Posted by DutchRC | Today @ 03:04 PM | 155 Views
Halloa FPV pilots

so yes.. I'm not really the first to be reviewing this ER349 huh? I ordered in a sale a while back and had not come around to actually flying it yet :$
BUT.. I thought it would be nice combine my first-flight-experience with it with some insight into the RC industry...

Link to this quad: Eachine ER349se 3-inch racer

Diatone / Eachine ER349se - the best Eachine E V E R ! :D (19 min 52 sec)


Lipo used: GensAce Tattu R-line 850mah 4S

Specifications:
type: FPV Racing quad
wheelbase: 135 mm
base thickness: 3.5mm
material(s): carbon fiber + plastick
flight controller: Mamba F405 mini MK2
firmware version: 3.5.1
ESC's: Mamba 4x25A 4 in one, Dshot1200
motors: Mamba MB1408 4000 kv
propellors: GemFan Flash 3052 & some other alternate props
FPV camera: Runcam micro Swift 2
VTX: TBS Unify pro
Lipo: 650mah 4S (not included)
OSD: Yes, Betaflight
smart audio: yes (TBS)
buzzer: yes
LED's: YES!
spare props: yes, 1 set
Posted by GLSJr | Today @ 01:57 PM | 169 Views
Just when I'm feeling confident that I have a handle on this electric stuff, I get thrown a curve. I just discovered Anti-spark connectors. Apparently they can prevent a massive blast of hundreds of amps to your on-board electronics, such as the ESC. However, they're not fool-proof, and can find themselves melted down. Found it on You Tube (Tech Tuesday). Anyone had any experience with thunder claps inside your plane?
Posted by PittSpecial | Today @ 01:04 PM | 198 Views
Heck!

Talk about a revisiting an OLD and previously thought Long Gone GWS SLOW STICK!

https://www.rcgroups.com/forums/show...s-at-Graves-RC



Posted by GroundControlRC | Today @ 08:32 AM | 404 Views


Tip #30 - CrazyBee Flight Controller Rebooting Issue Fix!

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Mobula7 #CrazyBee

Here is a link to the Video:
https://www.youtube.com/watch?v=slSDS_noJAk

I had an issue with my Brand New Mobula 7 Power Whoop which has a CrazyBee Flight Controller.
The Flight Controller would reboot during flight about every 10-15 seconds.
This fix took care of this issue ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to this Flight Controller, Power Whoop, Spare Parts, Upgrade Parts, & LIPOs:

Happymodel Crazybee F4 Pro V2.0 Mobula7 HD 1-3S Flight Controller w/ 5A ESC & Compatible Flysky/Frsky/DSMX Receiver
https://www.banggood.com/Happymodel-...47791920140372

Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop (***Select Receiver Type YOU need!)
https://www.banggood.com/Happymodel-...47791920140372

Happymodel 3.8V 300mAh 30C 1-2S Lipo Battery PH2.0 Plug for Mobula7 Snapper6/7/8 UR65 US65 UK65
https://www.banggood.com/Happymodel-...47791920140372

10Pcs URUAV 3.8V 300mAh 40/80C 1S HV 4.35V PH2.0 Lipo Battery
https://www.banggood.com/10Pcs-URUAV...47791920140372

10Pcs URUAV 3.8V 300Mah 40/80C 1S HV 4.35V Lipo Battery PH2.0 Plug for Eachine TRASHCAN Snapper6 7 Mobula7
https://www.banggood.com/10Pcs-URUAV...47791920140372

Happymodel Mobula7 Part 40mm 1.0mm Hole 4-Blade...Continue Reading
Posted by RADIOLINKRC | Today @ 07:02 AM | 494 Views
Hiiiiii friends!

RadioLink has recently launched a new aircraft, fixed wing A560 and is now inviting all RC fans who are interested in fixed wing to make reviews.


Features of A560
  • The exclusive and expertly tuned flight controller algorithm makes A560 possible to flight even in limited space including indoors
  • Handy enough for beginners with specially developed flight controller but enjoyable with free styles for fixed wing experts
  • Compact size (560mm of wingspan), super lightweight (139.5g) and extremely durable PP foam airframe
  • Factory-installed flight controller, servos and power systems with approximate assembly time of less than 10mins
  • Super-simple transmitter setup- no complex programming required
  • Powerful brushless motors compatible with 2S 660mAh batteries with flight time of more than 10mins
  • Completion Level: Bind-N-Fly
  • Minimum Required Radio: all R/C supported with SBUS/PPM signals

Click http://radiolink.com.cn/doce/product-detail-146.html to know more about A560.

A560 Flight with Single Hand (2 min 45 sec)

A560 Vertical Flight (0 min 44 sec)
...Continue Reading
Posted by Qwinout | Today @ 04:46 AM | 564 Views
Jumper T16 Pro Hall Gimbal Open Source Built-in Module Multi-protocol Radio Transmitter 2.4G 16CH 4.3" LCD

https://qwinout.com/collections/radi...g-16ch-4-3-lcd

Mode 1 = right hand throttle

Mode 2 = left hand throttle

The T16 Pro version does indeed support Crossfire and in CRSF mode with LUA script support and most importabtly users could use JP4in1 and CRSF a same time.If you are looking for the most compact, most afforabe and most EPIC Crossfire compatible TXin the market today look no further than the Jumper T16 Pro.

Jumper T16 Pro features:
Gimbal Type: HALL SENSOR
Built-in Multi-protocol Module
Removable battery
Supports Telemetry
Memory 16M (can be expanded by Micro SD card)
Voice function
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display
Wheel menu button
Compatible with JumperTX (An independent fork of OpenTX)
Industrial grade 4.3 inch 480*272 outdoor readable color screen
Posted by Qwinout | Today @ 04:38 AM | 564 Views
https://qwinout.com/blogs/news/qwino...jumper-t16-pro

18 is the Lucky Number of www.qwinout.com
So from today on,we will offer a surprise for each number End with 18,for example, the order number.
QwinOut1518 will receive a Jumper T16 Pro as free gift
https://qwinout.com/collections/radi...g-16ch-4-3-lcd
Posted by visioneer_one | Today @ 01:58 AM | 637 Views
Responded to the OP. Placed my order on Monday, received it today (Wednesday.) I'm currently stateside, so shipping was delightfully quick!





...Continue Reading
Posted by Montanaman2 | Today @ 01:24 AM | 611 Views
If you have it contact me
Posted by Hobby Details | Yesterday @ 09:10 PM | 795 Views
Premium Allen Wrench Set - Breakstone Honeycomb 4pcs
DTT02012 Hex1.5 x 180mm
DTT02013 Hex2.0 x 180mm
DTT02014 Hex2.5 x 180mm
DTT02015 Hex3.0 x 180mm
Titanium Tips

4pcs/set
Optional to change to with SAE(Inch) Hex or Ball Head Tips, same price
Wholesale Price please PM or contact me at: [email protected]
Posted by Kmot | Yesterday @ 04:59 PM | 911 Views

Posted by JureZ | Yesterday @ 01:19 PM | 1,026 Views
GWS F-15 , built as pusher with an outrunner motor at the tail , split elevators and ailerons , belly lander .

AUW is 948g or 33.44 oz. Motor is from the Freewing Moray : 3040 , Kv = 1400 , weight = 114 gram ,

8*6 MAS S2 propeller , and 3S 2200 mAh LiPo battery. Static current is 19A full throttle.



After years in the attic, finally saw the light of day , and got a maiden flight ! great success !


GWS F-15 Eagle - Movie (2 min 8 sec)

Posted by nigelsheffield | Yesterday @ 12:14 PM | 1,105 Views
Links in the description for bikes mentioned and the phone holder which is good to have for any bike as it will not only hold the phone so you can use it for GPS computer and sat have etc but carry a power bank in there to save the battery.
Discount codes in there too.
What a great way to explore the area this is and I've found lots of interesting places in Yorkshire to fly my quads ( once the weather gives me a chance and stops RAINING )
400 mile 4 week update on the $500 Fiido d3s electric"folding" bike ebike and mods. (7 min 30 sec)

Posted by JohnVH | Yesterday @ 11:40 AM | 1,049 Views
Another great flight on the 94.5" HKing Navy cub at the BellairRCFlyers Warbird event. More info in the video description on YT.
H-King 94.5" Navy Piper J-3 Cub 2400mm from HobbyKing BellairRC Event Flight!! (4 min 29 sec)

Posted by UnknownForces RC | Yesterday @ 11:28 AM | 1,045 Views
GR1 4WD Gear Modulus 1.5 (0 min 16 sec)


GR1 4WD gears, machined teeth, higher strength and precision,more durable, gear modulus 1.5.

Our gears always run in dual ball bearings to reduce radial runout. We also strive for larger dimension bearings wherever possible to increase their load carrying capabilities for longer life and reduced maintenance. We are not just making products, we care for every detail.
Posted by CluelessSeller | Yesterday @ 10:46 AM | 1,089 Views
Might anyone be interested in making an offer on this lot of OK Cub parts? I count 165 envelopes, however some envelopes have several envelopes inside. Thanks!


Posted by mr.kmit | Yesterday @ 09:21 AM | 1,111 Views
MFD Crosswind mini (8 min 5 sec)

Posted by GLSJr | Yesterday @ 09:11 AM | 1,124 Views
I'm just starting to acquire an assortment of various connectors. I want to switch all my battery connectors to XT150's. I was perusing You Tube and ran across a guy who was talking about them, and the problems he had with the connectors he had bought from different suppliers. Specifically Hobby King and Amazon. I buy all my connectors (Deans, XT60, bullets) from Amazon, but not the XT150 yet. Since Amazon cites their sources, I kind of feel like maybe I can avoid a knock-off and grade B quality. For instance, the shield around the bullets is quite flexible (and a different color) from Hobby King. But he also said that the male bullets extended beyond its shield from Amazon (Amass). Where do you guys get quality connectors?