Posted by GroundControlRC | Jul 28, 2020 @ 07:23 AM | 9,827 Views

Volantex Sport Cub 500 RTF w/Gyro - DustOff Flights #4 & #5 - I love this Plane ;-)

Volantex Sport Cub 500

Banggood GCRC

Here is a link to the Video:

**I must have posted this out of order as My Favorite Trainer Planes Video has already been posted ;-)
I just have so much fun flying this Plane ;-)
It is one my favorite Micro Planes to fly and I just can't say enough good things about it.
This is one of those Planes where the amount of fun you'll have greatly outweighs the cost.

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Volantex Sport Cub 500

EXHobby / Volantex

Here is a link to the Playlist for the Volantex Sport cub 500:

Spare Parts: ***These Parts are for the Eachine Mini P51D Mustang but I believe they are compatible.

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane

Eachine 3.7V 380mah 25C Lipo **I use these in the Eachine Mini P51D Mustang with no problem

JJRC H31 RC Quadcopter Spare Parts Battery 3.7V...Continue Reading
Posted by Tazkiller85 | Jul 28, 2020 @ 04:53 AM | 10,529 Views
Yep Les Amis,
Monté, testé, approuvé ! Dans cette vidéo nous allons aborder plusieurs sujets, mais le principal sera sur le montage et le test des nouveaux produits BETAFPV. La nouvelle carte de vol F4 AIO 35A, le VTX M02, les moteurs 1805 ainsi que la frame du TWIG ET5. L'assemblage et le paramétrage s'est très bien passé, tout est très bien étudié et détaillé sur le site BETAFPV. Un bon ensemble, performant et fiable pour un montage de type TWIG. On testera en même temps la réception des X_FLIP Modular en quadiversity et bien d'autres choses encore ... Bon Film et merci à tous pour votre soutien .

BetaFPV TWIG ET5 - Montage Review Test Démo - Bonne impression et bonnes sensations ! (33 min 44 sec)

NOTATAZ : 17.5/20 C'est pas cadeau mais c'est performant et efficace !

- Frame TWIG ET5 :
- Moteurs 1805 2550KV :
- Carte de vol F4 AIO :
- VTX M02 :
- Caméra FPV White Snake :
- Protection plastique câbles moteur :
- 3ème main URUAV :
- Smoke Stopper VIFLY : (Drone FPV Racer) : / (Vifly) : / (Banggood) :

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) :

- Si Vous voulez...Continue Reading
Posted by DoubleEagle | Jul 28, 2020 @ 03:34 AM | 10,127 Views
Meet New Double E RC Rock Crawler D110 Second Edition!
Modeled after the Land Rover Defender
It has been over a year since Double E released the RC rock crawler D110 in a convenient, ready to run version including 2 cell battery. The detailed interior/ exterior with a 1:8 scale to the actual car has caught enthusiasts’ attention. The model comes in two versions and colors: a white pickup and a station wagon in orange and green color.
Read more:
Posted by jmxp69 | Jul 28, 2020 @ 12:23 AM | 9,506 Views
Expensive plane? Worried that BEC will fail? Did you charge that Rx pack?
Fault Tolerant and Reliable Redundant Power System for Radio Controlled Plane - CHEAP and EASY! (8 min 50 sec)

Posted by RCLCP Podcast | Jul 27, 2020 @ 10:16 PM | 10,454 Views
Welcome back! Today we dive into our latest projects and outings. What is going well, and what has gone terribly wrong...

You can reach us at:

Email: [email protected]

Face book: RC Lawn Chair Pilots

Twitter: @RclcpP

Instagram: @rclcp_podcast

Horizon Hobby RC Fest, OCTOBER 2 - 3 | ELI FIELD | MONTICELLO, IL

Coming August 9-13: the MultiGP Virtual Open

RealFlight and RCG Virtual Flyin

Soar Utah Event

St George Electric Festival

NEAT 2020

BEST 2020

SMALL 2020

FrSky Transmitters

ACCESS Receivers

PRODUCTS WE USE (affiliate links)







Audio Version:

You tube:
Episode 4: Ready, Set, FIX? (1 hr 3 min 0 sec)

Posted by cuavlindy | Jul 27, 2020 @ 08:46 PM | 9,149 Views
CUAV NEW X7 Pixhawk Open Source Flight Controller for PX4 ArduPilot FPV RC Drone Quadcopter Drop
*Faster than ever
*Adapt to harsh environment
*Built-in shock absorption design
*Always stable
*Simply update your V5+
Posted by navigator2011 | Jul 27, 2020 @ 08:19 PM | 9,507 Views
Hey guys, just a quick note to say that if you're tired of trying to fit the stock canopy on your Blade 150S, consider using a 180cfx canopy. The 180cfx canopy goes right on without any modifications needed. As an added benefit, the orange color is a lot easier to see against the treeline!

Blade 150S with a 180cfx canopy (0 min 42 sec)

After pulling the trigger on two brand new 180cfx canopies, I was very happy to discover that the orange canopies fit easily without requiring any modification to the canopy holes. So, from now on I'll be using orange 180cfx canopies and reserving the stock 150S canopies just for a backup.
Posted by jmxp69 | Jul 27, 2020 @ 06:17 PM | 7,544 Views
In this video I review all of the main setup options of the radio including demonstrations of what the options do. I cover usage of the LUA tools menu, managing the tools displayed on that menu, SD Card navigation, hardware calibration, and much more.

Radiomaster TX16s Radio Setup - Complete Start to Finish TX16s Setup OpenTx for Beginners Tutorial (24 min 10 sec)

Posted by xplaneguy | Jul 27, 2020 @ 02:12 PM | 9,980 Views
Over the last three months of this pandemic, I've been converting electric foam airframes to 1/2A glow power, and having so much fun!

Yes...Old School Rules!

Here's the current 1/2A / Glow powered fleet:

- GWS C-47 with Cox .049 Sure Start engines
- FMS Alpha Jet chuck glider converted to R/C and powered by a Cox .049 Sure Start engine
- GWS T-6 Texan with Cox .09 R/C engine
- FlyFly P-40 with Cox .020TD engine
- SD Models Condor with Cox .049 Medallion R/C engine.

Hope everyone is well!

All the best,
Posted by RC Roundtable | Jul 27, 2020 @ 01:04 PM | 9,707 Views
Episode 113: "Two Out Of Three Ain't Bad" is now live!

In this episode, Fitz and Terry talk about:
-Fitz's Freewing Mig-21 (5:10)
-Fitz's E-flite 1.5m P-51 (16:30)
-1/2A power boost (37:45)
-Terry's Ender update (43:30)
-13th Squadron (54:00)
-Schweizer 1-23 kit (56:35)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by bebel25a | Jul 27, 2020 @ 12:49 PM | 7,967 Views
Like new. Note the screen protector is still on the monitor screen.
Posted by old4570 | Jul 27, 2020 @ 06:01 AM | 7,699 Views
A little work here and there and things start to come together .

A) Laser cut parts are really well cut . Half the time the parts almost fall out of the sheet of balsa .
B) Looks to be well designed , things are going together relatively straight ( A bonus )

On the fuse I used mostly medium Cyno , on the wing I used both thin and medium . Want joins to dry / bond quickly ? Use thin . Where you want more gap filling , use medium . Thick cyno ? , I have some but have not felt the need to use it .

Hopefully on the morrow I will complete gluing the wing .
Then I can sand and cover the R03 .

Part 3
Posted by GEMFAN ts | Jul 27, 2020 @ 03:17 AM | 9,196 Views
We're so excited to announce our #loopgiveaway with Betafpv on Instagram! By completing the loop, you'll be entered for the chance to win a gift! Enter before 12 p.m. UTC on 31st July 2020, for a chance to win.
Three winners will be chosen randomly on 3rd August.
A shown in photo, winner will get one BETAFPV Xknigt 5 OR one Gemfan giftbag (including with 20 sets #newrelease Floppy Proppy 5135 and 10sets Hurricane SL 5125)
Check the rules for participating in this loop giveaway on Instagram:👇🏻
#loopgiveaways #betafpv #gemfan #xknight5 #floppyproppy #giveawayoninstagram
Posted by jmxp69 | Jul 27, 2020 @ 12:49 AM | 8,263 Views
This video tutorial shows how to upgrade firmware on the Radiomaster TX16s using OpenTx Companion. While the video is based specifically on the Radiomaster TX16s, the procedures and software will be the same for other OpenTx based radios:
Radiomaster TX16s How-to Upgrade TX16s Firmware - OpenTx Companion for Beginners Tutorial (15 min 34 sec)

Posted by Kmot | Jul 27, 2020 @ 12:43 AM | 10,174 Views
I got an engine made the same year I was born. I think that is pretty cool.
Posted by Garden Gnome | Jul 26, 2020 @ 10:34 PM | 8,055 Views
Hello Im very new to rc helicopters.i bought a T8SG PLUS v3 and a xk k110 .does anyone know the numbers I have to program into the transmitter for throttle curve,pitch,expo,d/r,swash so it can fly better.
Posted by jmxp69 | Jul 26, 2020 @ 08:35 PM | 8,310 Views
Here is the maiden flight of Dave's Factor 3D:
Great Planes Factor 3D Maiden Flight (10 min 9 sec)

Posted by lawrence4 | Jul 26, 2020 @ 07:56 PM | 8,137 Views
Mix throttle elevator to adjust Flight status (2 min 22 sec)

Fly wing add wing top power, when the thrust cause a head down force, need to adjust some elevator to eliminate the Down thrust, but it hard to do that precisely.
Mix throttle elevator setup will be easy to get a good solutions....Continue Reading