Posted by Xemulxe | Today @ 04:48 AM | 30 Views
This is the first launch of my new fishing and underwater video boat. I hope now there will be enough space for me under the normal window to the underwater world, and under the submersible module of underwater video surveillance, and under the fishing gear and everything else

Following the launch. Weight may be slightly less than the estimated 50 instead of 60kg. Everything else is basically ok. Because of the submersible video module, I was especially worried about lateral stability, but even here everything is ok. Stability with a margin.

RiverSpirit - first run of my rc / fpv ship (1 min 11 sec)

Posted by Balsaworkbench | Today @ 02:14 AM | 87 Views
This one is sure to be popular. It's the 20 size version of the Bingo! by Doc Mathews. Ace used to sell kits of the Bingo, Bingo 40, and the Big Bingo (120 size) but as far as I know they never produced the 20 size.

It should be perfect for that Saito 30 or OS 26 Surpass that you have sitting around looking for a home.
Posted by rclad | Today @ 12:06 AM | 124 Views
Air Masters RC Airfield
North Bend, OH
Friday, June 14, 2019

Hang on for a wild ride! I was flying my best inside/outside loop yet, with a 2 of 4 point roll at top, until things went horribly wrong.

IMAC Practice Flight - Intermediate Sequence - June 14, 2019 (10 min 15 sec)

Posted by marblekit | Yesterday @ 09:51 PM | 157 Views
Posted by Wingmanrc93 | Yesterday @ 09:22 PM | 180 Views
This kit started as a HK 500GT, but due to some faulty parts upon building it. But now had Align 500 frame,wish, mixer arms. Had a mishap with the tail belt(?) It broke so I added an EXI500 tail boom(same as the gt500 tail)

Turnigy typhoon 1900kv motor
YEP 80 amo esc
Spektrum H5010 MG on cyclics
Futaba 401/9254
AR610 2.4ghz with satellite
Running 2-3s 2800 30c lipos
Jazz 425 CF blade (GOODNCHEAP)/KDBB tail blades
I got 7+ min of flight time on a nice sport flight.

7 min of flight for 31.99 a set of batteries is a great flight time from the 3-4 min I was getting.

Flybared helis fly so nicely. It's a shame to see them fade away.
Posted by UnknownForces RC | Yesterday @ 08:51 PM | 186 Views
1. Modulize design, compact and logical layout , maximizing interior spacing.

2. Utilize a full symmertrical design, with a forward /rearward weight bias of 4:6, combine to form a perfectly balance chassis.

3. With roughly a 300pcs counts on assembly screws, compare with a typical 600pcs+, makes maintenance works fast and efficient.

4. Minimal tools requirements, 4 different sizes hex tools can dismantle 90% of the car.

5.With 5th scale power inside a chassis comparable with normal 8th scale in size, the result: A chassis that are easy to carry around while having monster power to negate any terrains.
Posted by doublejizl | Yesterday @ 04:05 PM | 268 Views
I was looking at getting these motors for a 3 inch 4s build, but noticed that the shaft diameter on them is 2mm. Does anyone know of any props that would fit this diameter shaft? Most of the ones I've looked at are either 1.5mm and 5mm for motors that need prop nuts.
Posted by RCvertt | Yesterday @ 02:03 PM | 321 Views
Movement is being made with the FAA to get the Apollo-XI RC flying field back up and running. Thank you Jason for staying on top of this for us all.
Posted by Merch | Yesterday @ 06:18 AM | 452 Views

Why ow why in a whoop frame,guess it will be in all toothpick frames soon.

Eachine Cinecan 85mm 4K Cinewhoop 2-4S FPV Racing Drone BNF/PNP F4 PRO V3.0 Caddx Tarsier Cam DVR

Brand Name: Eachine
Item Name: Cinecan 85mm 4K Cinewhoop
Wheelbase: 85mm
Size: 115mm*115mm*55mm
Weight: 66g(without battery)
Weight:91g(with Original 3s 300mah Lipo battery)

Spare parts specifications:
Motor Mode: EX1103 KV7000
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
No.of Cells(Lipo):2S-4S
Flight controller (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter...Continue Reading
Posted by cuavlindy | Yesterday @ 04:41 AM | 405 Views
hi dear friends :

how are you today ? Hope everthing goes well with you all!

Aliexpress 6.18 MID-YEAR SALE coming, big discount up to 30% off ,

if you need come and check it in our shop:

if you need whole sale price , just feel free to contact us !

We are CUAV manufacturer,and our company have researched & designed Pixhack V5, V5+, V5 NANO, Pixhack V2,Pixhack V3 , Pixhawk flight controller and so on .
and C-RTK GPS,M8N GPS , and 4G LET, LTE SE, P900 Radio, Xtend, SX Radio Telemetry, 3DR data link , wify link and so son.

Later will online more and more CUAV producs .

Thanks for you all support!!!

Any question, just feel free to contact us !

Posted by DoubleEagle | Yesterday @ 01:44 AM | 423 Views
2019 New: remote control toy farm tractors!!! Ride them around your garden, farm or flat. Hot summer is not a problem any more as the tractor with sprinkler barrel will cool down any surface you like!!! If you live in a city or town you can play with it by sprinkling the water and writing numbers, letters of either words on the ground. In the video we managed to write number 8!!! It was fun

Double Eagle (China) Ltd. is a professional toy manufacturer, with over 30 years of history, specialising on the manufacture of RC and functional toys.

Item No: E355-003 Tractor with sprinkler barrel
Item No: E356-003 Tractor with a bucket
Simulated sounds and lights
Remotely controlled water sprinkler
Remotely controlled bucket
Scale 1:16
Battery: 3.7v, included; radio control batteries are not included (2 of AA 1.5v)

For more remote control/building blocks toy products visit:
Business enquires: [email protected]
NEW: Remote Control Toy Farm Tractors (Double Eagle 2019) (1 min 13 sec)

Posted by UnknownForces RC | Yesterday @ 12:23 AM | 446 Views
Dual Steering System
Frame layout symmetrical design
Quick disassembly design
Modular design
Posted by Bill M - RC | Jun 16, 2019 @ 09:01 PM | 479 Views
Hi fellow rc pilots & rc enthusiasts

This Frsky Ultralight XM mini receiver with up To 16CH for RC Drone FPV Racing review includes package, contents, specifications, connecting, binding & demo flight video clips.

Get this FrSky Ultralight XM Mini Receiver Up To 16CH for RC Drone FPV Racing here now:

Frsky Ultralight mini receiver review (7 min 47 sec)

Posted by mtdoramike | Jun 16, 2019 @ 05:42 PM | 499 Views
This was the first RC boat build that I did. I finished her last year.
Posted by trigstupp | Jun 16, 2019 @ 03:31 PM | 515 Views
I enjoy both building and flying FPV. Also enjoy reviewing the juicy HD footage after flying and sometimes making short video with music. Looking to pick up Ham licence and maybe meeting up with others to fly with. Always had special talent when it comes to electronics. I also enjoy the challenge to learn things I don't know how to do and can sometimes get a bit of tunnel vision focused to learn or figure out the puzzle.
Posted by JSKYVOLT | Jun 16, 2019 @ 03:15 PM | 534 Views
After many years of concentrating on building a post and beam garage and servicing cars, house systems etc., finally resuming r/c. Many if not most planes need a little finessing to get them in good shape. The flashback kit I bought here (as jim e) and the canopy was crinkled, never said a word to seller ) was hidden by instructions in sealed sleeve so not his fault) and then proceeded to make it worse. Have to redo magnet system or use another method to secure canopy (Velcro?). The foam sportser is ready, just do not like how the motor goes wild if you turn off the tx while battery is hooked up-probably the airtronics rx so may change. My fry sky equipment is now "legacy" but still should work okay. Here's to hoping to,learn knife edge after 37 years of flying r/c. Oh and I hope to get a lot more organized!!
Posted by rclad | Jun 16, 2019 @ 01:43 PM | 651 Views
Air Masters RC Airfield
North Bend, OH
Friday, June 14, 2019

It was a windy day - 15 mph with 30 degree crosswind - but I wanted to try out a second camera on my EF 95" Extra 330SC-E. This one was taped to the top of the canopy facing the tail.

This was the fourth flight of the day, the third with cameras. It wasn't my best sequence work - the negative snaps exiting the P Loop were both off - but it was the only flight that I remembered to clean the splattered bugs off the canopy before takeoff!

These videos help me spot all of my errors that I miss from the ground.

IMAC 2019 Intermediate Practice - June 14 (10 min 7 sec)

Posted by Mad_angler1 | Jun 16, 2019 @ 01:16 PM | 692 Views
I have decided to start a thread on the new The DJI ROBOMASTER S1 Educational Robot.

This will be a place where users and owners can post, share info and tips on using this new product from DJI, I will be getting one as soon as I possible can and will be keeping this thread updated with any help, support and relevant information that I can as time goes on.

As this is located on my blog I will be posting any videos I make on it from my channel and moderating this thread my self. The S1 is an educational robot, I welcome everyone to post their own user experiences, build logs, issues, problemss in this thread as you would in any other thread, however any Anti DJI post ,Politics and anything I feel is not in keeping with this being a educational tool and helpful to people will be removed.

I also ask everyone to post in a helpful, supportive and family friendly manner as this product is aimed at young people as well as adults, let’s all help each other, learn from each other and work together to get the most from the ROBOMASTER S1

If you would like to support me or my channel you can order the DJI ROBOMASTER S1 from the below affiliate link.

Introducing the ROBOMASTER S1

DJI’s first ground robot based on the ROBOMASTERS Robotics competition DJI Sponsor in China.

DJI - Meet the RoboMaster S1 (3 min 14 sec)


The RoboMaster S1 is a game-changing
...Continue Reading