Comments (2)
Add Comment
-
Views: 491
Gen 3 Sky Surfer fuselage mods -
Views: 530
Gen 3 Sky Surfer parts placement. You are better off mounting the VTX antenna on a wing if you can stand the drag imbalance. -
Views: 469
Gen 2 and 3 -
Views: 467
Gen 3 with 2.4GHz video and 600tvl sony OSD board cam -
Views: 492
Gen 2 with 1280 video and 480 OSD cased cam -
Views: 343
One peice fibertape across wing. -
Views: 370
Support for motor and wing. -
Views: 379
More tape to keep the fuse from tearing above the wing.
-
Views: 473
Hawksky with Turnigy 2200kv inrunner, 30amp volcano ESC, Dragonlink 9ch RX, Sunsky 1.2GHz 800mw VTX, homemade V antenna and 520 TVL sony 1/3". Camera only has pan ATM. -
Views: 317
Mentor made from kit but using all Multiplex recommended stock servo/motor kits. Pandora pan and tilt, Dragonlink 9ch RX, Readymade RC 300mw VTX,homemade V antenna, Readymade RC 520TVL Sony 1/3" and ET OSD Pro. -
Views: 332
My stock ST Models Fox with 7ch Futaba DC 72MHz RX(DL 9CH on order). I plan on setting it up for FPV, not too sure how it will be with the weight though. Kyosho Minium clipped wing Cub sitting on the Fox wing. The cub is a fun little plane when it's dead -
Views: 250
Yellow/blue and black Slash is a 2wd used for bashing and jumping on pavement, it's pretty good on dirt too. The black Slash behind it is a 4wd converted to a 2200KV Mamba Monster kit. It's fast and well balanced with 6000mah 3s in it and really clears ju -
Views: 260
Hoods up shot. -
Views: 276
Pic of 4x4 right after conversion, disregard the read springs, went back to lighter springs soon as i drove it. -
Views: 187
Starmax Piper J-3 Cub 55" WS