Recent Attachments for doz
Carbon caped ribs
living on a sod farm!
The Latest Grand
Third joiner, carbon-caped spar
Note added collar and washer on gear wire.
Carbon joiner and alignment pins. Joiner is removable for trans/storage.
Mounting is easy. Don't know why anyone would want to put a motor inside... do you? Easy service and adjustment this way!
Note alignment pins. I put glued mine into fuse, but would glue into wings instead. (see text)
My starting CG is 7 1/2" forward from motor mount.
Determining CG using MAC.
Lets get weighed!
880 grams on the ole trips. Note cooling holes.
Put tiller in place using forcepts, etc.
Remove wire then use mark to place axle over where you'll drill.
Use square and mark or tape gear wire at verticle up from hood/fuse junction
Gear axle is inserted upside down into bearing block. Place a mark on the gear wire verticle at where hood/fuse seam (junction).Stacked wheels are just holding up the gear wire to horizontal ..
String shows center line on fuse.
Long shot.. cool colors, huh?
This tail group came with kit. I added thunderbolt graphic.
Pod was painted florescent pearl yellow for visibility. It works!
Originally used Airtronics 761 servos and 2200 mah nim battery. (Servos have been removed and are not included with sale)
All RCGroups content copyright © 1996 - 2015 by RCGroups.com.
Terms of Service
Mark Forums Read
Back to Top