Iv just done a video on this but I wanted to share some of my thoughts about the DJI Smart Controller for the Mavic 2 Series.

DJI Smart Controller For Mavic 2 - My Thoughts & Spec Walk-thorough (8 min 53 sec)

My Thoughts

Having been rumoured since the release of the Mavic 2 this RC has always been one that has divided opinion and that stands true today more than ever.

The Smart Controller is an all in one RC and built in Crystalsky 5.5” smart device similar to what we have seen with the ST16 from Yuneec and the new Herelink system from Proficnc.

It takes what DJI did with the Plus remote on the Phantom 4 series and takes it to the next level, saying this is simply the Mavic RC and Crystalsky combined is not fully true and it’s more like a Crystalsky 2.0 with many overall improvements to the OS and device performance.
The Screen is the same 1000 nits brightness we seen on Crystalsky but touch responsiveness is much improved I have been told, connectivity is plentiful with USB C for charging and firmware updates, HDMI output, USB A Output and a Micro SD Card slot.

A note that shows how the internals have been beefed up is the fact is will now play back 4K footage from the SD card and output this via HDMI in 4K, the original CS was limited to 1080P.

Buttons wise you have all the same ones from the original RC like Power,RTL,Pause, Shutter,Record and the 5D, on each corner there is the camera setting wheel and the gimbal control.

In this video I am unboxing the Herelink Digital FPV and remote system for Pixhawk and Mavlink system from ProfiCNC and Hex Aero.

Herelink HD FPV RC For Pixhawk & The Cube Unboxing & Overview (13 min 41 sec)

You can pre order this now from https://www.3dxr.co.uk in the uk.