Posted by alex_nikiforov | Dec 12, 2019 @ 11:12 PM | 7,113 Views
Foxeer Razer Mini / Micro 1/3 CMOS 2.1mm / 1.8mm Lens 1200TVL 4:3/16:9 NTSC/PAL Switchable FPV Camera For RC Drone
Foxeer Razer Mini / Micro. Бюджетная камера всего за $16. (10 min 2 sec)

Razer Mini
Razer Micro
Posted by CarlosSM | Dec 12, 2019 @ 09:37 PM | 5,654 Views
Hi Guys,
I have been flying RC for a long time, lately I got really into free flight and I'm new and willing to learn. Where can I buy the system to wind the rubber band outside the plane? I'm flying old timers 30-40" WS Thanks for the advise.
Posted by Reckless_fpv | Dec 12, 2019 @ 06:15 PM | 5,660 Views
Just want to say thanks everyone for all the support! 🔥 🔥 Its been so much fun growing with everyone! 🍻 🍻 My channel has blown up this year! I wouldnt be able to fo any of this with out all your support, eventually the goal is to make a living doing this! I know its a long shot but last year so was getting to 1000 subs but here we are! 🔥 🔥 Thanks again everyone! If you wanna go the extra mile heres the link to my patreon :
And if you would rather just get a shirt hoodie or stickers heres my teespring
I plan on making fitted hats, backpacks and fancy prop bags soon! 🔥 🔥
Posted by GBLynden | Dec 12, 2019 @ 06:05 PM | 4,319 Views
Here is my weekly RC stream from last night featuring the sexy E-flite Su-30 Twin 70mm EDF Jet!

Hump Day RC With GBLynden - I Am Alive, E-flite Su-30 Twin 70mm EDF Jet, & More! (2 hr 10 min 45 sec)

Note: I show the plane at around the 52 minute mark and go into detail with up close shots of this beautiful plane!
Posted by old4570 | Dec 12, 2019 @ 05:27 PM | 3,207 Views
Black Friday

Almost 20 items in the limbo called MAIL !
Where's my stuff !!!!

Purchased my Christmas ( Xmas to some ) presents to myself ( who better to chose something to buy ) ..
Yes , was not after shirts or socks or any other nick naks ! No it had to be RC related ...
Folks at Banggood had a recent sale and a certain 4ch Cub was on sale and I got it for the same $$ as a WL toys F959
One can only hope it gets here for Dec 24 ( Last day for some snail mail ) .

A BIG THANK YOU to anyone and everyone that used my Affiliate links to buy stuff , earning me some BG points .
When you buy a lot of stuff ( I cant help it ) , every point helps .

Hmmm , Black Friday !

Do I window shop or blow some dust off my wallet ? ( Wait ) Didn'y I just spend money ? I'm a bad boy !
I have a Bee 490 staring at me

Still Ho humming over it's stuffing ..
I just might have to do a F959 flight pack onto it ( Control board / motor / folding prop )
Also that 450x with the F949 control board , needs work - Roll rate is way soft . Control horns might need new holes ..
Posted by GroundControlRC | Dec 12, 2019 @ 05:19 PM | 2,788 Views
The GFS F-22 Nano Airframe is nearly complete ;-)
It's starting to look like a Parkjet.
The estimated weight of the Airframe is 6.8 grams.
The estimated AUW is 27 grams!
I have a motor and prop combination that provide 37.2 grams of thrust on a 1S LIPO ;-)

Time to get back to work....

See you in the Air!

Ground Control RC
Posted by spinnaker225 | Dec 12, 2019 @ 11:34 AM | 3,504 Views
The line drawings have been digitized and reviewed. I decided to stick closer to the true FP's 1935 "A" design as the drawings for Topaz are not available. I compared the basic dimensions of each and realized that when they re-designed Frank Paine's J, the Architects changed the overall length and the water line. Topaz is actually longer then the original. Since I have Francois's books with drawings of all the J's, I decided to stick closer to what was originally drawn.
I entered the drawings into Auto-Cad where I calculated the CLP (center of lateral Plane) in order to design a balanced set of sails using the relationship between the CE (center of effort)of the sails.
According to some design theories, there the CE should be forward of the CLP by approx. 15% of the DWL (designed water line. It will be interesting to see if I notice any positive effects. I have 3 other J's to compare performance to but seeing that they are all shorter, it will be an educational exercise at best, at least for now.
When Rick Shousha finishes the bulkheads, I'll start my build blog.Just what I need.....a 4th J. Anyone want a good deal on a Rainbow or Endeavour?
Rick has made good progress on the bulkheads. Close to being sent to the laser cutter.
I'm continuing to call this project FP 1935 "A" because drawings of Topaz were/are unavailable. Although they are supposed to follow the original line drawings closely, I don't know what tweeks or allowances they made so,...Continue Reading
Posted by basslord1124 | Dec 12, 2019 @ 10:34 AM | 3,786 Views
Here's an easy cool little mod I did to make a battery hatch on my FT Spitfire...

FT Spitfire mod: removable battery hatch (3 min 41 sec)

Posted by jmxp69 | Dec 12, 2019 @ 10:27 AM | 2,721 Views
I'm not done testing, but as far as ZTW vs Generic ESCs, this test showed me enough to switch out my generics for ZTW.

This Might be the Best ESC (13 min 47 sec)

Posted by drewdb | Dec 12, 2019 @ 09:18 AM | 2,774 Views
Not sure if any of you know but in the 3D space, there are literally trillions of settings so comes a time when you have to say................... that's it.

Must admit i'm pretty happy with this and it only took 56 minutes to render 1 frame. So I estimate that the video at 25 frames per second i'm looking at around a day of rendering for 1 second of video. 60 days per minute and my songs are around 3.30 minutes so ............... 210 days for a 3.30 minute video. Best i invest in electricity stocks

Pilot Gwen does look pretty good though. will also be adding my Pipistrel Panthera Plane i built for the Phoenix Simulator as well so that will blow the 210 days out no doubt lol.

Please if anyone can give me some hints with some quicker rendering with Daz Studio and iRay, please let me know if i can knock a couple of days of this adventure
Posted by phyngineer | Dec 12, 2019 @ 04:39 AM | 2,209 Views
UAV tilt photography technology can truly reflect the situation of the ground, and through advanced positioning technology, it can embed accurate geographic information and pick up richer image information. The birth of oblique photography technology may subvert the traditional surveying and mapping operation method.

For many years, the topographical mapping and geographic information acquisition work have mainly adopted manual operation mode, measuring and mapping people's footsteps, traversing mountains and rivers, year-round field trips, and hard work. Such field labor has problems such as high intensity, complicated procedures, time-consuming and high cost. With the development of science and technology, the surveying and mapping industry has become increasingly demanding for the accuracy and timeliness of geographic information data. Labor and time costs have also brought tremendous pressure and burden on the industry. Therefore, the surveying and mapping industry need to be able to quickly and efficiently, Accurate solutions for obtaining geographic information and data.

The birth of UAV tilt photography technology has overturned the traditional surveying and mapping operation method. This technology acquires high-definition stereoscopic image data through low-altitude multi-lens photography of drones, automatically generates three-dimensional geographic information models, and quickly realizes the acquisition of geographic information. Features such as high...Continue Reading
Posted by drewdb | Dec 12, 2019 @ 04:01 AM | 2,601 Views
Getting there on a more realistic lighting. Her skin is looking more real. 80% rendering time in 13 minutes for 1 frame.

"Are we there yet?" .......... not quite! I want the skin on the face to look as real as the right hand.

In my opinion this is what all pilots should wear.


Female pilots, I don't look good in red I would certainly fly business class a lot more

I notice that people are looking but no one's commenting. Great to get some feedback.
Posted by | Dec 11, 2019 @ 03:35 PM | 4,541 Views
I've spent the last couple of weeks reviewing the new ISDT 608AC charger. It has a modular removable AC-DC power supply and the high quality build and interface that we've come to expect from ISDT across their full line. At $50-60 it is easliy the best value charger out and will suit practically every application out except for the very high currents (8A+) and multiple channels.

Anyway, my full review is here including heaps of pics of the operating screens which I find easier to lear by than the included manual:

Posted by unboxingexp | Dec 11, 2019 @ 12:04 PM | 3,988 Views
Testing the Caddx Baby Turtle on my Larva-X toothpick. HD recording is pretty good, FPV feed - recorded with the DVR in my Fatshark Attitude V5 - is subpar.
Caddx Baby Turtle test (2 min 6 sec)

Posted by alex_nikiforov | Dec 11, 2019 @ 10:51 AM | 4,398 Views
ZOHD Dart250G 570mm Wingspan Sub-250 grams Sweep Forward Wing AIO EPP FPV RC Airplane KIT/PNP W/FPV Ready Version

ZOHD Dart250G. PNP версия всего 126 грамм. (12 min 44 sec)

Link: ZOHD Dart250G
Posted by angelo.p | Dec 11, 2019 @ 10:03 AM | 3,185 Views
Geelang Anger 75x - 4S Tiny whoop! (20 min 34 sec)

ANGER 75X whoop 3-4S
Size:106mm * 98mm * 53mm
Weight:46g (without battery)
Weight:76g(with Original 4s 260mah Lipo battery)
Motor:GL1202 KV6900
Flight controller:SI-F4FC Three-in-one tower Version: MATEKF411
Power supply: 2-4S battery input (DC 7-17V)
Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)

The props are 1636 Gemfan and the frame doesn't permit the use of 2 inch prop.

Anyway with 4S lipo it's a very fast Whoop and you can fly like a bigger models without limitations we are used to have on tiny Whoop. All acro maneuvers are possible with its motors.

Flight time (I set 3.5v as limit) is more or less 4 minutes.

With 3s you have less power, obviously, but you can benefit from its tiny size to have fun in very small space!

In the video you'll see some propwash in fast descent but I augmented a little the I value and the result is very good.

I will post some tuning video if it will be interesting for you.
Posted by HGLRCFPV | Dec 11, 2019 @ 04:35 AM | 2,961 Views
12.12 Sale is ON!
Free Hglrc DVR for orders over $99
Free Hglrc DVR+VTX for orders over $149
and a 12.12 lucky draw!
visit for more details
Name: 双12旧官网fb海报.jpg
Views: 0
Size: 467.2 KB
Posted by drewdb | Dec 11, 2019 @ 02:58 AM | 3,465 Views
Almost ready to start a full test render. Probably take around a day.

Messing with lighting and such. New hair that i want to move with the dance as well. Fingers crossed.

Will add something to make it to do with RC

Note: her top only came in a small size so the camera is up a bit