Dear Fans,

As we known that we had a unusual year of 2020 and we are sad that many areas are still under the epidemic of Covid-19. Now with the great festivals are coming, ISDT is wishing you all a Merry Christmas and a New Year bright with health, joy and success. ISDT will sincerely thank you for all your supports with better products and service in the future.

Thanks,
Isdt Team

Dear Fans,

Thanks our development team with fast and powerful speed for launching our new AC/DC Dual Channel Fast Charger K2. An another choice when you need faster and stronger charging power. You can see more details now on our website:https://www.isdt.co/k2.html?lang=en
Please be no hesitated to inquiry us or your local distributors if you can't wait to have it.
Specifications
Input voltage: AC 100~240V / DC 10~30V
Output voltage: DC 1~30V
Max. input current: DC 35A
Charging current: 0.2~20A x2
Discharging current: 0.2~1.5A x2
Balance current: 1.5A/Cell Max
Max. discharging power: 15W x2
Max. charging power: AC 200W / DC 500W x2
Abnormal voltage alarm: Support
Incorrect cell count setting alarm: Support
Supported battery types and cell count: LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-12S, NiMH/Cd 1-16S
Parallel charging power and current: 800W/35A
Parallel discharge power and current: 30W/3A
Working temperature: 0~40℃
Storage temperature: -20℃~60℃
Dimension: 142x135x64mm
Weight: About 700g

Dear All,

This is Belia at ISDT. Here I represent our company and looking for our direct distributors in UK, Italy, Poland and Czech Republic.

What We Have:
We owns popular reputation products with few after sales problem which is so attractive . We achieve 1.7% defective rates for our 2nd generation products and it will be much better for the 3nd generation which starts with items we developed since end of last year. That's why we can keep on cooperating with our distributors very well in past five years.

What You Will Have:
While, you can find reasonable space in distributing our AC chargers and advanced DC chargers , industrial modulate .And we will think it over for future items also. We usually have one distributor in one country for RC range, No more than two. And will forward all inquiry to our direct distributor in the same country.

Why Choose Us:
ISDT located at the most innovative technology gathering area in Shenzhen of China. With professional and experienced development team to achieve
the most compact but powerful chargers and fastest development speed of new products in RC range.

Know more about our company and our products please see here: https://www.isdt.co/?lang=en
Any inquiry of dealership with us please contact me: [email protected]

Thank you all for your attention on this issue.

Best Regards,
Belia

Dear ISDT Fans,

Today we would like to list some common problems you might meet when upgrade our chargers, and here we will tell you how to solve.

a. 'Waiting for device' , It happens when the USB cable you using for upgrade is without data transmission function, and you need to change with another good quality one.
b. ISDGO APP as virus, Our manager for website is handling with this problem to obtain trust certification for our software, please make our software safe to use.
c. Recognition failed. This happens when abnormal internet connection or the unsteady server behavior, please connect the internet and try to update again.
d. Device information does not match , if you come across this problem when upgrade, it might be caused by wrong information obtained by charger, you could click the UPDATE again, and problem will disappear.

Hope this post will help you, please no hesitate to forward your suggestion and feedback to us if any.

Best Regards,
ISDT Team

Dear All,

After launching Dual Channel Smart Charger P30, we have got great feedback from users, as it's super charging power in a compact size. Single channel Max. 1000W and whole model Max. 1500W,

In this season, there are two NEW models P10&P20 that have been come into market, both Dual Channel and different choice of charging power for you to use with your battery. More details please see here: https://www.isdt.co/p10-p20.html?lang=en

Wish you would love this two new models.

Best Regards,
ISDT Team

Dear All,

We will take off from 1st OCT to 8th OCT for our NATIONAL DAY and MOON FESTIVAL, and we will be back on 9th OCT. I t will be a long Eight-day holiday and your message to us will be replied once we come back.

Thank you for your always attention to us!

ISDT Team

Dear Fans of ISDT Chargers,

Recently, We got Feedback from some users that they have no idea how to make voltage calibration on PD60 charger ? PD6O is tiny and no display here, yes, you will be confusing if you come across this. But actually the progress to do a calibration on PD60 is super easy. Let us guide you here;

First of all, please connect your lovely PD60 with computer via a USB cable. Then you must have a Calibrate exe. which you can download on our website, or you can ask for it from [email protected].

Make sure you need to have a 4S Lipo full charged battery for calibration. Using your multimeter or other professional device to know voltage values of each cell and the whole battery. Then connect your 4S Lipo with PD60.

Start the exe. and click CONNECT. Input your real voltages, then you can calibrate it! Please see photos attached for your reference.

What's more, here is a FacClear function on exe. Plug out your battery first and you can click it to clear factory flags.

Already knew how to calibrate for your PD60? Hope this will help you and more questions please contact [email protected]!

Thank you all,

Your best ISDT Team

Hi Guys! We are so glad to recommend our New Arrival charger model: PD60. You could never see such a tiny charger ! For more details please see our website: https://www.isdt.co/pd60.html?lang=en

Specifications
Model No: PD60
Input voltage: 5~20V
Output voltage: DC 1~20V
Max. input current: DC 3A
Charging current: 1A/2A/3A/6A
Balance current: 0.5A/Cell Max
Supported Quick-charge: QC2.0/3.0 PD2.0/3.0
This charger supports fast charge protocol
(But 5V/1A adapter input is not supported)
Max. charging power: 60W
Abnormal voltage alarm: Support
Incorrect cell count setting alarm: Support
Supported battery types and cell count: LiFe, LiPo 1~4S, LiHv 1-4S, NiMH, Cd 1-12S
Working temperature: 0~40℃
Storage temperature: -20℃~60℃
Dimension: 126x115x49mm
Weight: About 87g