PittSpecial's blog View Details
Archive for November, 2016
Posted by PittSpecial | Nov 06, 2016 @ 09:13 PM | 10,740 Views

Just came back from the RC Club Field and flew it for 4 wonderful flights on this beaten but, still flyable and still relatively good looking model.

I used an old but, good condition FMS Model G&C 3648-KV600 brushless outrunner motor and a eRC 45-AMP Brushless ESC.

Of course the propeller selection is on the small diameter size and used the Master Airscrew wooden 11 X 6 propeller but, it performed really well and keeps the AMP draw down considerably.

A few pictures of my work from two days and nights fixing this model up for flight worthy.

Things still to do is re-route the ESC -to- Battery connector over to the frontal area to get more slack as it is a pain to connect at the rearwards with little or no slack. Also, I might try an APC "E" 12 X 8 propeller....Continue Reading