HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Feb 17, 2003, 04:53 PM
Registered User
Brazil (State Săo Paulo, City Botucatu)
Joined Feb 2003
31 Posts
Finaly...the firmware youŽll need for the MC68HC711E9CFN2 in the SUPERTEF 96

Hi men!

I finaly found the firmware for the MC68HC711E9CFN2...i emailed the correct author about the microcontroller firmware, and i received it:

"You can find in my page, french version, "INFOS" then "TELECHARGEMENTS", the
hex file necessary for 711E9 programmation.
For the job I use PCBUG program, you can find on the web"

The firmware is in

http://home.nordnet.fr/~fthobois/download.htm ...just click the link SUPERTEF (unless you want the firwares for the other projects, cause if you donŽt know the prefixes RX before the projects means that it is a receiver)
And abou the PCBUG, the best way to get it free is the site http://www.mrrobot.com/downloads.html#SOFTWARE ...

However MC-RAM told me the cheapest way of programming the microcontroller is in Motorola S-file Programming Instructions is inMotorola S-File Programming Instructuions .

I Hope i could help all you that want to build the SUPERTEF. IŽll need to go to other city next wednesday, and i donŽt know when iŽll write again...Good luck for all you, BYE
neophyte is offline Find More Posts by neophyte
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion How do you Cut Slots for Spars in Foam? FlyingW The Builders Workshop 9 Nov 21, 2006 02:23 PM
How many years into the future do you see a need for airline pilots? Ben C Life, The Universe, and Politics 25 Dec 04, 2004 12:24 AM
Getting out of RC sale. BL Motor, Stampede, Tx/Rx, Chargers. You'll need Something! alanhsu Cars - Cars and Parts (FS/W) 2 Jul 06, 2004 09:19 AM