I just got through with my Tarot 650 Sport build. I was very careful to check that all the rotations are correct.
1. Motors are rotatiing in the right direction on each postion on the multirotor according to the
3DR wiki. Note that the motor numbers are not simply clockwise around the quad, but the motor test in Mission Planner does not follow the motor numbers and simply starts one motor at a time in a clockwise direction.
2. The Clockwise (CW) and Counter Clockwise(CCW) props are on the right motors A clockwise motor needs a clockwise prop. The reverse rotation props are the clockwise, sometimes known as "pusher" and sometimes marked with an "R" like 9045R. The so called normal props are the counter-clockwise.
3. The Radio Calibration is correct in Mission Planner and the sticks move in the correct directions. Note that the Pitch must move the slider bar DOWN in Mission Planner when you move your pitch stick "forward". All the other sliders move in the same direction as the stick moves.
...Continue Reading