Wind burn's blog View Details
Posted by Wind burn | May 07, 2021 @ 04:26 AM | 3,460 Views
SCOUT The best friend I ever had!
Posted by Wind burn | Apr 17, 2021 @ 12:55 AM | 4,877 Views
Here's a 2 meter whisper repair I did,by making a mold of the airfoil from an undamaged portion of the wing to make a replacement skin piece to graft in without using foam or any fillers on the outside. I didn't post all of the pictures but the process was the same for the top and bottom repair....Continue Reading
Posted by Wind burn | Apr 15, 2021 @ 04:38 AM | 4,628 Views
So this is a pike perfection that came to me with a shattered tip.The repair was done several months ago,but some have said I should post some photos of the repair process I use. I've compressed this down because there are 83 photos during this repair but these will show the main process. ** There are many ways to repair hollow molded wings everyone has a preferred method this is just mine. The wing remains hollow, and I get good results without using body fillers or foam internal fillers. and In the end the repair is as close to the original in layup and materials as I can get.***
Here goes! ...tap view all images....Continue Reading
Posted by Wind burn | Apr 14, 2021 @ 10:11 PM | 4,500 Views
I bought this X-21 with a blemish from my buddy Screamin' Eagle great guy! and yes he landed it like it still had the whole wing hahaha! Can't wait to get it in the air. I'll post pics when it's finished and flying stay tuned!
Posted by Wind burn | Apr 14, 2021 @ 09:53 PM | 4,472 Views
My speedo fish scale paint job.
Posted by Wind burn | Apr 14, 2021 @ 09:27 PM | 4,518 Views
This repair was done without filler or cutting in to the skin, and then I added the two tone blue paint to the tips for the customer. Beautiful sailplane!
Posted by Wind burn | Apr 14, 2021 @ 09:16 PM | 4,279 Views
This is a repair I did recently it was a 3 piece fuse when I got it! 0 bondo used and after stripping the paint and previous repair slag. And doing the repair and repaint was about 1.9 ozs. Heavier as finished product....Continue Reading
Posted by Wind burn | Apr 14, 2021 @ 08:25 PM | 3,961 Views
Me building a Roebers 4mtr. Discus for a customer in 96'.
Posted by Wind burn | Apr 14, 2021 @ 08:15 PM | 3,901 Views
My 2 mtr. Hollow Franken V3. 2 mtr Blade tail, Super vee 2 mtr. Fuse and Hollow molded wing.
I did the paint by the mesh method in flouro green and deep blue,
it really looks nice in the sunlight.
Posted by Wind burn | Apr 14, 2021 @ 08:04 PM | 3,765 Views
This is my custom carbon Renegade #7 I bagged with 3/16 tip dihedral and tubed ailerons making this the only Renegade I've seen with actual poly dihedral (very mild) but poly just the same. It also used to be V-tail, but I converted it back feeling it looked and flew best with the stock tails, but it was part of a test bed of experiments when I was 2nd. Owner of CR. Just had to check !
Posted by Wind burn | Apr 14, 2021 @ 07:52 PM | 3,707 Views
My 1st carbon Renegade,2nd race at Davenport ISR .After someone stepped on my Raider...I had to race this as my backup.hahaha finished 8th. Ok for 60" in open class! Notice the lead taped on top of the wing to get to max allowable ballast. Not exactly legal but they were flexible on the rules so I didn't cry on the 7 hour drive home.
Posted by Wind burn | Apr 14, 2021 @ 07:45 PM | 3,427 Views
My Nemesis 60' in PPG Harlequin.


Posted by Wind burn | Apr 14, 2021 @ 07:41 PM | 3,105 Views