brandonmoon's blog View Details
Posted by brandonmoon | May 13, 2017 @ 02:41 PM | 43,443 Views
I have been soooooo looking forward to reviewing this plane. This plane has been a little over 3 1/2 years in the making.This will be my Review of it posted here and on the earlier discussion topic thread posted here:

Here are some earlier pre-release photos released by FMS. I am still waiting for the plane to arrive which should be here soon

The one I will be doing is the Silver "La Patrona" livery with a second set of wings modified to have a working folding outboard wing panels.
Posted by brandonmoon | May 07, 2017 @ 05:03 PM | 39,654 Views
Looking to rework several of my old hangar queens these days and convert them over to electric and give them a new face lift. This is one of them from Too Long ago that I still have and used to be set up on a pair of O.S. .51 FSR's....Soon now to be converted to electric and completely stripped and refinished. She's looking a little shabby these days after being stripped of her motors and radio gear about 23 years ago. This was actually done while I was in the Air Force at Biloxi MS attending "A" school for Avionics just prior to Desert Storm as a tribute to my Dad who used to be a Radio operator on them in the Air Force Reserves at Luke AFB in AZ.

During her day she flew great. She was a handful to fly and very touchy on the elevator, but that was expected, since she is short coupled. I got about 6 flights on here, before I got busy with Desert Storm and distracted on to other projects....Time to revisit the old girl

The fuselage is all fiberglass and the wings are balsa sheeted foam cores. The floats are solid balsa on balsa & plywood reinforced pylons. The cowls and nacelle's are ABS plastic along with the turtle back in the wing top center....these will more than likely be scrapped and replaced with fiberglass components.

This is the second of two of these I made with the first one having scale operational retracts via a spring air retract setup. I still have it today and would love to incorporate in to this bird for land operation...The only...Continue Reading
Posted by brandonmoon | Apr 30, 2017 @ 07:39 PM | 40,734 Views
This is what I've got done on mine so far and the few changes I've made

I also changes the size of the main wheels by using the foam tire from a larger wheel and stretching it up on the original wheel hub. The Nose gear mod, tire, and strut is from the FMS 1400 T-28 Trojan.

PCB's are from the new FL F7F Tigercat.

I also have the radio programed for independent throttle control, by separating one of the throttle leads and placing it in Aux4 and programming in two special mixes to the rudder I can vary the RPM of each motor on the throttle stick by using it with rudder..... P-Factor turning I can also set them back to normal synced function at the flick of a toggle switch
Duke B60 and DX9 radio programed for independent throttle control (4 min 43 sec)

I will be using two admiral 4000's. Though I do also have it set up to run a single battery, will just require a bigger and heavier single battery. As it it now, I have 3 1/2 oz of lead in the nose with the two Admiral 4000's in order to balance.

I also CF strip reinforced the nose section of the fuselage.

And yes, I do have a full set of lights in the passenger compartment and cockpit that light up the entire interior. I haven't completed all the exterior Nav lights install yet and will be doing more on that later. Still have a few thing to do to it yet cosmetically.

As for right no I am using both the internal BEC's from the ESC's for RX power....same as the FL Tigercat, using the same ESC'...Continue Reading
Posted by brandonmoon | Apr 17, 2017 @ 11:47 PM | 41,122 Views
Here is my latest project. A modification/Bash of the FlightLineRC 1600mm F7F-3 Tigercat to add working folding wings and an arsenal of different ordnance choices and load outs. Plus a dedication to our Female pilots and enthusiast in the hobby and aviation community.

FlightlineRC 1600mm F7F-3N Tigercat folding wing mod #3 (After tweaks) (3 min 3 sec)

Brandon's Modified FlightlineRC 1600mm F7F-3 Tigercat with Folding (2 min 28 sec)
...Continue Reading
Posted by brandonmoon | Mar 05, 2017 @ 11:12 PM | 40,964 Views
I have wanted one of these planes for a long time, being the twin war bird fan I am , I will be setting this up for all electric operation on both Power setup and retracts. At the moment I'm undecided on which size and brand electric motors to use? it currently has a pair of exceed RC Monster Power 50-65 400KV motors on it with 60A Hobbywing esc's along with the stock ASM pneumatic retracts.

ASM P-61 Black Widow

Needs a little work and TLC, but will be completely different and detailed out when I'm done with it
Posted by brandonmoon | Feb 02, 2017 @ 12:19 AM | 42,673 Views
I have had mine now for a while and made a several test flights. I handles very similar to the earlier 1700mm P47 but in a slightly smaller size and definitely with more power and much better efficiency with much longer flight times on the same used 6s lipo batteries.

FMS has been listening to many of the modelers post's here and the desires they would like to see in new planes. Looks like they have incorporated many in this new 1500mm P-47D "Razor Back"... First let me give a special thank you to the FMS Company for giving me the opportunity to look at and review this model.

I am very impressed with with the new foam used which is very light in weight and the finish is well done and smoother than most I have seen in the past. The internal plug in wing connection concept is very convenient and provides for quick assembly and disassembly at the field. The use of the battery tray is very nice, but could be a bit wider to accommodate most available 6s lipos without getting hung up on the locking tabs it slides in to.

The level of scale fidelity is exquisite and is among some of the best I've seen. The detailing of the cockpit is fantastic and adds to the already nice scale appearance of the plane, though it could use a differently designed pilot figure for better appearance for fighter pilots of the era. The retracts and all aluminum compression struts are robust and hold up well, though I had to add an underlapping piece of plastic to...Continue Reading
Posted by brandonmoon | Dec 08, 2016 @ 08:46 PM | 43,444 Views
Review of the "FlightLineRC" F7F-3 Tiger Cat "Top Secret" project "Lelu"
Initial unboxing review:

I received the mysterious box from FlightLineRC and MotionRC and upon initial inspection was pleasantly surprised to find a gorgeous 1600mm twin all electric R/C PNP F7F-3 Tiger Cat. Time to do the happy dance and boogie down . I too have been fortunate enough to have been selected to test and fly a production version F7F-3 for the past month now.

My first inspections were of the foam finish and panel lines; I was pleasantly surprised to find it smooth and beautifully painted in dark sea blue. The texture and finish rivaled my recent purchase of a Durafly British Mk 5 spitfire and P-40N which at the time, was the best foam finish’s I’ve ever seen on a foam RC Model. Can’t say that now after seeing this F7F-3 Tiger Cat from "FlightLineRC". The finish is hands down second to none. I own several of their recent models and this one sets the bar yet higher again than their already high standards, I am thoroughly impressed!!!

After several days of ogling over the pieces, inspecting the electronics, and components of the airplane...I have noticed several nice new features. All the control surfaces are hidden hinged and countersunk (with exception of the elevators) for a scale like look and operation. They’ve included navigation lights and a sequenced landing light that operates on /off with the gear retraction, all very visible during...Continue Reading
Posted by brandonmoon | Jan 01, 2016 @ 09:27 PM | 46,191 Views
Here is what I've done with my new FMS 1400mm P-40B. FMS really out did their self on this and I am extremely impressed with over the older version which I used to have. ...Continue Reading
Posted by brandonmoon | Dec 14, 2015 @ 03:25 PM | 44,455 Views
I just got this a moment ago from RC flight deck. Just thought I would pass it along to all my RC friends to FYI. I'll be posting this on my blog page as well

Mandatory registration begins December 21st.

The FAA has announced a registration process for hobbyists who fly RC aircraft. I STRONGLY suggest that EVERYBODY read the FAQ page they have (link at the end) and demonstrate that we modelers are responsible pilots by registering as soon as possible after the website opens on December 21, 2015.

Here are relevant highlights:

1. Registration is free for the first 30 days. You pay 5 bucks online via credit card and they refund it.

2. You only register YOURSELF, get a number and put it somewhere on each of your aircraft.


A. You will receive a unique registration number that applies to any and all UAS that you own. You must mark all of your UAS with the unique registration number before operating. A registration certificate that contains the unique FAA registration number, the issue and expiration dates, and the name of the certificate holder will be sent to your email address immediately.

B. You will receive a unique registration number, not an N-number, and you must mark the registration number on your UAS by some means that is legible...Continue Reading
Posted by brandonmoon | Nov 05, 2015 @ 01:37 PM | 44,724 Views
Here is a link to the FAA that is good for us RC enthusiast to be aware of.!documen...2015-4378-0022
Posted by brandonmoon | Sep 17, 2015 @ 01:49 PM | 45,786 Views
I did this a few years back, but I had had repeated and numerous request for pictures on the mod. Since they are scattered through out a couple of different threads. I decided centralize the info and build pictures here as well here on what I did. Reading
Posted by brandonmoon | Jul 31, 2015 @ 03:01 PM | 46,114 Views
Here are a few pictures of the latest addition. A droppable water working "Torpedo" Still doing some refinements since the last one exploded and caught fire and melted in the water.

This is my second one of these. The first one exploded and caught fire last weekend when the Lipo got wet the second time I took the plane out to test it. the first time was a complete success and worked perfectly. Too Perfectly in fact and took off across the lake ....forcing me to take a swim after it.

It consist of three of the grey FMS Zero Drop tanks glued together and hollowed out in select sections that house a small 1S 150mAh lipo powering a small electric motor, dowsed in corrosion X. The (+,-) end of the circuit are left slightly exposed at the nose tip of the TORPEDO to cause a circuit short, and closes the circuit to engage the motor when it makes contact with water after it's dropped.

I'm also doing this same thing for my Free Wing SBD5 on the center line drop

In short...I tried to make it as simple and easy as possible. it's really not hard or sophisticated. Simple small motor, wire, battery (many to choose from)...I used a leftover 1S lipo...but I may change it to AAA or AA instead? later.... Less volatile
Posted by brandonmoon | Jun 29, 2015 @ 01:51 AM | 47,259 Views
Took my old Airfield Stuka which was crashed into many pieces a while back due to a pilot dumb thumb and decided to give her a new make over. Did her in an Afrika Desert Corp. livery

Bought me a new one from Motion RC, made me a second canopy hatch cover as an option to fly with with the cockpit open. I will leave this one the original two tone green camo least for now?

Both have Mr RC sound system with 2 speakers installed. The old one has the older SPL speakers. Then new FMS Stuka has the new TT-25 speakers.

Both have working lights in the Tank buster cannon barrels, the entire cannon assembly pod can be unplugged from underneath the wing and changed out from one stuka to the next.

Both have a working bomb drop on the center line, though they'er each a different type. The new green Stuka has been modified to use the new release mechanism and bomb from the new Hobby Zone Zero

The One I just did in the desert livery is the old Airfield Stuka. There are some minor differences I noticed between the Airfield and the FMS pilot choice (Airfield is better), push rods (FMS are beefier and better), and ESC choice ( the old Airfield cane with a 65A where as the FMS only came with a 60A)...other than that....most the rest is the same.

I'll post more pictures here later of both Stuka's as work progresses. For now....this is just the repaint of the old Air Field Stuka....Continue Reading
Posted by brandonmoon | May 30, 2015 @ 02:14 PM | 46,276 Views
Have never been real happy with the pilot figure for this plane and Japanese pilot figures in this size are impossible to find or not even available...So I took a stab at making one of my own from an old FMS pilot I had lying around. Here is what I came up with on just a quick whim. Even repainting to stock one doesn't quiet do it for me.

Used the end of a Q-tip and metal tape that I could bend and shape for the fur lining look and foam tac to stick it all on. Plus a quick re-paint to make it look a little better and more accurate for the era and type of pilot. Didn't come out to bad for a quick mod if I say so myself

Here are also some pictures from my older Airfield Zero and what I did to that pilot ( the bottom pictures with the pilot and Kamakisi bandana)...Continue Reading
Posted by brandonmoon | Apr 24, 2014 @ 11:14 AM | 47,627 Views
For all my friends and colleagues here on RCG.... I want to let everyone know as of April 2014, I have moved back to Arizona in the Mesa & Gilbert area.

Moved back and quit my job with Lockheed Martin in GA for family and health reasons. Also just simply didn't like living there any more .

Will be looking for new employment here in AZ as well as planning on going back to school and peruse my dreams & goals toward engineering. Any leads or help to that end would be greatly appreciated

Happy to be in my element and back in the open warm desert country

I'll be back up and active before you can say ...yippee- cye- yay!!!!
Posted by brandonmoon | Dec 08, 2013 @ 11:05 PM | 49,878 Views
This Has been my Baby & "Pride and Joy" for Years....Really!!! reluctant to be selling this one but time to be moving on to other new projects.

This is actually a true scale replica of an original V35B Bonanza located at Falcon Field in my home town of Mesa, AZ.

This is one smooth and graceful flying Air Plane and I've enjoyed many hours with her in the air. I flew hew with several motors, but the best was the Saito 150

I'm now moving all of the those parts over to my new Project the TF T-34 Mentor

I do hope some day Top-Flite re-release this Kit some Day. I would love to build this one again some day.

My Only regret is that I never got any video of me flying this plane, but that was long before I got into or had the ability and equipment to video the flights.
That will Not be the case with the TF T-34 Mentor I do Next

Posted in the RCG classifieds: Reading