Can you show us an underneath shot of the V-Tail, the servos and the motor mount, please?

Originally Posted by nickchud

Can you show us an underneath shot of the V-Tail, the servos and the motor mount, please?

http://www.rcgroups.com/forums/showp...5&postcount=93

Originally Posted by samwei1950

http://www.rcgroups.com/forums/showp...5&postcount=93

The extension shaft (CF tube) for the motor is a clever idea (I was wondering how you managed to balance the bird with the motor all the way to the back). Do you experience any vibrations due to unbalances in the shaft/prop ? ... Do you use a bearing at the other end of the shaft (prop side) ?

Sam, how much you charge to make one for me?

Originally Posted by rgt52

The extension shaft (CF tube) for the motor is a clever idea (I was wondering how you managed to balance the bird with the motor all the way to the back). Do you experience any vibrations due to unbalances in the shaft/prop ? ... Do you use a bearing at the other end of the shaft (prop side) ?

Used mini aluminium heli tail tube for the job
vibrations...yes...dued to the old used heli tail tube
regards
Sam

video 2012 11 03 16 53 13 (5 min 56 sec)

build by a friend with ailerons & ruddervator function

http://www.rcgroups.com/forums/showthread.php?t=1731975

K image of the recent flight PX22A








as promise here Video

PX22A Speedactyl (4 min 3 sec)

Speedactyl, your bird is way bigger than I initially thought! That's was some good flying.

I noticed a lot of wing flexing and was wondering if you thought about putting in some carbon fiber to stiffen things up a bit? There are some simple ways you can do that that Lee showed me...but you may know or have in mind what to do. Again, very good flying!

I use BBQ sticks on this one and I didn't put full span only 60% of it on a soft EPP foam ,
Yes originally I did use a Turnigy 2211 2s motor but since the plane is under power I replace it with a 1300KV BlueWonder 3s Motor which is heavier than usual .since its a rush swap , dint reinforce the wings further and it renders my Ailerons completely useless. so far that flexing did create an roll stability advantage and best of all it didn't flutter.


Duking each other out in the Air is fun , not really combat since we dont want to ruin our creations
more so is it looks like a pretty hyperactive bird

design originally is base on an earlier concept which I made for a flight sim

What a big bird
wondering how the guy lift it up
cheers
Sam
20121115_3727c901f383e1e76902dtBpavDskrQh

Its on YouTube...

Originally Posted by bluefalconhollan

Working now on an albatros, EPP wings and fiberglass fuselage. Wing span 2,4m, weight about 1,2kg. It will be a real glider for long flights.

Finally i got the bird on the wing:

Flying the ultimate Albatros (1 min 12 sec)

Originally Posted by bluefalconhollan

Finally i got the bird on the wing:

http://www.youtube.com/watch?v=UJMNjGi-tZ8

Nice bird,great gliding vid
thanks for sharing
regards
Sam

PX22-A Finally got its Livery







Gold single tone streaks,

what do you think?

in contras to its predecessor

Originally Posted by bluefalconhollan

Finally i got the bird on the wing:

http://www.youtube.com/watch?v=UJMNjGi-tZ8

Very nice Robert - but I want to see it doing this:-

Malcolm