by punkindrublik | Nov 29, 2015 @ 01:10 PM | 7,280 Views
10% OFF SITEWIDE until Midnight Sunday!


Posted by punkindrublik | Nov 27, 2015 @ 06:01 PM | 5,842 Views
Deals galore and still adding more

Don't forget the codes below in addition to our Black Friday Category.


Posted by punkindrublik | Nov 25, 2015 @ 10:04 PM | 5,814 Views
Just use Code "drunkuncle" on your order of $50 or more from 12AM to Midnight (PST) on Thanksgiving Day!

Come take advantage of our Pre-Black Friday Sale!


Posted by punkindrublik | Sep 21, 2015 @ 04:57 PM | 7,060 Views
They're finally here! The new Zeus mini 20 amp ESC.

These are the now the ESC to beat. With amazing performance, a tiny package and a nod from Steffen, the BLHeli man himself.

These have proved to be everything the KISS is, but without failures and a lower pricepoint.

Fully programmable with our MRM Zeus Linker, these ESCs come with BLHeli 14, DLM enabled and of course, oneshot125 compatible.

Come n get em while they're hot!

Besides MRM, you'll be able to find them shortly at readymaderc.com and twistedquads.com.
Posted by punkindrublik | Aug 27, 2015 @ 07:04 PM | 7,410 Views
Ya, that's right

Get your FPV IS NOT A CRIME Bumper Sticker now at MRM!

Posted by punkindrublik | Aug 21, 2015 @ 12:43 PM | 8,251 Views
It's finally here! The MRM Dagger 180, a brand spankin new mini FPV frame from multirotormania!

Made from our usual high quality carbon, this tough little guy is perfect for close proximity FPV. MRM carries all the gear you'll need to get this little puppy built. Check it out now!

http://multirotormania.com/200mm-and...-quad-kit.html...Continue Reading
Posted by punkindrublik | Aug 04, 2015 @ 09:28 PM | 7,256 Views
The latest and greatest in micro ESCs!

BLHeli Firmware
Oneshot and Damped Light Mode Capable
USB programmable with optional USB Linker
2-4s capable
600Hz refresh rate


...Continue Reading
Posted by punkindrublik | Jul 11, 2015 @ 09:03 PM | 6,627 Views
Limited Edition Preorder!

We'll be selling at these at the Nationals at the MRM booth. I've also decided to let a FEW go beforehand online. Get it shipped or pick it up at the races.
Orders that include shipping will not go out until after the 15th.

All sizes available (M-XXXL) in Red, Black and White.


...Continue Reading
Posted by punkindrublik | Jul 04, 2015 @ 12:00 PM | 6,210 Views
10% off all frames for this holiday weekend. Get em while they're hot!

Use this code JULY4FRAME-10%


Happy 4th Everybody!...Continue Reading
Posted by punkindrublik | Jun 05, 2015 @ 07:21 PM | 7,308 Views
They just got here. This is MRMs new frame, the MACHETE. Built for speed and it delivers. An awesome, aerodynamic, lightweight frame that will blow your socks off!

Your choice of 20 or 35mm aluminum standoffs and clamps in red, green or blue.


2216 1100+kv motors and 4 or 5s and you'll be holding on to your goggles!

Introductory price of just $99! You can't beat that for a high perfomance, high quality 400+mm frame.

We only have about a dozen at the moment, but we'll have plenty of stock in less than two weeks. Get your Machete while the gettin is hot!
Posted by punkindrublik | May 30, 2015 @ 01:43 PM | 7,051 Views
MRM is proud to be sponsoring the 1st Annual National Drone Championships.

If you can make it, be sure to stop by the MRM booth to say hi. Should be a blast!


Posted by punkindrublik | May 19, 2015 @ 02:06 AM | 6,828 Views
You dig the Night Hawk? Well we've brought in 2 new larger versions in 310mm and 330mm. These aren't just longer arms, these are completely resized frames!



And don't forget the ever popular original!
Posted by punkindrublik | May 14, 2015 @ 09:47 PM | 13,090 Views
Time to update everybody on the best MultiRotor store on the planet! (yeah, I'm a little bias). Check out this read if you get a moment. Nothing fancy, just a note to tell everybody what's going on and to thank all of our wonderful customers that have stayed with us through our growth (which was admittedly sometimes painful).

Thanks everybody and fly on!



Posted by punkindrublik | May 04, 2015 @ 12:53 PM | 6,097 Views
We want to help feed the victims affected by the 2015 Nepal Earthquake. So to raise as much money as possible we are raffling off a complete 200mm quadcopter bundle!

Purchase your raffle tickets today and 100% of the proceeds will goto the ACF-USA ( https://my.actionagainsthunger.org/c...tion?eid=49215 ) to directly help the hungry in Nepal.


MRM will cover shipping expenses. If you purchase raffle tickets and nothing else, please choose "local pickup" as your shipping option.

We will choose a winner on June 1st. All customers are eligible no matter what their location.

Thanks for doing your part. We're trying to do ours!
Posted by punkindrublik | Feb 21, 2015 @ 08:15 AM | 10,005 Views
These things are soooo freakin small!!

This is a fully functioning MinimOSD in a 15x15mm package! Now everybody has room for an OSD!


Shipping as low as $2!
Posted by punkindrublik | Feb 15, 2015 @ 04:44 PM | 8,198 Views
That's right, we have a new version II. It's 9g lighter but still has all the powerful goodness of the original.

Get em while they're hot

Posted by punkindrublik | Feb 03, 2015 @ 03:09 PM | 8,366 Views
The free mini has been shipped to the winner. I'm not going to announce who they are, but here's a tracking number for you all to follow

Who's gonna get it??



And a big thanks to everybody who participated!
Posted by punkindrublik | Jan 21, 2015 @ 11:07 PM | 7,668 Views
We're gonna make somebody's month!


...Continue Reading
Posted by punkindrublik | Jan 06, 2015 @ 04:26 AM | 8,157 Views
Another addition to our MRM line of motors.

These are kick butt little buggers that are a definite upgrade to your DYS 1806s.
Oversize bearings, 3mm hollow shaft and factory balancing make this a genuine quality motor.
Come check em out HERE!!