Posted by Tazkiller85 | Today @ 06:13 AM | 59 Views
Yep Les Amis,
"CinémaDynamique" ! Lol ... Nous testons aujourd'hui le nouveau SECTOR150 HD de chez HGLRC. Une bonne machine, bien équipée et bien réglée à la sortie de la boite. Ce nouvel engin vous permettra de vous initier à deux pilotages différents, la cinématique douce et un peu plus dynamique, donc chacun y trouvera son compte . Par contre, je relève le même défaut de conception que le Sector 132 au niveau de la frame un peu fine et flexible et surtout au niveau des bras. Le reste est bien conçu et l'engin est très agréable à piloter. La Caddx Vista apporte un bon rendu en FPV mais la fixation est à améliorer pour réduire les vibrations. En bref, un bon petit appareil pour de la cinématique mais un peu faiblard pour du freestyle un peu risqué ! Bon Film et merci à tous pour votre soutien .

HGLRC SECTOR 150 HD - Review Test Démo - Dynamique CinéWhoop ! (33 min 58 sec)


NOTATAZ : 16.5/20 Pas mal ...

Les + : Réactif, Précis, Très stable, Autonomie correcte, Réglages ok sorti de boite, bien équipé.
Les - : Fragilité des bras de la frame au niveau des fixations moteur comme le Sector132, Rapport qualité prix moyen, Fixation caméra trop léger.

Chez HGLRC :
- HGLRC SECTOR 150 HD 4/6S (CADDX) : https://bit.ly/2J8ldZ5
- HGLRC SECTOR 150 HD (DJI) : https://bit.ly/2KzbAD7
- HGLRC SECTOR 150 Frame : https://bit.ly/2V1jtTS
- HGLRC SECTOR 150 (RATEL) : https://bit.ly/3m5ZIqj
- LIPO Kratos 4S 850mAh : https://bit.ly/33gURuP

...Continue Reading
Posted by Tazkiller85 | Today @ 06:11 AM | 60 Views
Wltoys 124019 - Reglages Review Test Démo - Un bon petit Buggy ! (36 min 50 sec)


NOTATAZ : 18.5/20 Toujours pas déçu !!!

- Chronologie de la vidéo :
Présentation et Unboxing : 00:47
Réglages et préparation : 14:23
Test pilotage : 23:10
Conclusion : 34:58
Outro et ralentis : : 36:13

Niveau : Débutant, Amateur
Les + : Petit prix, Châssis Alu, Amortisseurs performants, Bien conçue, Système de clips efficace (biellettes, rotules), Résistante, Excellente tenue de route.
Les - : Vitesse max 50km/h au lieu des 60 donnés, Pas de notice en français.

- Wltoys 124019 RTR 1/12 (Coupon BG124019 ) : https://bit.ly/2IGr0EA
- Wltoys 124018 RTR 1/12 : https://bit.ly/3pN7I1y
- Wltoys 144001 ( Coupon BGTT10 ) 63€ : http://bit.ly/2RjIPvM
- Pièces détachées et Upgrade : https://bit.ly/3357B7K
- Roues complètes : https://bit.ly/36R99Dw
- Lipo 2S 2600mAh : https://bit.ly/3pOn31X
- SKYRC GSM020 Bluetooth GPS : https://bit.ly/2EQ1ICi
- Huile Différentiel : https://goo.gl/o1kdwe
- Huile Amortisseur : https://goo.gl/i5r5Tw

- TABLEAU DES PROMOS ET COUPONS BANGGOOD 2020 RC et ACCESSOIRES (remis à jour régulièrement, en utilisant ces liens, vous aidez la chaîne, ) : http://bit.ly/2OiQMPF

- Ma page BANGGOOD ( gardez ce lien en favori ou raccourci pour vos achats sur Banggood ) : http://bit.ly/2Qr7Um6

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les vidéos en produits ou matériel ): https://streamlabs.com/Tazkiller85
...Continue Reading
Posted by Eric Zhu | Today @ 05:10 AM | 136 Views
DON'T MISS IT !!! AGFRC SERVO AMAZON BLACK FRIDAY & CYBER MONDAY, 20%-25% OFF DISCOUNT!!!

Event Preview: Amazon Black Friday and Cyber ​​Monday
Location: Amazon US Store: AGFrc
Activity Start Time: GMT+8, Nov 27, 2020 (Friday)
Countdown of the event: 2 days

The annual carnival is coming again. Are you ready to buy new accessories to assemble your car?
Our Amazon US Store participated in the Amazon Black Friday and Cyber ​​Monday activities and increased great discounts. I hope you will like our products and participate in this carnival.
We have 7 products participating in prime exclusive discount, with a discount of 20% off, of which the SA86BVMW 12V servo provides an additional 5% coupon discount.🤩🤩

Name: 黑五长图(2).jpg
Views: 0
Size: 1.70 MB
Description:

1.AGFRC SA86BVMW 12V 66KG programmable brushless smart servo + AGF-SPV2 servo programmer + 25T metal servo horn

2.AGFRC A65BHL 33KG low profile programmable brushless servo + AGF-SPV2 servo programmer + 25T metal servo horn

3.AGFRC A81BHMW 45KG programmable brushless servo + AGF-SPV2 servo programmer + 25T metal servo horn

4. AGFRC A86BHM 55KG programmable brushless servo + AGF-SPV2 servo programmer + 25T metal servo horn

5. AGFRC A86BHM(Red) 55KG programmable brushless servo + AGF-SPV2 servo programmer + 25T metal servo horn

6. AGFRC A86BHM(Purple) 55KG programmable brushless servo + AGF-SPV2 servo programmer + 25T metal servo horn

7. ARX-482R receiver compatitable with sanwa FH3/FH4T FHSS Mode

Posted by QuadifyRC.com | Today @ 04:43 AM | 196 Views
I've had a customised list of specials created for my by Banggood based on the RC Cars and FPV quads and parts I've reviewed and admire. I've weeded out the 'not really a special' prices and am left with the 34 in this list. Hopefully you find something that suits:

QuadifyRC.com Banggood Black Friday Specials


Posted by Mandy Chen | Today @ 02:49 AM | 565 Views
Safe Application, Land SnaiL 930 e-board

Original imported battery with depth customized BMS with 6 protect functions to ensure the safe using.

1. Over-charge
2. Over-discharge
3. Equalization function
4. Over temp protection
5. Short circuit protection
6. Over-current protection

-

#BrotherHobby #LandSnaiL #ESkateboard #LandSnaiL930 #electricskateboard #esk8 #eboard #eboarding #elec tricskateboarding #skateboard #skate #electricscooter 
Posted by Mandy Chen | Today @ 02:31 AM | 589 Views
Assemble the drive wheel tires, Land SnaiL 930 e-board

WhatsApp/Skype: +86 13670131260


Assemble the drive wheel tires, Land SnaiL 930 e-board (1 min 52 sec)

Posted by old4570 | Today @ 12:12 AM | 812 Views
Scout E - Flight 1 Launch + Landing (17 min 43 sec)


Really interesting stuff !
Posted by spinnetti | Yesterday @ 11:22 PM | 891 Views
I had basically finished the design for 1/6 scale landing gear, counting mostly on casting and machining. With 3d printers so good now, and careful design practices I can make more of the functional parts with the 3d printer. This is not the best picture but is the complete hub. The stainless steel oleo and axle will actually bear the load, but this keeps things where they belong in addition to looking nice. Not sure yet if 3d printed scissors will hold up or if I'll need to cast or machine those.
Posted by y.takahashi | Yesterday @ 09:43 PM | 1,033 Views
RC model of YAMAHA's experimental hydrofoil OU32 manufactured in 2008.
At the time of production, it was only possible to sail in a straight line, but in 2020 this year, the hydrofoil system was completely refurbished to enable free turning movement as it surfaced. Its appearance is like a fighter running on the surface of the water.
YAMAHA OU32 Reborn ! (2 min 48 sec)

Posted by Jack Crossfire | Yesterday @ 08:25 PM | 1,181 Views
2 full days of soldering yielded the fully wired truck with mockup of the user interface panel. A mane power switch was deemed essential, given the number of servo & bluetooth radio glitches which require resets. The mane power switch doesn't cut off the 2nd battery, though. The 2nd battery feeds in through the accessory connector & the hope was to rarely have a 2nd battery.

The user interface panel was envisioned hanging off the cargo area, encapsulating all the LEDs, radios, & switches. It eventually should also contain the debug header. It was a complicated wiring job.
Posted by old4570 | Yesterday @ 05:07 PM | 1,504 Views
XK A430 did not die today (7 min 18 sec)


That gyro Blows !

Calibrating the gyro does nothing !
I kept raising the nose higher an higher and zip / nada / zero effect on the A430 hunting the ground .
Really is challenging to fly a model when it hunts terrible firmness .

More problems !
Those foam hinges are giving up .. I had to use a fair amount of tape to fix the issue ..
I would recommend taping them before flying , especially as I have only flown twice now .

Why do I keep getting rubbish XK planes .. I have 4 and every one has had issues ( PROBLEMS ) .
And looks like this XK A430 is not the exception to this troubling trend .
I dare say this will be my last XK product . I think XK has gone out of it's way to earn some distain ! ( Well done )
Posted by kopterheld | Yesterday @ 03:18 PM | 1,603 Views
iFlight Nazgul5 V2 with XING-E 2207 1800KV 6S motors with SucceX-E F4, 45A ESC’s and improved frame, Caddx Ratel camera with 25-800mW very good video transmitter VTX.

iFlight Nazgul5 V2 6S 5 Inch

Banggood – https://www.banggood.com/custlink/DGKyJaPMya

iFlight Nazgul5 V2 4S 5 Inch
Banggood – https://www.banggood.com/custlink/G3KEJjHzYB

Coupon: BG11RacEr or BGTT10

My video - iFlight Nazgul5 V2 the perfect 5 inch quad
iFlight Nazgul5 V2 der perfekter 5 Zoll Quad (5 min 32 sec)


https://kopterheld.files.wordpress.c...zgul-v2-03.png
Above the GoPro8 camera, below the good Caddx Ratel camera

https://kopterheld.files.wordpress.c...zgul-v2-07.png
6S F4 FC with 45A Blheli_S ESC’s

https://kopterheld.files.wordpress.c...zgul-v2-10.png
The thick 6S GNB battery with 1350mAh lasts about 4min flight time

https://kopterheld.files.wordpress.c...zgul-v2-09.png
Here the 6S 2207 1800KV motors well protected with the yellow TPU

https://kopterheld.files.wordpress.c...zgul-v2-08.png
This time the iFlight propellers are yellow and good

https://kopterheld.files.wordpress.c...zgul-v2-06.png
Rear iFlight RHCP antenna

https://kopterheld.files.wordpress.c...zgul-v2-02.png
GoPro Mount here with an inclination of 30 degrees, the new iFlight GoPro Mounts are fastened with a screw and can be adjusted in angle.

https://kopterheld.files.wordpress.c...zgul-v2-01.png
Nazgul5 V2 weighs 399 grams and with the GNB battery it is 603 grams. With the GoPro 8...Continue Reading
Posted by Manudepron | Yesterday @ 12:50 PM | 1,794 Views
Inspired by Peter Sripol on« Flite Test » who in 2016 cannibazed a small E Flite/Parkzone sender....https://www.flitetest.com/articles/d...et-transmitter .. I decided to made my own vintage compact sender....

See my article on this website...


http://jivaro-models.org/spectrocomp...rocompact.html...Continue Reading
Posted by unboxingexp | Yesterday @ 12:01 PM | 1,831 Views
Upgrading an old 3d printer (5 min 26 sec)

This Ender 2 3d printer is over 3 years old now. However, I like it due to its small size. Therefore, I decided to upgrade it with the aim to make it more silent and precise. Upgrades include:
-silicone hotend sock
-borosilicate glass bed
-new springs
-heat insulation
-stepper motor damper
-TL smoother
-Noctua silent fans
-metal extruder
-Mean Well power supply
Posted by RC Roundtable | Yesterday @ 09:23 AM | 2,255 Views
Episode 120: "Dearly Departed" is now live!
http://rcroundtable.com/podcasts/mp3...pisode_120.mp3

In this episode, the gang catches up on event reports, current projects, and those times when motors didn't stay attached. They chat about:
-Hangar 9 OV-10 Bronco (1:30)
-SMALL interviews (15:00)
-Fitz's Shock Cub update (24:50)
-Action Camera woes (39:40)
-Boo Boat Bash report (57:35)
-Terry's FMS CJ-6 update (1:07:50)
-Dearly departed (1:12:50)
-Single stick radio trial (1:19:23)
-Black Betty...Doculam (1:26:21)
-Lee's workbench (1:35:10)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by GroundControlRC | Yesterday @ 08:04 AM | 2,388 Views


Eachine Airloader 1280mm Wingspan Long Range FPV Plane - Review Part 3 Test Flight #3 Motor Failure!

Coupon Save 10%:BGAirloader

Eachine Airloader 1280mm Wingspan FPV Plane
https://www.banggood.com/custlink/3G3hPHTJmN

Banggood November Sale is going on now!

11.11 Shopping Guide
https://www.banggood.com/marketing-G...47791920140372

Banggood GCRC
https://www.banggood.com/custlink/GmDmQ1nVkO

Here is a link to the Video:
https://www.youtube.com/watch?v=6m_XUVWei68

***Test Prop

Gemfan 8038 8x3.8 8 Inch PC Propeller Blade 1 Pair for RC Airplane
https://www.banggood.com/Gemfan-8038...47791920140372

***LIPO Suggestions

URUAV GRAPHENE 4S 14.8V 6000mAh 100C Lipo Battery XT60 Plug
https://www.banggood.com/URUAV-GRAPH...47791920140372

URUAV 14.8V 6200mAh 120C 4S Lipo Battery XT60 Plug
https://www.banggood.com/URUAV-14_8V...47791920140372

URUAV 14.8V 7000mAh 65C 4S Lipo Battery XT60 Plug
https://www.banggood.com/URUAV-14_8V...47791920140372

URUAV 14.8V 8000mAh 30/60C 4S Lipo Battery XT60 Plug
https://www.banggood.com/URUAV-14_8V...47791920140372

You can help support us by using our affiliate links to the products above. A small commission (At No Cost To You) helps us buy more items to review.

#banggood1111 #EachineAirloader #Airloader #Eachine #banggood #GroundControlRC #GlueAndFly #GFS #ScratchBuildPlanes


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Posted by PittSpecial | Yesterday @ 07:54 AM | 3,062 Views
Hello good people,

It is very strange and amazing that I have acquired a super nice Carl Goldberg Tiger-2 (61-Inch Wing Span) from a nice gentleman locally (Used) and primarily Glow Powered back in April 2013 and it captured my eye saying to myself when in the heck I am going to get this model in the air and most importantly Electric. Well, a few days ago I finally dusted off the model and actually started on this project.

This is where it all started!
https://www.rcgroups.com/forums/show...erg-Tiger-2-40

This thread is pretty much after the fact as I have already considered several Power Systems and the one that stood out was the Model Motors AXi 2826/10 with 920Kv and Castle Creations Thunderbird 36 (36-AMP). Since this is a Sport Model, I am going for Airspeed and selected the XOAR Glow wood 10 X 7 propeller that will provide a good amount of propeller RPMs using 3-Cells, 2600mAH - 3300mAH Lithium Polymer battery packs.

Glow-To-Electric Design Considerations:

This model has a very long FUSE Tail boom, however, it is not entirely solid balsa / light ply sheet with wood (Coffin) as it does have cut-out contours for weight savings but, it still has a long FUSE tail boom nonetheless. The Main Landing gear has been bent towards the rear which tells me that the model on the ground will try to tip (rotate) rearwards if you don't keep throttle or if it goes over a bump it will tend to sway rearwards as I have seen in other Glow-To-Electric conversions (Yes,...Continue Reading
Posted by Mandy Chen | Yesterday @ 07:33 AM | 2,444 Views
Assemble Land SnaiL 930 e-board


Deack: T700 Carbon fiber
Battery: Sam sung INR18650-25R 8C Li-ion Cells 12S2P 44.4V 40A
Battery Capacity: 5Ah 222Wh
ESC: 12S 30A ESC
Hub Motor Power: 750W*2
Max load: 230KG (507lb)
Weight: 7.34KG (16.1 lb)


WhatsApp/Skype: +86 13670131260


Assemble the Skateboard - Land SnaiL 930 (18 min 5 sec)


#BrotherHobby #LandSnaiL #ESkateboard #LandSnaiL930 #electricskateboard #esk8 #eboard #eboarding #elec tricskateboarding #skateboard #skate #electricscooter 
Posted by Mandy Chen | Yesterday @ 07:06 AM | 2,507 Views
Land SnaiL 930 e-board:

1. Especial snap-on for the motor and wheel, easy assembly and easy replace. 

2. Whole sealing hub motor and lock shaft to mount, sand prevention and long service life. 

3. NSK waterproof bearing, which are dedicated for heavy load motor and maintenance-free for its lifetime.


WhatsApp/Skype: +86 13670131260


-
#BrotherHobby #LandSnaiL #ESkateboard #LandSnaiL930 #electricskateboard #esk8 #eboard #eboarding #electricskateboarding #skateboard #skate #electricscooter