Recent Attachments for gawlerj
My flying wing project, which will likely suffer a devastating crash. But this is how we learn, right?
Everything back together and with my shiny new FPV setup. Little did I know the Iranians were waiting for me to test fly it and try to capture it too!
My reinforced Landing gear caused the plane to rip in two when I got too low and snagged some of those rocks.
My balsa canopy for my Key Chain Camera.
My first camera I flew with.
And mounted on the plane.
My second canopy to hold my #18 HD Camera and eventually some FPV gear. You can see where a small part of the board used to go across the opening. It careened off during the first flight/crash with this on. :) The platform for the camera is on with superg
Close up of the base of the gear. Epoxy holds everything in. I blocked the metal gear in with a small slice of plyboard since I had to cut the wires to make the gear fit.
This view shows the stand offs I had to make to help mold the board to the curve of the fuselage. Super Glue is holding those cracks together and the gear to the plane. For now.....
Overview of landing gear mod. New heavier metal that I had to cit in order to fit into the plastic sleeve from the original gear.
All RCGroups content copyright © 1996 - 2015 by RCGroups.com.
Terms of Service
Mark Forums Read
Back to Top