.

Saw this on cnc kitchen and decided to build it. I actually built it last year, but I needed to make some changes so I figured I would document the whole thing in case anyone wanted to build one.

Filament Dry Box || How to properly store and 3D print Nylon, PC, TPU, PVA... (6 min 46 sec)

First I started with a clear box made by a company called Sterilite that I found at Walmart. The boxes dimensions are 16”l 12”w and 11”h. This box came with a (somewhat) gasketed lid and is big enough for 4 rolls of filament.




I found the rod hanger brackets on thingiverse and the spool holders there also.


Zip file for spool holder attached at bottom of page.


...Continue Reading

I’m sick I tell ya.


At the present time I have 15 or so of these in a wide variety of configurations with a few in the Red Bull fuse/mechanics.

Blade 130x Red Bull








I figured I would start this blog as I’ve gone to some lengths in modifying one of my Red Bull’s to accept a higher power out runner as an experiment. Having completed that, I wanted to document my efforts for myself for future reference and for others if they would like to try this or just follow along.


So I’ll start at the beginning. I was born a poor black child....




I disassembled one of these Helis frames to take measurements and to map out what I would need to do to make this work.

I also employed the markup feature on my phone to annotate the pics with some info. These pics show the measurements I took from the inner frame width, depth of the frame from a known location to the motor mounting shelf and also the spacing of the motor mounting bolts in their stock location from a known point.

The inside width I had initially measured as .855 is actually more like .890.











Motor mounting hole location from the back of the elevator servo mounting slot to the motor shaft center line.


...Continue Reading