Here is yet another interesting entry into the micro brushless race quadcopter scene the
LANCHI Monster 76mm Micro ,looks promising
Specifications:
Brushless motor: 1104 8000KV ( only supports 2S LiPo )
Propeller: 1630 tri-blade ( red, yellow, transparent at random )
Battery: 7.4V 500mAh 20C LiPo ( built-in )
Weight: 53g ( excluding battery )
Carbon Fiber Frame
Wheelbase: 76mm
Material: 3K full carbon fiber
Main board thickness: 2mm
Lateral board thickness: 1.5mm
F4 Flight Controller
Processor: STM32F405RGT MCU
IMU: MPU6000 connected via SPI
Version: 6DOF ( no barometer nor electronic compass )
BEC output: 5V 1A
Integrated OSD: yes
Firmware: BetaFlight 3.1.0 OMNIBUSF4
Function: supports buzzer, voltage monitoring, LED ESC programming
Power supply: 2 - 4S LiPo
Compatible receiver: SBUS, PPM, DSMX receivers
Mounting hole: M2.5, 20mm spacing
Dimension: 27 x 27mm
Weight: 8.5g
4-in-1 ESC
Processor: EFM8BB21F16G
MOSFET: TPN2R703NL
Power supply: 2 - 4S LiPo / HV LiPo
BEC output: no
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 5 seconds )
AIO FPV Camera
Horizontal resolution: 700TVL
Input voltage: 5V
TV system: NTSC / PAL ( auto )
Field of view: 120 degree ( horizontal ), 100 degree ( vertical )
Impedance: 50 ohm
Video transmitter: 5.8G 48CH 25mW
Different Versions:
PNP: no receiver
BNF FrSky Receiver: 2.4GHz 8CH, 600m receive distance, PPM / SBUS signal output, 5V input voltage, compatible with DHT / DFT / DJT / XJT / X9D Plus / X9E transmitter
BNF FLYSKY Receiver: 2.4GHz 8CH, more than 400m receive distance, PPM / SBUS signal output, 3.3 - 5.0V input voltage, only compatible with AFHDS 2A transmitters
Find one here
http://www.gearbest.com/brushless-fp...?lkid=10925760