HobbyKing.com New Products Flash Sale
Closed Thread
Thread Tools
This thread is privately moderated by Hemikiller, who may elect to delete unwanted replies.
Old Nov 04, 2008, 07:13 AM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
Sold
Large Format plan & 3-view printing $10 for 30 sq/ft


Print your Plans and 3-views - up to 30 sq/ft - $10.00





That's 10 linear feet of plans on 36" paper. don't tile & tape dozens of little sheets when I can print you a professional quality plan at minimal cost. I will also enlarge or reduce any drawing to the size and scale model you desire at no charge. Print jobs over 30sq/ft will have the additional area billed at my normal rate of 40 per sq/ft. Print jobs less than 30 sq/ft are billed at 30 sq/ft.

I guarantee my work 100%. I check all prints for accuracy to scale and print quality. Even if your plans are off scale, I will correct them to your specifications. If for any reason you are unhappy with my prints, you may return them to me for a full refund, including the initial shipping charges. References available by request, or.....

Check my ratings here on RCGroups, or on RCU and eBay

I print and ship within 24hrs of receipt of cleared payment. I accept money orders and Paypal. For quickest service, please use Paypal.

Drawings will be printed on one of my HP Designjet thermal inkjet plotters on 24lb inkjet bond. I can print on up to 54" paper with unlimited length. Buyer to supply me with the digital files of the plan(s) to be printed. Supported file formats are: DXF, DWG, TIFF, JPEG, PDF, GIF and many others.
I do not sell, reproduce or redistribute your files in any way.


Plans will shipped rolled in a tube or folded in a manila envelope, buyer's choice. Shipping costs to be determined at time of sale and are based on final weight of package and actual USPS shipping charges - no handling or packing fees EVER! Typically, one average .60 size plan in a tube via USPS Priority Mail is $4.80 to anywhere in the lower 48 states.


CUSTOM WORK: I can do many forms of custom work to plans; generate ribbed wings, change airfoils, foam wing templates, etc. Alternate forms of media are available, vellum, matte films, etc. Large format scanning is also available up to 36" width.Please email me at plansplotter@yahoo.com or PM me here at RCGRoups.
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Last edited by Hemikiller; Dec 14, 2008 at 07:13 AM.
Sign up now
to remove ads between posts
Old Nov 24, 2008, 01:38 PM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
bumpity-bump
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Old Dec 14, 2008, 07:10 AM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
ttt
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Old Dec 14, 2008, 01:09 PM
My Hangar is full
No Step's Avatar
Everett, Washington
Joined May 2003
3,897 Posts
Trader Rating: 53
I'll have you do some printing this spring. I've done some preliminary drawings now,.. http://www.rcgroups.com/forums/showthread.php?t=960090 ,.... waiting for better documentation to arrive before I go any further. Due to other commitments, I have a period of no building/drawing January thru February. But after that I'll be hot and heavy. It'll be .dwg format, 36 x ~70",... a couple sheets, shipping folded is good for me.

This is a good deal for me. Printing .dwg files locally here is expensive.

Fred
https://home.comcast.net/~guilfoyle72/
No Step is offline Find More Posts by No Step
RCG Plus Member
Latest blog entry: Please visit my Hangar,.....
Old Dec 14, 2008, 01:25 PM
Dragons, Windmills. All Same.
jcstalls's Avatar
United States, IN, Indianapolis
Joined May 2002
3,405 Posts
Trader Rating: 379
Hi,

Can you do from a *.PLT file from Autocad I believe?
2' x 4' but will have to look it up again.

If so, I would like a couple please.

Jared
jcstalls is offline Find More Posts by jcstalls
RCG Plus Member
Old Dec 14, 2008, 02:22 PM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
Fred: Whenever you're ready, just drop me an email at plansplotter@yahoo.com

Jared: Yes, I can print from *.PLT files. I can print you as many as you need & PM sent
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Old Dec 14, 2008, 02:29 PM
My Hangar is full
No Step's Avatar
Everett, Washington
Joined May 2003
3,897 Posts
Trader Rating: 53
Come to think of it, I may have you print out a sheet just for size check so I can get an idea what this things going to look like,.. then I can comfortably go on drawing knowing what I'm dealing with. Look for an email with a .dwg attachment sent to plansplotter@yahoo.com

Fred Guilfoyle
No Step is offline Find More Posts by No Step
RCG Plus Member
Latest blog entry: Please visit my Hangar,.....
Old Dec 14, 2008, 02:32 PM
Angering mobs since 1980.
Twmaster's Avatar
United States, TX, Dallas
Joined Sep 2001
2,929 Posts
Trader Rating: 333
Sweet! I'm glad to see this service offered. I'll be in touch later this winter!

Thread subscribed to.

Do you ship rolled or folded?

--
Mike N
Twmaster is offline Find More Posts by Twmaster
Old Dec 14, 2008, 03:57 PM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
Fred: got the file, I'll send you a quote in a few.

Mike: I ship either way, whichever your prefer. Folded is cheaper as they can go First Class. Since your only a couple zones away from me, Priority is fairly inexpensive, even for multiple sets of plans. A two pound tube would only be $5.05. It only gets expensive when I'm shipping to California.
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Old Dec 14, 2008, 04:00 PM
Angering mobs since 1980.
Twmaster's Avatar
United States, TX, Dallas
Joined Sep 2001
2,929 Posts
Trader Rating: 333
Hemi: That's perfect. You will have a new customer. (Me!)

--
Mike N
Twmaster is offline Find More Posts by Twmaster
Old Dec 14, 2008, 06:03 PM
Dragons, Windmills. All Same.
jcstalls's Avatar
United States, IN, Indianapolis
Joined May 2002
3,405 Posts
Trader Rating: 379
Hi,

Sounds great.

Just sent an email to your provide addie in post #1 w/ request from.

one or two, folding and first class to , "California"

Thank you,

No rush, just another project I am entertaining and hope to fully complete with trimming pre 10/2009

Jared
jcstalls is offline Find More Posts by jcstalls
RCG Plus Member
Old Dec 19, 2008, 02:08 PM
Dragons, Windmills. All Same.
jcstalls's Avatar
United States, IN, Indianapolis
Joined May 2002
3,405 Posts
Trader Rating: 379
Hi,
Got mine today, two prints, all legal.

Prints look Fantastic and service you provide has no equal that I know of.

Thank you so much, and will remember this in the future.

Jared
jcstalls is offline Find More Posts by jcstalls
RCG Plus Member
Old Dec 19, 2008, 02:26 PM
My Hangar is full
No Step's Avatar
Everett, Washington
Joined May 2003
3,897 Posts
Trader Rating: 53
I've got orders in for printing 3 different .dwg CAD drawings of models I've drawn up recently (5 large sheets). I'm glad you are happy with the work. This is exactly the service I needed. Good idea HemiKiller.
No Step is offline Find More Posts by No Step
RCG Plus Member
Latest blog entry: Please visit my Hangar,.....
Old Dec 19, 2008, 02:41 PM
Dragons, Windmills. All Same.
jcstalls's Avatar
United States, IN, Indianapolis
Joined May 2002
3,405 Posts
Trader Rating: 379
And, mine was from a *.plt file.

Most places I asked around did not even know what that was!

I ordered and paid for folded as I will not be building the full ship right off the plans sans the elevator and rudder.

Jared
jcstalls is offline Find More Posts by jcstalls
RCG Plus Member
Old Dec 20, 2008, 08:02 AM
-insert witty saying here-
Hemikiller's Avatar
United States, CT, Killingworth
Joined Dec 2005
1,657 Posts
Trader Rating: 225
Jared, Thanks for the props, I strive for the best quality prints possible. BTW, I can't believe you received them already. USPS really was really on the ball for that packet, three days from my hand to your mailbox, unbelievable.

Fred, If USPS would ever decide to deliver your MO, I could get yours out. Funny how letters take so long, yet a packet of plans gets from CT to WA in three days....
Hemikiller is offline Find More Posts by Hemikiller
RCG Plus Member
Closed Thread

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Large format plan printing Hemikiller Aircraft - General - Miscellaneous (FS/W) 0 Sep 28, 2008 08:47 PM
Discussion Plan/3-view search... Impact Electric Plane Talk 6 Sep 23, 2007 08:28 AM
Need plan or good 3-view of Vickers Wellesley The Wanderer Foamies (Kits) 13 Jan 24, 2006 07:08 AM
IRL car 3 view plan or drawing? superdave42 On-road Cars 0 Jun 15, 2005 03:06 PM
looking for 3-view or plan for F6F hellcat rcminiman Scale Kit/Scratch Built 2 Mar 28, 2005 05:26 AM