Posted by holtneil | Today @ 11:00 AM | 321 Views
Hi guys after the motor failed and my best mate Steve fixed it for me ,I refitted it in the goblin and did test flight OMG the heli was doing a belly dance the rotor disc was steady but the heli was doing a belly dance under it the ESC is a YGE and for some strange reason the ESC has lost its memory so had to do a reset up , well that fixed it
That was a strange going on
Posted by UnknownForces RC | Today @ 09:06 AM | 384 Views
The medium gearbox of GR1 4WD SOLID REAR AXLE TRUCK (0 min 13 sec)

The medium gearbox of GR1 4WD SOLID REAR AXLE TRUCK is shaped like an owl (the part of the eye is a secondary oxidation process, commonly known as two-color oxidation)
Posted by UnknownForces RC | Today @ 09:03 AM | 386 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 36 sec)

GR1 4WD medium gearbox shell laser pattern (needs to oxidize again, the pattern will become other colors)
Posted by UnknownForces RC | Today @ 09:02 AM | 388 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 15 sec)

Nylon ball end of GR1 4WD, stainless steel ball head, careful assembly when processing, reduce the shaking and virtual position caused by the error.
Posted by UnknownForces RC | Today @ 09:00 AM | 392 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 17 sec)

GR1 1/5 4WD SOLID REAR AXLE TRUCK steering (6 bearings). Metal, nylon combination, strength and toughness and double buffer spring for better protection of the servo.
Posted by UnknownForces RC | Today @ 08:58 AM | 395 Views
UFRC GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 18 sec)

The middle gearbox parts processing of GR1 1/5 4WD SOLID REAR AXLE TRUCK.
Posted by GroundControlRC | Today @ 08:43 AM | 385 Views

Review Part1 - Mobula 7 Brushless Micro Quad - 1S-2S

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Mobula7 #PowerWhoop

Here's a link to the Video:

Well, I completely wore out my Brushed Tiny Whoop a few Months ago so I decided to get a more powerful Micro Brushless Quad that I could fly indoors as well as outdoors.

The Mobula 7 seemed to fit the requirements and has gotten lots of positive reviews.
I'll list the Specs, things that give me pause, some things that perhaps could have been done better, Tips, Problems & Solutions, as well as some of the Cons I've heard from other reviewers.
I'm way out of practice with Quads so rather than try to impress you with my flying skill I'll show you how easy, or hard, it is to fly this Quad from the perspective of someone that's so out of practice they might as well be a Newbie ;-)

Part 2 will be outdoors on 2S ;-)
Nothing fancy but we'll see how well someone can progress in skill with this Micro Quad.

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to this Quad as well as Spare Parts, Upgrade Parts, & LIPOs:

Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop (***Select Receiver Type YOU need!)

Happymodel 3.8V 300mAh 30C 1-2S Lipo Battery PH2.0 Plug for Mobula7 Snapper6/7/8...Continue Reading
Posted by VicT | Today @ 06:23 AM | 581 Views
The stock landing gear is good for rough ground or sand/snow/mud as the large tires provide added floatation and little rolling resistance. Once in the air though the large frontal area provide drag. The wire gear sags and gives negative camber when on the ground. You can bend the axles down for positive camber but now she looks like Cessna Birdog! because the axles are approximately .75 inches aft of the leading edge the tail wheel has less weight compared to axles that are in front of the leading edge. This and rolling resistance can cause nose overs while landing and decelerating on certain surface conditions. Prop strikes and fin damage can result that might end further flying for the day. Here is an alternative landing gear system that reduces the above negative aspects. Like any modification be careful and responsible when operating and proceed at your own risk.

I chose the #132 Robart Scale Diamond Tread 2.75 inch tires because of their low bounce properties and looks. The landing gear is the Dubro Super Strength .35-.61 size. Dubro Axle Shafts 5/32 are bolted to the injected molded gear after drilling out a 5/16 inch hole. There is a pilot dimple on the gear but there is room for a different hole for a slightly lower axle location.

The Maule has sufficient foam in front of the stock plastic landing gear parts. Plywood that is 1/4 inch thick by 3 5/8 wide by 2 inch long is used with 3/32 inch thick plywood longerons to carry the stresses to...Continue Reading
Posted by Monkey Hobby | Today @ 01:48 AM | 727 Views
New Product !! Volantex Sport Cub 500 4 Channel Beginner Airplane with 6-Axis Gyro System and One-key Aerobatic Function (761-4) RTF

It is in stock now.

Check more detail in this website:

【INTEGRATED GYRO EASY TO CONTROL】6-axis gyro ultra stable self stabilization of gyro system. Powerful over-grade motor system and 4 channel allow easy controlling to do aerobatic flying.
【BEGINNERS' FIRST RC AIRPLANE TRAINER】3-level flight control assists(Beginner level with full assist/ Intermediate with partial assist/ Expert for manual control) help beginners learn to fly step by step.
【GREAT AIRPLANE FOR OUTDOOR ADVENTURE】2.4Ghz Radio Control distance of over 320 ft, the strong antijamming capability allows to hold a small flight club party between you and your friends.
【ONE-KEY AEROBATIC】This function includes flip and roll, means that the airplane can do aerobatic automatically in two direction if you control it in beginner mode, just need to click the aerobatic button and then turn the right stick up to max position or down to min position. Everyone could enjoy the aerobatic flight even if he/she is a new pilots.
【FULLY ASSEMBLY READY TO FLY】Fully assembly to get the plane take off within 1 minutes out of box. Portable package to go with you everywhere.


Brand: VolantexRC
Length (in): 13.7800
Wingspan / Width (in): 19.6900
Flying/Running Weight (lbs) :0.11
Material: EPP
Prop Size (in): 5″
Motor: 10mm Diameter Coreless Motor
Speed Control: Gyro Integrated
Servo: 2-gram Servo * 3pcs included
Recommended Battery: 3.7V 360mAh Lipo
Charger: USB Charger
Radio: 2.4Ghz 4-Channels
Flaps: No
For Age Over 14 years
Experience Level: Beginners
Where To Play: Outdoor
Is Assembly Required: No
Posted by Monkey Hobby | Today @ 01:33 AM | 733 Views
New Product !! Volantex Mustang P-51D 4 Channel Beginner Airplane with 6-axis Stabilizer System and One-key Aerobatic (761-5) RTF

In stock now!!

It is a good plane for begineer.


Brand: VolantexRC
Length (in): 15.7000
Wingspan / Width (in) : 12.5000
Flying/Running Weight (lbs): 0.1
Material: EPP Foam
Motor : 10mm coreless motor
Speed Control: None
Recommended Battery: 3.7V 360mAh lipo battery
Charger: USB Cable
Radio: 2.4Ghz 4-Channel
Flaps: No
Flying Time: 14 minutes
For Age Over: 14 years
Experience Level Beginners ~ Expert
Where To Play: Outdoor
Is Assembly Required: No

【Easy to control】4 channel control with Aileron, great sport performance, easy to do aerobatic. 6-axis gyro stabilizer provides superb stable flying even controlled by rookie pilot. Suit for both beginners and experts.
【One-key Aerobatic】This function includes flip and roll, means that the airplane can do aerobatic automatically in two direction if you turn it into beginner mode and use this function. Everyone could enjoy the aerobatic flight even if he/she is a new pilots.

【Durable Material】EPP composite material, high flexibility, excellent recovery, not easy to break.
【Suitable for multiple locations】Apply to indoor and outdoor flight, longer remote control distance and 60g flying weight.
【Fully Assembly】True ready-to-fly (RTF version) package allows the plane to take off within 2 minutes after you open the box.

You can purchase in this website:
Posted by old4570 | Today @ 12:38 AM | 773 Views
Free Flight SU-27 found on Feebay ..
With discount , cost around $5 USD or less .

Wow ! Came fully bent in the post ( see pictures ) ..

But it was an opportunity to test some ideas I had .
Got out the old clothing iron , bumped the temp to 80deg C and proceeded to iron out the wrinkles .
Nope , not doing a good job !
Bumped the temp to about 120deg C and I was just starting to melt the foam ..
At just over 90deg C the iron was doing a half decent job .
I had 2 layers of house hold paper between the foam and the iron at all times .

But there was a lot of bent to go around .
The motor had got bent as well and would not straighten out .
So I had to cyno it reasonably straight .

Assembling !

So the parts have these little tabs that get pushed thru holes .
The foam is SOFT , I mean soft .
Best to use needle nose pliers , very carefully push the pliers into the hole and just barely thru ..
Grab hold the TAB , and pull it thru ..
Much easier than trying to push the tabs thru the very small tight holes .

Once assembled .. Its not overly bad !
CG looks to be about right , and you just need to tweak the control surfaces for a decent glide .
It's windy outside , so the SU 27 glides like a tissue ..
Really need some UBER low wind ( no wind ) or possibly a decent indoor space .
Posted by Hobby Details | Yesterday @ 08:36 PM | 1,160 Views
1/10 On Road Alu Drifting Car Wheels 5Star Style 4pcs/set
Dia: 52mm, Width: 26mm Hex: 12mm
Wholesale Price please PM or contact me at: [email protected]
Posted by LemonC | Yesterday @ 03:27 PM | 1,875 Views
FalcoX BeeBoppin (8 min 1 sec)

Really loving this falcoX stuff. If you are tired of trying to tune consider giving a flightone fc a shot in the future.
Posted by unboxingexp | Yesterday @ 11:29 AM | 2,326 Views
Brand Name: Goteck
Item NO.: GS-1502
Item Name: Analog micro servo
Size(mm): 1.8x1.4x0.05
Torque: 80g-cm
Weight: 1.5g
Power supply: 3.7V/5V

Micro linear servo (1 min 2 sec)

Posted by GLSJr | Yesterday @ 11:05 AM | 2,428 Views
Are drill millimeters the same as bullet millimeter sizes (3,4.5,etc)?
Posted by carlosjml4 | Yesterday @ 08:46 AM | 2,870 Views
Enjoying FPV flight and testing functions in video editing. I hope you like it!

Have fun with my videos and help me with the subscription, it only costs you a click ;-)) Thank you !!!


Posted by CarreraGTSCS | Yesterday @ 06:00 AM | 3,213 Views
Posted by prachar223 | Oct 13, 2019 @ 10:15 PM | 3,560 Views
Hello all,
I wanted to share a video of the maiden flights on the Imperial Knight Twister built and flown by William C. Nichols of Grove City, Ohio. The Knight twister biplane has a special part of history for Ohio. Don Fairbank's was from Cincinnati, Ohio and the full scale version of this plane is on display at Sporty's Pilot Shop located in Batavia , Ohio. Furthermore, for Bill Nichols, growing up in New Philadelphia, Ohio he would often see another version of the Knight Twister being flown by Tony Sabler.

In the early 2000's he built a 1/2A version of the Imperial Knight Twister, this is powered by a Norvel .074 motor and flies great! Always wanting to build a larger version it happened to be fate, when a plan, cowl, wheel pants, and the long discontinued Magna-lite material the original construction article called for was found at a swap meet in Washington Courthouse, Ohio. It was without delay that this was purchased. It took Mr. Nichols approx 2 years off and on to complete the Knight Twister and after going on a two show model tour and taking "Best of Show" at both events, the biplane was taken up for a maiden earlier this week. The model won "Best of Show" in 2018 at the Westerville Model Swap Shop/Show and at the Lancaster Model Swap Shop/Show both located in Ohio.

Below is a video of the models maiden flights, the aircraft flies great, was balanced perfectly and only required a few clicks of down trim.

The model is of 1/3 scale and...Continue Reading