Great job Pope, sound like a Great plane in Fighting Trim
I like the idea of putting the wing alignment pins in the fuse as well!
Any chance you can post what you put inside, receiver, servos, lead, etc...
I'm a flat land, flier and would be interested in the all up weight, ready to fly...
Whacker

I will post some pic's soon, currenty I am traveling the south island of NZ but will take some pics when I have the condor out of the box.

Well finally here's the link for the video of the condor http://www.rcgroups.com/forums/showt...5#post10768919

I had to keep the res. down to keep the size down. Also the comment on over rudder control is actually aileron coupled with rudder as a drop tip turn, only at low speed as you can see.

cheers
dave.

I have listed some pic's of the radio installation. I am running Y leads for my flaps and ailerons, if you had enough mixes you could run them on their own channell. The wing servo covers are not the ones that come with the kit, these I used with the servo's from another aircraft.

The all up weight of my Condor is 2.62 kgs but she has lots of wing.

I got in the Condor from Aero Fever but they left out the small parts
bag with the horns, linkage stoppers, screws, washers,
wire, hardwood pieces etc.

Haven't got any response after emailing Albert several times and even posting in their Support Forum

Has anyone had any luck with Aero Fever Support?

Or should I not bother getting after them for the missing parts
and just try to pick them up at the Local Hobby Store...

Bruce

Hi Bruce,
I have had a lot of problems getting a reply from albert as well, I emailed maybe 8 times with no response. It is a shame that he has the best pricing for the models.

to sort your problem contact Ricky from flyfly email to http://www.flyflyhobby.com/english/index.html

They are the manufactures and he will be only too happy to help out.

regards
Dave.

Sorry the email link for Ricky is on the flyfly web site listed above.

dave

Thanks Dave

Great build thread -looking forward to getting this
thing flying

Bruce

I did finally hear from Albert at Aero Fever and he's shipping
me the missing parts.

Thanks Albert

Hey could anyone recommend a motor and esc set up for the condor? Could i run two 2000mah 3cell 25c in parallel? they might not be strong enough i know but i am trying not to buy more batteries if i can help it!Thanks

I pushed the button last night and ordered up mine. I asked Albert a question on the order, and he replied within a few minutes. Considering it was the middle of the night here in the US I was surprised by the quick response.

Looking forward to getting this plane going. Now I just need to upgrade my radio as my Spectrum took a hit today and killed one of my favorite little park fliers. (Luckily it didn't take out one of my more expensive planes.) Was the first kill since going Spectrum, but not the first time I have dropped into fail safe while flying. May have been an issue with the speed controls ESC.. Hard to say, but the condor will require more mixxing, so time to upgrade. This plane is getting spendy.

-Wayne

I hate waiting for a new toy to arrive!

Hopefully the Condor is on the way.. My new radio did arrive today, so reading up on it. Also been selecting my gear, but don't want to place my orders until the plane arrives so I can confirm some measurements. Would be great if I had this ready for Xmas.

-Wayne

See if you can get a tracking number from albert, that should help.

Originally Posted by pope

See if you can get a tracking number from albert, that should help.

Finally got a track number today. Looks like they just processed the order as it is not yet showing any tracking info. That's fine, I had asked them to go through the kit to make sure it was in good health and everything was there, so hopefully that was done.

-Wayne

lets hope you get it by xmas.