ShonanBeachRC's blog View Details
Posted by ShonanBeachRC | Today @ 09:56 AM | 1,794 Views
I bought an Tamiya Neo Scorcher which is based on the TT-02B chassis! I'm looking forward to assemble this kit! I will make some pictures of assembling the Tamiya Neo Scorcher TT-02B!

More on my website: https://www.shonanbeachrc.com/rc-car...uild%ef%bc%81/
Posted by ShonanBeachRC | Jan 14, 2021 @ 09:53 AM | 5,676 Views
In this video I'm having some fun with my ZD-Racing Raptors MT-16. The ZD-Racing Raptors MT-16 is the little brother of the ZD-Racing Thunder ZMT-10. Its not the fastest car but I think its a fun, complete and good rc car. I'm sorry but sometimes its difficult to see in the video because of the sunlight!

If you like it buy it here!
https://www.banggood.com/custlink/vDKY8hBj56

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars

ZD-Racing Raptors MT-16 bashing (14 min 0 sec)

Posted by ShonanBeachRC | Jan 05, 2021 @ 01:34 AM | 2,783 Views
Finally finished painting my Tamiya Gravel Hound (DF-02) and a small upgrade!
I used PS-23 Gunmetal and PS-37 Translucent Red. Only thing left is the motor and ESC.

Please visit my website for more on this rebuild! https://www.shonanbeachrc.com/rc-reb...df-02-rebuild/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars
Posted by ShonanBeachRC | Dec 29, 2020 @ 10:12 AM | 7,172 Views
I took my HSP 94111 (Brontosaurus) to beach for some bashing, but unfortunately the ESC kept overheating again! The car is quite heavy therefor I think its to much for the ESC! I will try with an 120A ESC later on and hope I can make a better video!

I personally enjoyed assembling it, so if you like it, Buy it here!
HSP 94111 kit https://s.click.aliexpress.com/e/_9wyAmW
or if you want a RTR buy it HERE!
https://s.click.aliexpress.com/e/_A9fRIE

3650 Motor and ESC!
http://s.click.aliexpress.com/e/_dWKKgfF
https://www.banggood.com/custlink/333mTyNafQ

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars

HSP 94111 (Brontosaurus) Beach Bash 2S and 3SLipo! (5 min 31 sec)

Posted by ShonanBeachRC | Dec 13, 2020 @ 11:59 AM | 8,004 Views
Started working on a Tamiya TT-01D rebuild! Some parts were broken but will arrive soon!
I will be using a Tamiya Nissan R390 GT1 body!
It's a box full of parts but hopefully i can make something nice out of it!

For more info see my website: https://www.shonanbeachrc.com/

Youtube: https://www.youtube.com/channel/UChN...q0Mz5IYRdXY18w
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts
Posted by ShonanBeachRC | Dec 10, 2020 @ 10:26 AM | 8,413 Views
This Tamiya Desert Gator (DT-02) wasn't in the best shape but it was still working! I took it apart and cleaned everything and replaced some parts!
The desert gator body was difficult to get, therefor i replaced it with a Sand Viper body!

For more info see my website: https://www.shonanbeachrc.com/rc-reb...dt-02-rebuild/

Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccar #rccars #sandbuggy #rcbuggy #rctruck #rctruggy #tamiya
Posted by ShonanBeachRC | Dec 09, 2020 @ 11:45 AM | 7,518 Views
In this video I took my HBX Protector (12815) with a brushless upgrade outside for some fun on a 3S Lipo. I can totally recommend the upgrade. It has enough speed on 3S and it becomes more fun! But... The stress on the spur gear is a lot higher, and it's plastic, so the spur gear wears off quickly!!
I'm hoping to find a metal spur gear for the HBX Protector (12815) but....

HBX Protector (12815) Buy it here!
https://www.banggood.com/custlink/GmKhJsQric
or here!
https://s.click.aliexpress.com/e/_d72EIYF

Feiyue FY-S3 Servo Buy it here!
https://www.banggood.com/custlink/m3vYJAArPt

2845 motor Buy it here!
https://www.banggood.com/custlink/Gv3ycsQCVg
or Here!
https://s.click.aliexpress.com/e/_dWT9TBz

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccar #rccars #hbx #sandbuggy #rcbuggy #rctruck #rctruggy #haiboxing

HBX Protector (12815) brushless, some fun and should you upgrade? (6 min 6 sec)

Posted by ShonanBeachRC | Dec 08, 2020 @ 07:07 PM | 6,018 Views
In this video I took my HBX Protector (12815) with a brushless upgrade outside for a speed run on a 2S and 3S Lipo. I can totally recommend the upgrade. It has enough speed on 3S and it becomes more fun! But... The stress on the spur gear is a lot higher, and it's plastic, so the spur gear wears off quickly!!

HBX Protector (12815) Buy it here!
https://www.banggood.com/custlink/GmKhJsQric
or here!
https://s.click.aliexpress.com/e/_d72EIYF

Feiyue FY-S3 Servo Buy it here!
https://www.banggood.com/custlink/m3vYJAArPt

2845 motor Buy it here!
https://www.banggood.com/custlink/Gv3ycsQCVg
or Here!
https://s.click.aliexpress.com/e/_dWT9TBz

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

HBX Protector (12815) brushless upgrade speed run on 2S and 3S Lipo (5 min 4 sec)

Posted by ShonanBeachRC | Dec 07, 2020 @ 02:40 AM | 4,720 Views
Some time ago I upgraded my HBX Protector with a brushless motor! It can run on 3S but haven't tried it yet. Soon I will take it outside for some speed runs on 2S and 3S and some bashing and see how it holds up!!

More HBX Protector: https://www.shonanbeachrc.com/rc-car...hless-upgrade/

Youtube: https://www.youtube.com/channel/UChN...q0Mz5IYRdXY18w
Twitter: https://twitter.com/beach_rc
Minds: https://minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#hbx #rccars #rccar #rcbuggy #rctruck
Posted by ShonanBeachRC | Dec 06, 2020 @ 09:42 AM | 4,988 Views
Working on my Tamiya Super Hot Shot Rebuild! Only thing left to do is painting the body!
Any suggestions for the color?

Please visit my website! https://shonanbeachrc.com
Youtube: https://www.youtube.com/channel/UChN...q0Mz5IYRdXY18w
Twitter: https://twitter.com/beach_rc
Minds: https://minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts
Posted by ShonanBeachRC | Dec 03, 2020 @ 08:03 AM | 8,298 Views
After driving the ZD Racing Thunder ZMT-10 (10427-S/9106) on the beach, the motor, of course, had some sand in it! In this video I take the 3650 motor apart, clean it and put it together! it's actually quit easy to fix a 3650 brushless motor! But I will close the holes in the motor with some tape!

If you like to buy the ZD-Racing Thunder ZMT-10 (10427 - S / 9106) :
https://www.banggood.com/custlink/vvDycOQQfN

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

Fixing the 3650 brushless motor of the ZD Racing Thunder ZMT-10 (10427-S/9106) (6 min 47 sec)

Posted by ShonanBeachRC | Nov 30, 2020 @ 11:37 AM | 8,371 Views
In this video I took my HBX Hailstorm (18858) out to the park for a speed run and some bashing! The HBX rc cars are amazingly strong and I really like them!
The top speed was a bit disappointing in comparison to my speed run last year!

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

HBX HAILSTORM:
http://s.click.aliexpress.com/e/dz7JgWEU

SERVO:
GOTECK GS-9025MG 9g MG90 Metal Gear Servo:
http://s.click.aliexpress.com/e/qokdFigs
-------
MOTOR:
RC 2435 KV4800/4500/3300 4P Sensorless Brushless Motor with 25A Brushless ESC for 1/16 1/18 RC Car Off Road Truck
http://s.click.aliexpress.com/e/EJGYKv9Q

Hobbywing QuicRun WP-16BL30 Brushless Speed Controller 30A RC Car ESC + 2435 4500kv motor+ programe card
http://s.click.aliexpress.com/e/4yADwuwk

https://www.banggood.com/custlink/DmGvnIGkkV

SHOCKS: (make sure you get 4 of the same length)
Hydraulic Metal Front Rear Shock:
http://s.click.aliexpress.com/e/tETWhnLw

DRIVE SHAFT:
HBX 18858 1886 18857 Drive Shaft Metal:
http://s.click.aliexpress.com/e/2i2oo52C

TRANSMITTER + RECEIVER:
https://www.banggood.com/custlink/GKK3nImTKc

HBX Hailstorm (18858) brushless upgrade, speed run and bash! (9 min 28 sec)

Posted by ShonanBeachRC | Nov 29, 2020 @ 07:56 AM | 9,446 Views
I hope I can start really soon with this Tamiya TNX/TGM-02 Brushless Rebuild!
I have an 3670 motor with 120A ESC but I'm not sure is that's strong enough for a 1/8 scale Tamiya TNX/TGM!
Maybe an 4068 motor is better?

Let me know what you think?

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts
Posted by ShonanBeachRC | Nov 29, 2020 @ 05:12 AM | 9,628 Views
Had some fun at the beach again! I definitely need sand tires to get on top! The sand is really though on the ZD-Racing Thunder (ZMT-10 / 10427 - S / 9106) and also the 3S lipo I guess, so this time I broke it! I will have to take it apart and fix it! (next vid!)
I really like the ZD-Racing Thunder ZMT-10 / 10427 - S / 9106! I think it's a good beginners car, cheap, quite fast and strong!

If you like it buy it here:
https://www.banggood.com/custlink/vvDycOQQfN

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars #banggood

ZD-Racing Thunder (ZMT-10 / 10427 - S / 9106) on 3S lipo! Can we get on top? (14 min 20 sec)

Posted by ShonanBeachRC | Nov 29, 2020 @ 12:43 AM | 9,521 Views
Hi everyone! This is part one of my rebuild of a Tamiya Thunder Shot. it's in quite a good shape. In the next video's i will dissemble it and clean it. What i didn't mention in the video is the body for this car. It's also difficult to find but i found some maker in Canada i think, who makes re-releases of the thunder shot body, but these are quite expensive.

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

Tamiya Thunder Shot Rebuild (Part 1) (1 min 58 sec)

Posted by ShonanBeachRC | Nov 28, 2020 @ 08:39 PM | 8,102 Views
This is part 2 of the ZD Racing Thunder ZMT-10 (10427S/9106) Rebuild. I'm still not sure what the problem is but I kind of think it could be the spur gear! It's a plastic gear and it's a bit damaged.
There are steel spur gears, so I'm think to order one of those!
Part 3 will be assembly!

If you like to buy the ZD-Racing Thunder ZMT-10 (10427 - S / 9106) :
https://www.banggood.com/custlink/vvDycOQQfN

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars #banggood

ZD Racing Thunder ZMT-10 (10427S/9106) Rebuild part2 (8 min 25 sec)

Posted by ShonanBeachRC | Nov 28, 2020 @ 11:39 AM | 9,293 Views
In my last video my ZD-Racing Thunder ZMT-10 (10427 - S / 9106) lost the will to move So I have partially taken it apart! In this video a little update and possible upgrades I can do to make the ZD-Racing Thunder ZMT-10 (10427 - S / 9106) more suitable for the beach! If you have any ideas let me know in the comments!

If you like to buy the ZD-Racing Thunder ZMT-10 (10427 - S / 9106) :
https://www.banggood.com/custlink/vvDycOQQfN

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars #banggood

ZD-Racing Thunder ZMT-10 (10427 - S / 9106) Rebuild! Update and planned Upgrades! Part 1 (2 min 37 sec)

Posted by ShonanBeachRC | Nov 28, 2020 @ 09:54 AM | 9,133 Views
I went to the beach again with my ZD-Racing Thunder (ZMT-10 / 10427 - S / 9106) on 3S lipo, this time to conquer the great wall of sand! In the end I broke it, guess the electronics are not that waterproof! I really like the ZD-Racing Thunder ZMT-10 / 10427 - S / 9106! I think it's a good beginners car cheap, quite fast and strong!

If you like it buy it here:
https://www.banggood.com/custlink/vvDycOQQfN

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars #banggood

ZD-Racing ZMT-10 / 10427 - S / 9106 VS. The great wall of sand on 3S lipo (can he make it?) (6 min 26 sec)

Posted by ShonanBeachRC | Nov 28, 2020 @ 09:11 AM | 8,398 Views
Out of the box I really do like the HBX Protector (12815)! This is my second HBX and both of them are above expectation! They are reasonable cheap and amazingly strong! So far I only broke the servo arm after I hit a wall. Itís not the fastest car, but itís also not needed that much I guess. BUTÖ. I like a bit more power, so Iím upgrading it with an brush-less motor. Iím using an 2845 3930KV Sensor-less Brushless Motor with an 35A ESC. I think this is the maximum motor size that fits. The servo is not a standard size servo, itís a bit smaller. Therefor i used the Feiyue FY-S3 2.8KG Servo which has metal gears!

HBX Protector (12815) Buy it here!
https://www.banggood.com/custlink/GmKhJsQric
or here!
https://s.click.aliexpress.com/e/_d72EIYF

Feiyue FY-S3 Servo Buy it here!
https://www.banggood.com/custlink/m3vYJAArPt

2845 motor Buy it here!
https://www.banggood.com/custlink/Gv3ycsQCVg
or Here!
https://s.click.aliexpress.com/e/_dWT9TBz

Please visit my website! https://www.shonanbeachrc.com/
Twitter: https://twitter.com/beach_rc
Minds: https://www.minds.com/shonanbeachrc/
Parler: https://parler.com/profile/ShonanBeachRC/posts

#rccars

HBX Protector (12815) Brushless Upgrade on 2S lipo! (4 min 9 sec)