stevster's blog View Details
Posted by stevster | Sep 28, 2019 @ 09:20 AM | 1,686 Views
I just recently purchased a Balsa USA Der Jager biplane off of Craigslist. I don't usually buy built airplanes because of my love of building myself, but at $300.00, a great build, a plane I always really liked, with a OS Max 300 twin in it.......I had to buy it! It had been sitting in this guy's garage for around 10 years and who knows how long before that (some guy gave it to him before that). I really just bought this for the engine, but the build was so good on it, it needed to hit the skies again! I removed over 2 pounds of baggage: 2 sub C 5 cell receiver packs, 2 separate switches, 1 sub C 4 cell glow driver pack....all 3 @ 2 lbs, some lead wrapped around the motor mount @ 6 ozs. & the 2 Dubro 5" air tires @1 lb! Between the new modern batteries & tires, I put back only 15 ozs. of weight. A savings of around 2 1/2 lbs! Total airframe ready to fly weighs in at only 23 lbs.

Just maidened it this week and what a great flyer. after a slight CG adjustment it flies on rails! That OS 300 twin really halls the mail & the sound is unbeatable in the air & on the ground. No ring ding, weedwacker flying by, sound for me. It's worth every penny I spend on glow fuel for the experience, and wiping it off after each flight........really isn't that hard! Oh yeah..........the nitro smell....................
Posted by stevster | Jan 06, 2019 @ 10:02 PM | 4,714 Views
I just ran across this picture going through my Mom's stuff. I guess I was destined to be a model airplane guy as a child. Looks to be around 1964 which would make me around 12. I believe that's a Carl Goldberg Lil' Satan I'm puttin' together! Dope at the ready on my desk. I can smell it now!
Posted by stevster | Sep 04, 2018 @ 01:01 PM | 5,068 Views
Here's my "just finished" 1/4 scale, Stits Skybaby Biplane

26" Wing span!!! Built from a Mansell Models short kit. It was designed for electric (which is much more practical) but me being a "gas only" guy, it is powered by a massive, OS Max .32 two stroke!

The weight limit on the plans was 44 oz, and mine weighs in at 56 oz (with no fuel)! so it isn't looking too good for a flyer, but I didn't really build it to fly anyway, as I covered it in fabric (like the full size) and with all of the painting and such.......it's a little "Porky Pig"

Thanks to Callie Graphics for the artwork. They helped finish it off! It looks great hanging in my garage!...Continue Reading
Posted by stevster | Jun 17, 2018 @ 11:04 AM | 6,233 Views
Just finished my 1/4 scale, 1933 Pietenpol Aircamper. It started as a vintage, House of Balsa "in the bones" project that I got from my good friend Billy. I saw a lot of potential in it, so I decided to take on the challenge of finishing it. I covered it in Ceconite, pinked & stitched it all (with Poly Brush), and filled the weave with water based Polyurethane. I then finished it all off with Rustoleum rattle cans. I've got a OS Max .91 four stroke hiding under that balsa 4 banger! The air for cooling flows through the "fake" oil cooler mounted on the front of the "engine" & out through the empty rear of it. Here's some pics:

In case you were wondering where I came up with those cool little "spark plugs"...........there just wood dowels, turned down on my lathe, painted white, striped, laying a brush down against the white while turning in my lathe, all in with a drilled out lock nut, finished off with a miniature brass stud & nut. Pretty convincing, huh? Building the "woody" 4 banger was actually more fun than the plane!...Continue Reading
Posted by stevster | Feb 07, 2015 @ 12:22 AM | 18,242 Views
I've always been a car lover, and have had many pass through my hands. I've also restored a few for other people. Here's a few.........
Posted by stevster | Feb 07, 2015 @ 12:15 AM | 18,292 Views
I've always been a car lover, and have had many pass through my hands. I've also restored a few for other people. Here's a few............Continue Reading
Posted by stevster | Feb 07, 2015 @ 12:11 AM | 17,970 Views
I've always been a car lover, and have had many pass through my hands. I've also restored a few for other people. Here's a few............Continue Reading