Recent Attachments for aussie_flyer
Even had to make a bigger stand for it.
This is how it will look.
Here you can see how I have modified the firewall to clear the muffler. The firewall will be epoxied, pinned and have triangle hard wood in behind, as well as I will put a couple of layers of fibreglass around the joints when it's complete
I am using the LARGE volume muffer, if it doesn't clear the cwol sufficiently, I will chamfer off the corners of the muffler.
The DLE-55 in place
Big hole here, needs to be filled.
There is something exciting seeing the fuselage taking shape in it's skeletal infancy.
Lots of clamps
Starting the undersheeting around the wing saddle
How am I suppose to get those pins out if it is sheeted?
Almost ready to sheet.
Ready to sand the tips to shape.
More shavings, more sanding
Lots of Shavings
All sheeted, ready to cut away the Elevators.
Top is all sheeted, here is the Tail Plane upside down ready to have the bottom skins.
Setting up the tail, all pinned to the building board.
Lot's of wood in there.
It's a BIG box when it arrives
All RCGroups content copyright © 1996 - 2015 by RCGroups.com.
Terms of Service
Mark Forums Read
Back to Top