Posted by Felipe Garcia | Today @ 03:46 PM | 19 Views
RC swallow (BlueBird Silent Flight oct/nov1993)

Golondrina RC/ RC swallow (BlueBird Silent Flight oct/nov1993) (3 min 24 sec)

Posted by UpNup | Today @ 02:35 PM | 57 Views
Today my wife had the hard part while I flew the plane. While she was videotaping, a 4 year old came up to her:

Colton: Can I fly that plane?
Mary: Maybe when you're older.
Colton: I'm almost five. Maybe I could trade my RC cars for that airplane. Would you go ask him?
Mary: Well, my husband really likes airplanes. He spent a lot of time building them from little pieces of wood.
Colton: My Dad leaves the cars in a closet and doesn't charge them. They can go really fast! 186 miles an hour! ... How long is he going to keep flying (sigh).
Mary: Well, sometimes ten minutes. He's only been up for five minutes. You can ask him to show you how it works when he lands.
Colton: Will he land soon?

Actually I did land right about then and got to describe how the servos worked. He helped me count out all six rubber bands. He was captivated watching me remove the battery and power down my Tx. His grandmother who had hovered nearby promised to get him a rubber-band balsa stick plane. It's what I started on when I was about his age.

The influence we have is really powerful if we'll see engagements as an opportunity and not a nuisance, especially with a precocious kid like Colton. And it didn't hurt that the grandmother noticed my Jesus fish (Ichthus ) on the wing and read the Fellowship of Christian Modelers logo on my hat.
Posted by target | Yesterday @ 08:45 PM | 322 Views
I finally found a MPX Twist, through the kindness of a good online sloper friend. Thanks, you know who you are!

I have needed a 2M efficient light weight sloper for a while, because I have been flying frequently when conditions are such that only the old school EPP Weasel would stay up. A nice light but agile plane is what I needed, and the Twist should fill the bill, and it comes with, and breaks down into a coroplast travel case. SO AWESOME!
I hope to have an AUW of @ 20oz RTF.

Pics to follow.
Posted by target | Yesterday @ 08:40 PM | 335 Views
Yep, it happened. I built a 48" Moth!
What a different mentality building with EPP is.....

Pics to follow when I have time.

Posted by old4570 | Yesterday @ 08:19 PM | 333 Views
Nemesis No1 ( Navy K 628 Lock Back Knife ) (5 min 14 sec)

This Navy K-628 440c could not hold an edge , no mater how much I massaged the factory bevel .
I could get it shaving sharp , but the edge would vanish within 4 or 5 passes through cardboard ( it became a butter knife )
I seriously thought the knife had rubbish steel for a blade .

That was many , many years ago . The knife has been in a box , and labelled a basket case .
It was time to pull it out and put a known bevel on it ( 22deg @ 180 grit with a 400 grit clean up of the bur )

It has gone from basket case to performer with a change in the angle of the bevel . ( How many of my knives are afflicted with a bad factory bevel ? )

Nemesis No2 will be tested next .
Posted by billyknight2006 | Yesterday @ 08:12 PM | 328 Views
Looking for a Saito FG-60R3 or a Saito FG-90R3!! I know one of you all has one in the attic you not going to use and ready to sell! 😂😂😂🤦🏾‍♂️! HELP ME HELP YOU 😂😂🤑

Contact info
Shoot me a text and I will call you.
Posted by GBLynden | Yesterday @ 05:23 PM | 381 Views
This is a 3S 2200 Flight With The Durafly Goblin Racer 820mm RC Plane By Reckem Roys RC!

3S 2200 Flight With The Durafly Goblin Racer 820mm RC Plane By Reckem Roys RC (3 min 28 sec)

Posted by Jack Crossfire | Yesterday @ 05:17 PM | 391 Views
A new filter, maximum load test, & the nozzle actually worked. The blower didn't entirely fit in the nozzle, but going halfway seemed to be enough.

The outlet was left scotched on so if the air comes out too fast, the outlet diameter can be changed. A motorized outlet was deemed unnecessary & would have required upsizing the rest of the nozzle. A bayonet mount for the outlet would have been nice.

The only glitches were the IR getting obstructed by the cables & no protection from the nozzle hitting the wall. The air comes out faster than expected. The bearings & contortions didn't impede the airflow as much as expected, but that's why it's a fighter jet nozzle.
Posted by davekra | Yesterday @ 12:17 PM | 474 Views
Vector II wings
Posted by GroundControlRC | Yesterday @ 10:13 AM | 1,420 Views

Volantex Ranger G2 V757-6 1200mm Wingspan EPO Sport FPV Glider PNF - Fine Tuning Adjustments Session #1

Volantex Ranger G2 1200mm PNF

Volantex Ranger G2 1200mm Kit

Here is a link to the Video:

Tutorial - Volantex Ranger G2 - Fix that bad Thrust Angle

Turnigy 2200mAh 3S 25C Lipo Pack (This is the pack I'm flying)

GNB 11.1V 2200mAh 3S 110/220C Lipo Battery XT60 Plug (Not Tested but should work)

URUAV GRAPHENE 3S 11.1V 2200mAh 100C Lipo Battery XT60 Plug (Not Tested but should work)

2 Pieces 8040 Direct Drive Propeller - CW

Banggood GCRC

You Can Help Support Us By Using Our Affiliate Links To The Products Above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #VolantexV757 #VolantexRanger #VolantexRangerG2 #RangerG2 #Ranger

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups
Posted by Tazkiller85 | Yesterday @ 05:03 AM | 1,486 Views
Yep Les Amis,
Elle envoie GRÂÂÂÂVE !!! Reçue en 1 semaine de Banggood, j'ai en test aujourd'hui la Tronsmart T6 MAX. Une enceinte Bluetooth d'excellente qualité, que ce soit dans sa conception que par ses performances ! Grâce au système SoundPulse, elle restitue aussi bien les basses que les aigues et ça, du plus bas niveau jusqu'au maximum du volume. 60W de puissance sur 360°et 2tanche IPX5, cette enceinte est aussi à l'aise à la maison qu'en extérieur. En bref, j'ai trouvé ma nouvelle compagne de vol ! lol . Bon Film et merci à tous pour votre soutien .

Tronsmart T6 MAX enceinte bluetooth - Review Test Démo - 60Watts et 2Kg de bonheur ! (18 min 54 sec)

NOTATAZ : 18.5/20 ça envoie du pâté !!!
Les + : Bon son, Rendu des Bass, Connexion rapide, Menu tactile et lumineux, Puissante !
Les - : Pas de prise USB pour charger un smartphone .

- Enceinte Bluetooth Tronsmart T6 MAX 84€ ( Coupon BGESSUIJI ) Livré en 1 semaine en entrepôt CZ :
- Tronsmart Element T6 Plus 40W (Livré en 1 semaine en entrepôt UK) :
- Tronsmart Oreillettes Apollo Bold (Amazon) :
- Site Tronsmart :

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 (remis à jour régulièrement, pour aider la chaîne, gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) :

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les...Continue Reading
Posted by Amanda BH | Yesterday @ 04:06 AM | 1,494 Views
Brotherhobby new 2004LR 1650kv which design for long flight time.
Building with 2s 7in, it can fly more than 30mins
Posted by Jack Crossfire | Yesterday @ 02:48 AM | 1,564 Views
Cable guards installed, hall effect sensors rearranged, & cables farstened. Getting those cable guards to fit around the motor modules & attach to the tubes required some of the gnarliest CAD modeling. A revision would definitely involve screwing them onto the tubes instead of gluing them.

Wrapping the cable in captain tape & hot gluing the captain to the plastic proved to be the best way to farsten it. A 6mm diameter proved to be the narrowest PLA worm size before it crumbled.

The cable guards still aren't perfect. The laminations have to be smoothed. A heavier cable snags less than a skinny wire, so a bundle of captain where the cable meets the cable guard helps.
Posted by Ash12 | Sep 18, 2020 @ 11:23 PM | 1,582 Views
Has anyone ever tried to take turns off a stock brushed rs540 motor to make it go quicker? Just wondering what would happen 😂 I guess it would up the amps and speed? Anybody?
Posted by jmxp69 | Sep 18, 2020 @ 09:01 PM | 1,622 Views
Want to change out the pots on your Radiomaster TX16s?

How-to Upgrade Radiomaster TX16s Sliders (5 min 22 sec)

Posted by basslord1124 | Sep 18, 2020 @ 08:38 PM | 1,626 Views
Introducing a balsa model project to my youtube channel...a Vinh Quang DHC2 Beaver with a cool looking military color scheme.

Vinh Quang (VQ) DHC-2 Beaver project intro - balsa construction, .40/.46 size... (4 min 30 sec)

Posted by Marsmann11 | Sep 18, 2020 @ 05:57 PM | 1,641 Views
For sale - DJI Matrice 210 RTK plus Zenmuse Z30 Optical zoom camera for reduced price.
Plus 4 batteries, carrying case, and ground station case.
Posted by turbinefancy | Sep 18, 2020 @ 04:55 PM | 1,688 Views
We all have airframes that have not been flown a while. Maybe it’s outdated, under powered or just isn’t as flashy as the latest and greatest. But flying one from the cockpit perspective can make you giddy like kid again, even with the butterfly in the stomach feeling of learning to fly all over - with Head-tracking high definition FPV.

Cobra Jet FPV Aerobatics with Head Tracker (4 min 46 sec)