Posted by Saijin_Naib | Jul 21, 2016 @ 12:16 AM | 3,602 Views
RC Logger EYE One S - Rate/Acro Mode Practice: #2 [RunCamHD2] (6 min 21 sec)


Trying to fly the RC Logger EYE One S in Rate/Acro mode and having a bit of a hard time of it. I've only ever attempted once prior on my Dromida Ominus and my EYE One S, so this is going to be a long and slow progression for me. Completely unlike flying stabilized.
------------------------------------------------------------------------------------------
Video Source: RunCamHD2
Audio Source: RunCamHD2
Music Source: Subtle Build - Antitune [SoundCloud Works - ????]
Music Source: soil - antitune [circles. - 2014]
Music Source: See & Get - Antitune [SoundCloud Works - ????]
Music Source: 0019 - Antitune [instrumentapellas - 2011]
Video Editing: Serif MoviePlus X6
------------------------------------------------------------------------------------------
Posted by Saijin_Naib | Jul 21, 2016 @ 12:15 AM | 3,498 Views
RC Logger EYE One S - Rate/Acro Mode Practice #1 [Lumia 640] (0 min 39 sec)

Trying to fly my new RC Logger EYE One S in Rate mode for the first time on this platform (second time ever). Needless to say, it does not go well.

Next time!
------------------------------------------------------------------------------------------
Video Source: Microsoft Lumia 640
Audio Source: Microsoft Lumia 640
Music Source: sixteen. - antitune [brainsmoke - 2011]
Video Editing: Serif MoviePlus X6
------------------------------------------------------------------------------------------
Posted by Saijin_Naib | Jul 21, 2016 @ 12:15 AM | 3,393 Views
Just got two of these beast minis. One for me, one for the fiance.

They're so tiny! I put my Proto-X SLT on top to give an idea of the scale of the box. I can't wait to get it open, charged up and out to fly.


Posted by Blusky1 | Jul 20, 2016 @ 07:46 PM | 96,236 Views
Matrice 600 in action filmed automatically with Phantom 4 by intelligentUAS (1 min 29 sec)


The video is in 4k using the phantom 4 in active track mode to follow the M600. This configuration is the M600+Gremsy H3+Canon 5D M3 with 28 minutes of flight time
Posted by Thermalflyer | Jul 20, 2016 @ 04:31 PM | 2,525 Views
Wing joiner rods finally in now able to assemble the plane. Next steps final sanding and covering.
I keep calling this plane a Pegasus- Because I used Stan Watsons plans to build the wing and stab. But the fuselage is Dale Folkenings Dynasoar. I didnt realize this until I tried to put the wings on the fuselage. There was considerable difference in the angle of the wing at the point where it would mount on the fairing protruding from the fuselage. Another difference was the airfoil. Stans airfoil was more like a Clark Y and the airfoil on the Dynasoar fuselage was more like a Eppler 193, which was what used for the wing. The E 193 is much thinner, creating a bit of challenge in mounting the 3/8 rods at the proper angle for some dihedral. All of these little things made the project go on and on.
Posted by Slider2732 | Jul 20, 2016 @ 03:28 PM | 8,901 Views
Clean forgot to post this build from a couple of weeks ago...
R/T for roasting tin.

Having never flown an EDF anything, a natural thought would have been to build a jet...as any sensible person would do.
So, a Nutball type shape was decided on
I grabbed the kitchen roasting tin and set about making an elongated Nutball....a bit like go faster stripes, the body of it would be stretched. It still doesn't make sense does it.

On to the shape went a brushed GWS 40mm EDF, salvaged from a crashed Kid Galaxy flying wing from circa 2009, that I bought at a seconds store.
10-15A brushed ESC, ex Harbor Freight Mustang I believe
AR6310 RX
2x 3.7g servo's
260mA Venom 2S lipo
12.6" wingspan, 17" length
RET controls
AUW 3.2oz

It was too heavy on the first flight attempts. So, off came the landing skids underneath, the other ESC was replaced by this Harbor Freight one (lightened by removing plastics and changing the wire gauge) and also the thrust tube was completely removed.
And now....now she flew !

Jetball R/T - what the heck ? (3 min 16 sec)

Posted by FoamieNinja | Jul 20, 2016 @ 02:43 PM | 15,688 Views
It's been a while since my last update... So I figured I should follow up with the last place I've been.



As you know, FliteFest 2016 ran last week - July 14-17, with people arriving as early as the 12th.
I arrived early Wednesday, just to see what was going on. We got everything set up, and started off a bit slow for the weekend.

Surprisingly, all of the (preregistered) camping spots filled quickly, as people began to peak around Friday.

Though it did feel a bit different than the previous year, it was still a decently well rounded experience. There were a few less-than-friendly volunteers that aimed to cause a minor stir here and there, but at the same time, I was able to meet up with those I saw from the previous year, as well as from other events.

Most notably, The RC Saylors, Greg Bowles, and a few others. All of which are amazing people.

I'll have to do a photo dump later, to cover what I had time to get footage of.

On the other side of things, this is where my tandem design was given a chance to shine. I brought the original prototype, as well as the 250, 450, and 1800mm versions. I drew quite the crowd with them, especially the latter.

The 1800 turned out to be a major success. Not only drawing a crowd of hundreds of people, It struck the interest of many others.

FNRC NinjaBite - The HCT-1800 Lifts Off. (2 min 35 sec)


FNRC Sneak Peek - The Beast comes to FliteFest 2016! (6 min 23 sec)
...Continue Reading
Posted by scousethief | Jul 20, 2016 @ 02:19 PM | 3,930 Views
http://www.banggood.com/Diatone-Crus...e-crusader-165

Current Price 176.90 / $ 229.99

This is Gorgeous !


The Diatone Crusader is a Built PNP with Naze32 Rev 6 controller, 200mW transmitter, D20 4S OPTO and powerful motors! These can be very aggressive for racing or docile for learning to fly. In Cleanflight adjust your Roll, Pitch and Yaw rate to your liking.

Description:
Brand: Diatone
Item name: Crusader 165
Size: 165mm
Flight controller: Naze32 Rev6b
ESC: D20 4S OPTO
Video transmitter: Diatone SP1 40CH 200mW
Camera: 800TVL 1/3" mini camera
Motors: 2204 2300KV
Battery recommend: 4S (not included)
Remote control recommend: 2.4G, at least 4CH (according to your needs, not included)
Receiver recommend: 2.4G, at least 4CH (according to your needs, not included)
(Naze32 Rev6b flight controller isn't compatible with specktrum receiver)
Antenna: RHCP
Prop Size: 4 inch
Weight: 230g (all but battery, props and receiver)

Features:
Running Cleanflight or Betaflight these come fully assembled and only need a receiver and a battery! Attach the included propellers and antenna and you are off!

Note: this is the PNP (Plug and Play) version that comes without battery, charger, receiver or remote control.

Package included:
1 x Diatone Crusader 165 X Racer Frame


Modular Design ? YUP



200mw 40ch VTX ? YUP dont need 600mw in race class

...Continue Reading
Posted by Thomas B. | Jul 20, 2016 @ 02:15 PM | 8,526 Views
This is my newest download plan project: a 80cm Depron aerobat inspired by Howard Ike/Mike and Brown B1/B2.
FLies great on 3s 1000mAh lipo.
Retro 3D Prototyp (3 min 14 sec)

Posted by beaujack | Jul 20, 2016 @ 02:02 PM | 2,874 Views
Can anyone tell me what type this plug is called? It's for my jr x2720 and want to make some charging leads for my tx batteries, the closest plug I can find is a jst-ph but probably won't fit, when I search on Google it's just called a jr plug, not very helpfully. Pictures to follow. Any help would be great.
Posted by theimacman | Jul 20, 2016 @ 01:45 PM | 2,846 Views
Inverted-flying 3D quadcopter from Dromida.

Dromida - Verso (3D) - Review and Flight (11 min 29 sec)

Posted by theimacman | Jul 20, 2016 @ 01:43 PM | 2,559 Views
This quad looks like some sort of spider or headcrab.

Eachine - E20 Aircraft (3D) - Review and Flight (16 min 46 sec)

Posted by KatrinaRosen | Jul 20, 2016 @ 12:42 PM | 1,990 Views
Airbus uses drones for aircraft inspections. The drone can take pictures of the airplanes and look for scratches, dents, and other damages. Airbus can then use those images to construct a 3D digital model of the plane that the company said can help prevent and reduce additional airplane damage. This cuts down the inspection time from two hours to 10 to 15 minutes.
http://fortune.com/2016/07/15/airbus...ne-inspection/
Posted by scousethief | Jul 20, 2016 @ 12:07 PM | 3,888 Views
http://www.banggood.com/Xiaomi-Mi-Dr...n=Xiaomi-Drone



PREORDER 423.04 / $ 549.99

rand: Xiaomi
Camera:4K and 1080P Wifi FPV
Gimbal:3 Axis
Smart Battery:5100mah 17.4V
Flying time:27 mins


Features:
- With 4K and 1080P Wifi FPV camera,3-Axis gambal.
- 2KM and you can see 720P video in the screen.
- With Pointing flight feature,the drone can fly to the point you touch.
- With Surround feature,can surround the point.
- It can also flight the routes you set.
- APP control,XIAOMI quadcopter will preview controlled by transmitter or APP.
- 4-propeller system with detachable shields
- 17.4V battery 5100mAh, 27 minutes non-stop flying
- 4K camera at 3840 x 2160 pixels; supports recording of stills in RAW format
- Camera attached to a 3-axis gimbal, stabilizes up to 2000 vibrations per second
- Unbelievably lightweight design
- GPS + GLONASS + vision-based positioning for max precision
- Autopilot options: automatic take-off + landing, waypoint flight path planning, tap to fly on map, circle an object on the ground
- Intelligently detects low battery and returns home automatically
- Real-time location tracking for easy retrieval even post crash
- Hovers automatically at the edge of no-fly zones
- Built-in PCB antenna array in remote control for maximum reach
- Modular design and foldable landing gear



Package Included:
1 x RC Quadcopter
1 x Gimbal
1 x Charger
8 x Propeller
1 x Transmitter
1 x Manual



...Continue Reading
Posted by scousethief | Jul 20, 2016 @ 11:03 AM | 3,743 Views
http://www.banggood.com/Tiny-QX90-90...aign=Tiny-QX90

Current Price 50.76 / $ 65.99



Specification:
Wheelbase: 90mm
Flight controller: SP RACING F3_EVO_Brush
Motor: 8520 Brush Motor
Built-in Frsky 8ch SBUS/PPM Receiver
Camera: 520TVL Camera
AV Wireless Transmitter: 5.8g 25mw 32ch
Batterry: 3.7V 650mah Lipo battery
Flight time: 5-6 minutes

Compatible with:
FRSKY taranis X9D(D8 Mode)
XJT (D8 Mode),DJT DFT DHT BIND and Flight

Package included:
1 x QX90 Carbon Fibre Frame kit
4 x 8520 Coreless Motor
1 x F3_EVO_Brush Flight controller
1 x 8CH Receiver
1 x 520TVL Camera
4 x Blade
1 x Battery
1 x Charger


Posted by Dewey_96 | Jul 20, 2016 @ 10:10 AM | 3,557 Views
Need to catch my blog up in documenting my start in the hobby.

Got my Eflite Spitfire and had been flying it pretty much anytime I could. I have a good 25+ flights into it and am now greasing landings without SAFE most of the time. There are some instances where crosswinds or being a little "hot" on my approach have me going around and I'll use SAFE to help me out there if I'm low to the deck, but that's the point for me... to use it to help out when I'm in a spot that I'm still learning. I'd say SAFE gets used about once every 3 flights for any significant reason... I do use it sometimes to relax and check my surroundings since my kids like to be out with me while I'm flying.

BUT... The Spit is on the shelf for a little bit. I had my first good crash with it the other day and it rattled me a little bit. I took it out and on my first TOFF it rolled left and I cut power and it dove into the high grass along my landing strip. It wasn't too high but had some speed and it took some paint off the leading edge. I cleaned out the grass, checked my surfaces again, taxied it, rebound it and tried another TOFF. Another left roll, tried to get it back on the ground and it went into the grass on the right when I over corrected between rudder and aileron. Again, nothing serious, just yellow paint off the leading edge. I about quit, but tried one more time. This time the roll hit harder and ran me into a pole that took a 1" x 1" chunk out of the...Continue Reading
Posted by AliB | Jul 20, 2016 @ 07:23 AM | 6,138 Views
Since summer is fully upon us in the UK, I have really been enjoying my freestyle flying. Constantly trying to learn new tricks which is very rewards.

Here is my latest video from a school playing field not far from my house.
A lot of fun

Starry Eyed (2 min 53 sec)

Posted by basicbill | Jul 20, 2016 @ 07:06 AM | 3,667 Views
My Typhoon H CGO3+ camera was inconsistent in image quality. Most of the time it was excellent. But occasionally the distant focus was off. So I've got a replacement camera coming from Yuneec. After I called their customer service, the rep offered to swap it out, no questions asked. I was sent an RMA and a UPS shipping label, too. Once I proved that I had indeed dropped the camera off at a UPS Store they got my replacement shipped.

So I've been using my backup... the Chroma.

Here's my latest train video from it. These videos typically incorporate several different cameras. Both ground and airborne.

NS 8098 East - the Conrail Heritage Engine with Drone Views on 7-16-2016 (3 min 46 sec)

Posted by Gensace - agnes | Jul 20, 2016 @ 05:29 AM | 2,495 Views
‪#‎New‬ arrival from USA#
For those who are waiting for batteries of helis,batteries of cars,batteries of FPVs,New stock has finally arrived,As below are some from the arrival list;
Fun shopping
www.genstattu.com
TA-15C-12000-6S1P-AS150
GA-B-30C-5300-3S1P-Deans
GA-B-25C-1300-3S1P-Deans
GA-B-30C-2200-3S1P-Deans
GA-B-50C-6500-2S1P-HardCase-10
GA-B-25C-2200-2S1P-TRX
GA-B-45C-2200-3S1P-Deans
GA-B-65C-5300-2S1P-HardCase-10
GA-B-25C-4000-3S1P-Deans
GA-B-25C-3300-3S1P-Deans
TA-15C-16000-6S1P-AS150
GA-B-70C-7200-2S1P-HardCase-10
GA-B-25C-2600-3S1P-Deans
TA-45C-1300-3S1P-XT60
TA-45C-1300-4S1P-XT60
GA-B-70C-7200-2S1P-HardCase-47
GA-B-70C-7200-4S1P-HardCase-14
GA-B-60C-5500-6S1P-EC5
TA-15C-12000-6S1P-EC5