frank4wing's blog View Details
Posted by frank4wing | Jun 08, 2019 @ 02:35 AM | 469 Views
Sunset Cruise with the Armattan Gecko and the Caddx Turtle, this time on 3S instead of 4S, went faster than expected.

I set the Turtle from 60 to 30 FPS for a change. For that golden hour look I reduced blue significantly in the editor. The sound is recorded from the Caddx and heavily filtered as usual.

-
Armattan Gecko Sunset Rip (4 min 24 sec)


Caddx Turtle v2 settings:
Runcam M12 glass lens.
Exposure EV-0.3, Saturation 6, Sharpness 4.
Firmware 2019/01/24 - https://t1p.de/06nm

Armattan Gecko 3" frame - https://t1p.de/kn46
Caddx Turtle v2 - https://t1p.de/zd0s
Runcam M12 glass lens - https://t1p.de/5xyd
T-Motor 1408 3750KV - https://t1p.de/qgig
HGLRC XJB F428 https://t1p.de/mag8
HGLRC XJB TX20 v2 https://t1p.de/vshd
FrSky XM+ Receiver https://t1p.de/9d9k
Foxeer Lollipop - https://t1p.de/mywn
Gemfan Flash 3052 Props - https://t1p.de/z1qr
Torcster 3S/850mAh
Posted by frank4wing | May 29, 2019 @ 05:00 AM | 472 Views
The Armattan Gecko is my favorite quad at the moment and the Caddx Turtle is one of the reasons. I noticed some propwash when I watched the video below so I inreased D by about 10 percent and it's almost gone now.

Caddx Turtle, Armattan Gecko (3 min 57 sec)

Posted by frank4wing | May 24, 2019 @ 04:40 PM | 2,838 Views
The Caddx Ratel FPV cam has amazing low light abilities. The 3" quad in this video has a cheap LED flashlight on top and weighs 170g including a 3s 450mAh battery.

Caddx Ratel Night Test (4 min 34 sec)


-
Posted by frank4wing | May 09, 2019 @ 10:11 AM | 553 Views
Same settings as for the Turtle as before but I had to do some color grading, maybe because it was a bit cloudy.

Lost Bridge (4 min 3 sec)

Posted by frank4wing | Apr 22, 2019 @ 02:37 AM | 831 Views
In this video I used different filters for the sound in the edit but I did not touch the image quality which looks quite good to me. You'll find the changed settings, a link to the firmware and other stuff in the video description if you're interested.

I wish we could have a better FPV image quality with these cameras though. Flying safely near trees with lots of leafless branches is still a matter of luck.

Armattan Gecko, Caddx Turtle (3 min 57 sec)

Posted by frank4wing | Apr 02, 2019 @ 04:47 PM | 692 Views
I didn't change the settings of the Turtle yet. The Gecko 3 inch flies very smooth and stable, almost like a 5 inch.

Wing Watchers, Pt. 2 - Armattan Gecko, Caddx Turtle (3 min 15 sec)

Posted by frank4wing | Mar 27, 2019 @ 05:58 PM | 922 Views
I built a 2s brushless Whoop from Mobula7, Trashcan and other parts and it flies really awesome.

Whoop's Got Talent, Next Season (3 min 4 sec)

Posted by frank4wing | Feb 21, 2019 @ 02:06 AM | 1,534 Views
I wanted some more footage from the Mobius Mini. This thing is a bit heavy for 3 inch which made chasing the wings more difficult but I like the picture quality.

Wing Twins, Mobius Mini on XJB-145 (4 min 15 sec)

Posted by frank4wing | Feb 03, 2019 @ 12:45 PM | 2,202 Views
I had the chance to rip the snow covered quarry for another one pack one take clip.

Quarry, XJB-145, Firefly Micro (4 min 27 sec)


The HGLRC XJB-145mm I used here had its maiden flight exactly one year ago. Happy birthday little one!


Posted by frank4wing | Jan 11, 2019 @ 01:51 PM | 2,159 Views
A major part of one of Germany's most famous ruins, "Building No. 10", has been torn down. The Continental factory in Hannover-Limmer was founded in 1899. Its buildings had covered the whole peninsula until they started to tear them down after the production had been moved to other sites in 1999. The remnants are classified and protected as historical monuments by law but unlike the restored tower the big representative building at the channel side is in an extremely bad condition and its future uncertain.

The excavator driver is a very nice guy and didn't mind our little quads buzzing around his 50 tons demolition monster.

Conti No. 10 Down, DJI Mavic Pro (9 min 12 sec)

Conti No. 10 Epilogue, XJB-145, Firefly Micro (4 min 4 sec)
...Continue Reading
Posted by frank4wing | Dec 25, 2018 @ 07:10 AM | 2,590 Views
Posted by frank4wing | Dec 10, 2018 @ 06:06 AM | 2,116 Views
Another frankensteined XJB-145, this time in a GEPRC MX3 frame with a Mobius Mini mounted to the top. The Mobius is a little gem that makes a brilliant picture and has a nice software to configure it.

XJB-145 & Mobius Mini, First Take (3 min 29 sec)

Posted by frank4wing | Nov 23, 2018 @ 01:31 PM | 3,168 Views
FlyFox 135mm, GEPRC GR1206, Superview (4 min 18 sec)


Here I tried to get the most out of a micro CCD FPV feed recorded by the goggles.

Postprocessing of the original 5:4 PAL footage has been done with the freeware programs Shotcut and GoPro Studio 2.5.9.2658 using the "4:3 to Wide" preset that apparently works like "Superview", which is nonlinear picture stretching.

DVR is made using the Eachine EV800d which is the best googles for DVR I know, much better than Fatshark. The Quad is a FlyFox 135mm frame based build with a HGLR F428 stack, GEPRC 1206 4500kv motors and a Foxeer Arrow Micro Pro cam. Links and Details in the video description text.

-
Posted by frank4wing | Oct 20, 2018 @ 02:12 AM | 2,536 Views