Posted by r39o | Oct 12, 2018 @ 02:56 PM | 10,974 Views
This is an effective simple battery holder I have been making for the T-28 for many years.

The idea is to keep the battery from moving fore and aft after balancing.

I have rehabbed about 2 dozen T-28s. All need something. Many times a PO has done something that makes it impossible to secure the battery unless a mount like this is used.

Look at the pictures. This mount is always a Tee, but needs fitting or altering depending on the plane in for repairs.

I make the Tee out of wide tongue depressors, or maybe Popsicle sticks. (we have a box of craft sticks from Walmart.

I get the Velcro from Walmart.

I 5 minute expoxy the Tee pieces but hot melt glue it in place, as I find that most effective.

This post is to give you ideas.

This setup works well for me.....

Have...Continue Reading
Posted by bluemeane | Oct 12, 2018 @ 02:55 PM | 2,549 Views
They are sweet. They actually use a stand-off or bolt to hold the front part down on the canopy by going through the 'O' in RotorX. Then the back is held down by the canopy mount bolts.
Posted by robpob | Oct 12, 2018 @ 03:33 AM | 2,083 Views
will the frsky s6r receiver work with the frsky qx7s transmitter before i buy thankyou
Posted by camerawarehouse | Oct 12, 2018 @ 03:22 AM | 868 Views
Today has been an eventful day of announcements from digital imaging heavyweights. DJI officially launches the DJI Mavic 2 with the See The Bigger Picture event live in New York City. Earlier this month, we posted about the various rumours going around the web about the specs, release dates and newer features it may have.


https://www.instagram.com/djiglobal/


Here's what has been confirmed so far from their See The Bigger Picture event:

1. There are two models: The Pro and The Zoom. The original Mavic weighed in at 734 grams. DJI added some weight into the newer models with the Pro hitting 907 grams and the Zoom weighing in at 905 grams.

2. DJI partnered with Hasselblad for Mavic 2 Pro proving that there is no other drone and partnership of its kind in today's market. It's an historic moment in aerial imaging technology. It has a 1-inch CMOS sensor with an adjustable aperture of f/2.8 to f/11. It gives you the flexibility to capture images in bright or dim locations where you can shoot at any time of the day. It captures 4K Ultra HD with higher colour-depth and dynamic range and resolution than its predecessors. As it's a Hasselblad model, you have an access to its Hasselblad Natural Colour Solution - for improved colour and tonality in your photos.

3. The Mavic 2 Zoom is the world's first foldable consumer drone with a 1.23-inch CMOS sensor and 24-48mm optical zoom plus two times digital zoom. It gives you 96mm telephoto lens for 4K lossless zoom FHD video...Continue Reading
Posted by Hobby WOW | Oct 11, 2018 @ 10:14 PM | 7,361 Views
Good News
AOSENMA CG033 is back!!The problem we have had which is fixed and upgraded
Welcome to buy from our shop, we have it in stock now

https://www.hobbywow.com/en-lalala-p246333.htm
Posted by aben71 | Oct 11, 2018 @ 07:41 PM | 28,573 Views
Hi guys,
Just posting a survey here for my curiosity,who is you favorite drone/quadcopter manufacturer ?
Posted by Bunnyshooter223 | Oct 11, 2018 @ 07:38 PM | 8,856 Views
Saito FA-40A - 1st Tank (clip) (1 min 34 sec)

First run, very rich break in run, of my nib 40A. This is a short clip of the run. The day's temperature was likely around 72F, iirc.

Engine was running quite cool. I did run it a bit harder near end of tank.
With Hi-Speed at about ~5.5 turns out, and my limiting throttle teavel, it likely never went past 7k rpm per instryction manual.

i bought this engine off E-bay a while back. Finally made a mount for it

This is a nice engine. It is unbelievably small for the power it makes:
-Running Xoar 11x6 wood prop
-10% Powermaster
-New OS F plug (came with Saito SS)
-Engine is make 'C' btw

I noticed a new ignitor battery really helped with starting it.
Posted by mudman1959 | Oct 11, 2018 @ 06:33 PM | 9,200 Views
It started with a mess all over the work bench... But in a two day period it became something. The Flite Test "Edge" looks really good! Well why not I asked myself... So the plans were printed and cut out. Traced to the foam and hand cut. Lots of Good Rock & Roll music playing in the background, Hot Glue was flying everywhere... And it slowly emerged. The plane is a bit bigger than the original FT one as I am thinking about powering it with a over powered Brushless Motor. I cannot leave it stock! And of course there will be mods as I see the need. More to come...

I finally got the tail and the nose finished up.

...Continue Reading
Posted by burkefj | Oct 11, 2018 @ 06:32 PM | 11,212 Views
Here is another prototype for a custom kit, based on the old Estes Space Transporter America, which was a shuttle style rocket and had very small wings, so wings were upscaled, adjusted for CG, and upscaled to BT-80 size. The video shows the second flight first, the first flight is second and I over-adjusted on boost on this flight, and then adjusted the boost trim for the second flight which is a lot smoother. 38" long, 23" wingspan, 11 oz rtf using a 24mm E-6 long burn rocket motor.

Space Transporter America RC Rocket glider flights (3 min 21 sec)

Posted by The RC Guru | Oct 11, 2018 @ 05:51 PM | 1,804 Views
Does anyone know where I can buy a /5 scale hpi Baja body?
Posted by old4570 | Oct 11, 2018 @ 05:07 PM | 2,866 Views


UMX Whipit update : 9.12pm




Wing tip has been glassed , should be well and truly cured / dry by now ..
Might be time to peg it .
Hopefully wont have to Frisbee it any more in the future .. Not planning to launch it hard enough to rip the wings apart ..

Hmmmmm !!!!
Saw a video on youtube , laminating film !
Got my self a roll ( came today ) , ordered the thinnest film I could find ( 0.04mm )
Did a test on some really soft flexi foam I have ( same foam I tested the fiberglass on ) ...
Impressive stuff .. Wonder if I should cover the Whipit's wings ? ( Looks like the top of the wing is getting surface stress fractures )



Free Flight Report

...Continue Reading
Posted by mlilasic | Oct 11, 2018 @ 03:05 PM | 9,555 Views
Review of Eachine E015 With Flight Boat Car 3-mode Altitude Hold Mode RC Drone Quadcopter RTF &DVR car mode footage

In really big box came newest toy from Eachine, its E015.
Oversized box is no problem because everything is really protected in transport.



E015 dvr car hovercraft mode (7 min 10 sec)



This is 3in1 toy:

1. Quad - it flies great!
Its suitable for beginners because it has height hold mode which works great. Check my maiden test flight video:



Eachine E015 indoor maiden test flight (6 min 4 sec)
...Continue Reading
Posted by Bill M - RC | Oct 11, 2018 @ 12:33 PM | 3,426 Views
Hi fellow rc pilots & rc enthusiasts

WLtoys V911S review & maiden flight. This WLtoys V911S 2.4G 4CH 6-Axis Gyro Flybarless RTF RC Helicopter review includes unboxing, overview, failsafe test & maiden flight. This is a great little rc heli for beginners and hope you enjoy watching this as much as I enjoyed flying this.

You can get this here: https://goo.gl/XbkfGk

WLtoys V911S RC Helicopter review & maiden flight (14 min 19 sec)

Posted by Absaroka | Oct 11, 2018 @ 12:00 PM | 9,720 Views
Got this 1700mm Cub on the way. Hope it's a good Flyer.
Posted by travisds | Oct 11, 2018 @ 11:40 AM | 1,633 Views
Here is my latest build,

Armattan Chameleon
Runcam Eagle with G lens
Aria 32 35A Esc
Matek F722 STD
Matek PDB with VTX
Rotor Riot Hypetrain Motors
Crossfire Nano Rx
Posted by scousethief | Oct 11, 2018 @ 08:08 AM | 20,878 Views
https://www.banggood.com/110-D90-90020-90021-90018-RC-Climbing-Car-Hard-Plastic-BODY-SHELL-For-HPI-p-1213610.html

The "upgrade" body for the Remo 1073 has arrived (link above) and so modifications can commence. The LED's should be here within the next few days and they will be (probably) the final upgrade to the aesthetics .
The next jobs all revolve around the drive train and handling, these mods will be extensive and with a little luck will bring something new into the hobby





...Continue Reading
Posted by Mannyman535 | Oct 11, 2018 @ 02:19 AM | 2,258 Views
I recently purchased this wonderful jet,
I will post here my progress and photos and flights,
this will be my biggest project to date, I have flown alot of edfs from foam to composite,
I have 1 turbine jet, tamjets F-16,
the super hornet will have a K-160 turbine,
my target date to have this project finished will be January or February of 2019
Posted by jasminshawn01 | Oct 11, 2018 @ 01:27 AM | 1,643 Views
These IOS apps are found to be sharing location data with third-party tracking firms:

ASKfm: Ask Anonymous Questions
C25K 5K Trainer
Classifieds 2.0 Marketplace
Code Scanner by ScanLife
Coupon Sherpa
GasBuddy
Homes.com
Mobiletag
Moco - Chat, Meet People
My Aurora Forecast
MyRadar NOAA Weather Radar
NOAA Weather Radar
PayByPhone Parking
Perfect365
Photobucket
QuakeFeed Earthquake Alerts
Roadtrippers
ScoutLook Hunting
SnipSnap Coupon App
Tapatalk
The Coupons App
Tunity
Weather Live - Local Forecast
YouMail: Voicemail Upgrade

Read more here: https://turtler.io/news/twenty-four-...-location-data