Shop our Airplanes Products Drone Products Sales
Posted by mike_kelly | Today @ 05:24 PM | 10 Views
A man of his word, OlliW has finished the modified Notify node firmware that supports the larger 1.3' OLED display. My old eyes are very happy

Posted by JohnCC | Today @ 03:12 PM | 34 Views
I'm excited. Mobula 7 HD newer batch of stock is preordered for upcoming review on my channel!

I got a coupon for you guys and it's a pretty good deal. Caddx Turtle V2 HD camera costs about $65 by itself and the regular Mobula7 costs about $90. You get the newer frame on the HD, canopy, motors, f4 flight controller, and juicy high definition whooping. Coupon code for Mobula 7 HD is ttxbg10 will make it $144.90 Just make sure to pick the correct receiver from the CN warehouse.

Full disclosure: it's an affiliate link; but this is an actual good deal if you're looking for Mobula 7 HD.
Posted by fafa20 | Today @ 01:21 PM | 57 Views
My shop accessories for DJI and tailor-made on demand
Posted by scousethief | Today @ 12:54 PM | 60 Views

Will be here in the next few days

Volantex 759-3 Phoenix 2400 2400mm Wingspan EPO RC Glider Airplane PNP

Brand Name: Volantex
Item number: 759-3 Phoenix 2400
Wingspan: 2400mm
Overall Length:1132mm
Flying Weight: 1160g
Prop Size: 1060 Folding Prop
Motor Size: 4023 1050KV Brushless
Speed Control: 40A brushless ESC
Servo: 9gram Servo * 6pcs
Minimum Age Recommendation:14 years
Experience Level:Beginner
Recommended Environment:Outdoor
Assembly Time:Less than 1 Hour
Is Assembly Required:Yes

* Click & plug Easy Wing Mounting.
* Durable Plastic Fuselage.
* Professional Level Glider.
* Sporty flying performance.

Requires parts (Not included):
Recommended Battery: 11.1V 2200mAh 25C Li-po Click here
Charger: 3S LiPo balancing charger, 0.5A Click here
Radio: 2.4Ghz 6-Channels Click here

Package Included:
1x Volantex 759-3 Phoenix 2400 2400mm Wingspan EPO RC Glider Airplane PNP

...Continue Reading
Posted by DutchRC | Today @ 10:01 AM | 99 Views
Halloa guys

so yes.. aparantly Diatone has been in this RC multirotors game for 7 years by now :O They must have then be in it from kinda the start?
Congrats on lasting this long offcourse Diatone! And see here.. A 7-year anniversery edition FPV racer It definately looks special I'd say

Link to the quad: Diatone GTR549 / GTR569 anniversery edition
And offcourse there are all kinds of errors on BG's page :P

To start things of.. a detailed overview:

Diatone's 7th Anniversary GTR549 / GTR569 Mk3 Racing Quad - Show & Tell (20 min 55 sec)

type: racing quad - Streched X
wheelbase: 230 mm
frame base: 5mm
flight controller: Mamba F405 16MB flash
ESC: Mamba F40 4-in-1 40A Dshot600
motors: MB2207 2650KV or 1750KV
props: Gemfan Flash 5149x3
camera: Foxeer Predator v3
VTX: TBS Unify 5V - 800mW max
lipo: 4S or 6S depending on version
receiver: none, comes with FrSky R-XSR plug
OSD: yes
smart Audio: yes
buzzer: yes
LED's: nope
spare props: nope
Posted by Spaaro | Today @ 08:48 AM | 121 Views
Made a lot of progress on the weekend, as well as made time to connect with members of the Torrey Pines Gulls Club at their 'Fun-Fly'; much thanks to Mark B, Greg & Chuck for their hospitality & advice. It was a truly great day for all kinds of flying.

The Stab':
- Leading edge sheeting attached; I could have done better/'more thoughtful' approach with it, but worked out okay.
-Sanded, shaped and re-sanded = got the thinness & contours desired.
-Lost my scroll bit, so worked 2x as hard using other grinding heads & cut-off wheels to sculpt 'scallops'.
-Found a few other places to make lightening holes and began cutting away the unneeded, heavy, plastic 'under' template.
-Used food tray foam to make in-fill of all the open area beyond the leading edge sheeting.

More finish sanding/blending(..this bamboo plank sheeting is getting mighty thin!..) to get that seamless transition to the foam skinning and I've started selecting parts for the elevator hinging & foam skins....Continue Reading
Posted by AGFrc Nicole | Today @ 05:08 AM | 159 Views
Today we want to share a Sub-Micro Servo for you, which is 5-Star feedback from buyers


Operating Voltage: 4.8-6.0 V
Operating speed: 0.15ec/60 @ 4.8V
Operating speed: 0.13sec/60 @ 6.0V
Stall Torque: 3.0 kg-cm (41.66 oz-in) @ 4.8V
Stall Torque: 3.8 kg-cm (52.77 oz-in) @ 6.0V
Motor type: DC
Gear type: Titanium
Size: 22.8*12*29.4mm (0.89 x 0.47 x 1.15 in)
Weight: 15g
Connector Wire: JR 180 mm
Posted by cuavlindy | Today @ 03:46 AM | 171 Views
hi dear friend

how are you ? long time no see! hope you everthing goes well !

Aliexpress Anniversary sale coming, big discount up to 40% off , 2 days left now ,

come and check it in our shop:

if you need whole sale price , just feel free to contact us !

We are CUAV manufacturer,and our company have researched & designed Pixhack V3, GPS, hacklink , 3DR data link , wify link ,
some new product C-RTK ,4G LTE, and Pixhack V5 Autopilot and so on.

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
E-mail :[email protected]
Posted by CRCJA | Today @ 12:28 AM | 234 Views
Here is another Jet that I love, I used to have a foam electric version but a set of batteries died while in flight and it did not make it back to the field. This is a replica of an Italian Jet from their air display aerobatic team. The Frecce Tricolori (; literally "Tricolour Arrows"), officially known as the 313 Gruppo Addestramento Acrobatico, based at Rivolto Air Force Base.

I have heard that the build time is about four hours, since everything is installed at the factory. The list includes. All servos, servo wires, retracts, struts, wheels, brakes, Turbine pipe, gas tanks, snake tank, UAT and lights. The only thing needed will be: 1. Batteries for receiver and radio. 2. Receiver of your choice 3. Turbine of your choice. This will be outfitted with the new ACEx 80 Turbine from Global Jet Club. So both the MB-339 and ACEx Turbines are available at

The jet arrives in a wood crate, and is packed perfectly in there. It did take me a good 30 minutes to get everything out and get ready to ditch the box it comes in.

I just received via text the pictures of my new engine that is now ready to ship....Continue Reading
Posted by CRCJA | Today @ 12:00 AM | 221 Views
Well, Since I have I enjoyed my regular sized Xcalibur so much, that now I got it's bigger bother, the Xcalibur plus. Now this really can't be called a build thread since all you have to do is mount the equipment into the Jet. This will have the simplicity of Electron Retracts, struts, wheels and electric brakes. and a new CMJets tank with built in UAT is being designed for me as we speak and should be ready soon. Available from or
Posted by circuitfxr | Yesterday @ 11:04 PM | 222 Views
Hi everybody! Its been almost a year since I updated this thing. SHEESH!~

A lot has been happening around the house. As most of you know, my brother and I are currently into
R/C sailing yachts. (primarily Solings)

We needed some year round front yard decorations and decided to use a nautical theme.

One of my previous blogs showed you an "Alien" themed front yard display. This was made from grocery store containers and did NOT hold up too well in the BLISTERING HOT summer temps here in Florida.

During a visit to a local curio shop, we found some unpainted concrete statues. We purchased a mermaid, turtle, and rabbit.
After giving them a custom paint job, they got a healthy coating of UV resistant sealer and out they went to the front garden.
We drew, cut and stained a Gallien ship, under full sail, and mounted it to the wall of the house.

We attached a custom cut and stained dolphin to hang below it. The dolphin was given the house numbers.

Once I got the woodworking bug biting me, (LOL) I designed and built a sail box for our Soling sails. This has greatly reduced the loading and unloading time for trips to the lake. Transporting the hulls in their stands is alot safer and easier too.

Please enjoy the photos. More updates to come.

Thanks....Team Alienaters R/C...Continue Reading
Posted by Wingmanrc93 | Yesterday @ 09:39 PM | 235 Views
Good batteries guys.
Sorry crappy video..
Hope this works

Flying around the Blade 200srx - 11.1v 800mah 25c Floureon (1 min 55 sec)

Posted by DonAutogiro | Yesterday @ 08:43 PM | 246 Views
Scratchbuild CAD designed, builded in balsa, Thermoformed details
Wingspan: 1425mm
Flying Weight: 1300g
5 x 9g Servo
Gear retracts
Motor; Prop Drive 28-30S 800KV x2
2200mAh 3s Lipoly Battery
30A ESC w/BEC Turnigy x2

My friend Jorge, I wanted to build a Pucara with the electronics of a quadricopter unarmed. We decided to build two planes and design them together. Let's see how this adventure ends....Continue Reading
Posted by bill_delong | Yesterday @ 07:27 PM | 361 Views
This will be an evolving thread as I build and review a PR Racing SB401-TypeR. Look for regular updates to this post as I plan to race this buggy in the 13.5T 4WD Buggy class at Thornhill Racing Circuit (Turf Track). Full disclosure, I recently picked up a sponsorship through PR Racing so be prepared to expect some bias, but I will do my best to identify potential areas to consider making upgrades to improve the quality of this kit where applicable.

A quick background on me: I started club racing around 2010 and have slowly improved my skills to where I'm one of the slowest of the fast guys at the club in my area, ha! I typically average between 96% -98% consistency and will occasionally pick up a win for club racing and often make the A Main for regional events in 13.5 stock. My first wheeler was an InTech ER-14 (clay), then I switched to a Schumacher CAT-K2 (clay+turf) and spent the last 16+ months running a TEKNO EB410 mostly on turf. Expect to see me try different things, I'm sure some ideas will fail, but that's where I always try to learn from my mistakes and I welcome you to share these experiences with me here on this thread.

Hits: TBD

Misses: TBD

Summary: TBD

Build Tips: TBD

Check out more stuff on My Bookmarks page!
Posted by Bill M - RC | Yesterday @ 05:47 PM | 287 Views
Hi fellow pilots & rc enthusiasts

Here is a limited time discount coupon for this great NEW Geprc GEP-CX Cygnet 115mm 2 Inch RC FPV Racing Drone Stable F4 20A 48CH RunCam Split Mini 2 1080P HD - Frsky XM+ Receiver

10% OFF coupon: cygnet
expiry date: 2019-03-31

Get this here now: