Recent Attachments for LizardMan
Without touching/moving any wires, started a second charge cycle (same settings with both channels started together as before). All per cell IR values missing on both channels.
After clearing results of initial charge cycle ran on demand IR tests on both channels. IR values for cells of both channels are displayed Okay
After charge cycle completes IR values remain missing. It appears none of the per cell IR values updated during the entire 42+ minute charge cycle. Pack IR values did update during charge cycle.
Charge cycle complete on both channels. All per cell voltages display Okay. All per cell voltages displayed Okay during charge
IR values missing during charge cycle
Four slot CNC mounting rack
Four DPS-1200FBA PS mounted in CNC cut rack
Discharge at 100mA after low voltage alarm triggered. Starts at 4.88V and runs for 11 hours discharging 1160 mAh, and still hasn't reached 4.6V.
All RCGroups content copyright © 1996 - 2015 by RCGroups.com.
Terms of Service
Mark Forums Read
Back to Top