|Oct 03, 2008, 08:29 PM|
Kyosho Flip 3D - LPU Only, Northern Virginia
Kyosho Flip 3D ARF - USED - $70 ***SOLD!!!***
I just don't fly the glow planes as much anymore... I'm running almost all electric these days, and I just don't fly this one enough to keep it around. It is in good condition, but it's not perfect. It's absolutely flyable (I flew it recently), but I've just to thin the fleet.
This is a real light-flying 3D plane, and has huge control surfaces. I powered it with an OS .46FX, and I had hover and pull-out power, but a .55AX would definitely be an upgrade! All servos were Futaba, and the fuse side has a small hole for a standard switch assembly. The cowl is cut to fit the .46FX tightly, and is very well done. The wheel pants were useless and literally broke off on the third flight. Not worth the hassle, but I still have them if you want them.
I did have one mishap with this plane, and it cracked the turtledeck sheeting and upper longeron. These were repaired, and the plane has been flown numerous times since then with no problems. The blue checkerboard covering was what I used to replace the hole I had to cut to fix the cracks.
This is for local pick-up only. It's too big to ship, and would be cost prohibitive. I'd rather make this a "cheap" buy for a local flyer than go through the hassles of shipping, so please don't ask.
Payment can be cash or PayPal (credit cards, etc are OK). Of course, I prefer cash.
Please post a reply in this thread before sending PMs, and let me know if there are any questions!
Last edited by N925WB; Oct 06, 2008 at 08:28 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Kyosho Flip 3D, Re-birth||RMihara||Sport Planes||78||Nov 04, 2004 12:05 PM|
|Kyosho Flip 3D and engine choices||Arthur_GA||Fuel Plane Talk||2||Feb 17, 2004 08:42 PM|
|Kyosho Flip 3D???||Paul Susbauer||Sport Planes||10||May 23, 2003 10:37 AM|