Recent Attachments for philosophicle_1
please ignore the bar near the bottom, it is just the axis marker that i did not turn off
pic stolen from post #3, this thread
crash damage shown. Can almost see the wingtip curled up for washout (if not broken off) and the TE as thin as I could get it w/o using hardwood. I may try to massage the airfoil a bit more.
Approx 10mm forward sweep, still not sure if this'll work but it looks pretty darn cool in person! Either going to name it "The Attack!" or "The Agressor" painted on the wing. Agressor already in use by someone though. :-(
other angle, heat sink motor mount with epoxy & microballoons. Slight down/right thrust if I recall correctly.
wow, look at that bundle of wire! Lil' bit of crash damage on the wingtip.
"I used the smallest brushless motor i could find and found this one. Its a "Blue wonder - 1100K/V" brushless motor. The shaft i used here is a CP2 main rotor shaft, yup - one of my spares." Quoted from EQMOD.
11x7 w/5.8# of thrust compared to a 13x5.7 w/11.3# of thrust. This is on 4 cells, the motor is recommended for a 12x6 prop right in between what I show.
13x10 w/6.2# of thrust compared to a 14x8 w/8.3# of thrust. This is on 6 cells, the motor is recommended for a 14x10 prop.
Quick Model of a possible Alu. Center Hub...
Just underneath that wire is a spot of solder that looks like it could go there...??
Black wire goes from ??? to channel 4
View from a distance
How's the Air up there?
How it all began
Talk about Compact performance!!! (my 'favorite' photo)
Top's off to you
All RCGroups content copyright © 1996 - 2015 by RCGroups.com.
Terms of Service
Mark Forums Read
Back to Top