HorizonHobby.com Shop our Airplanes Products Shop our Surface Products
Thread Tools
This thread is privately moderated by DMA, IN, who may elect to delete unwanted replies.
Old Jun 06, 2008, 05:04 AM
DMA, IN is offline
Find More Posts by DMA, IN
Trader Rating: 25
Registered User
La Porte, IN
Joined Nov 2007
207 Posts
Trader Rating: 25
Sold
Turnigy Aerodrive 6364-230

I have for sale a Turnigy 6364-230KV motor that I got for a large scale project that has been sold off. This is a large outrunner! I bought it new and spun it up a couple times on the test stand and it has sat since. These specs are from their page:

Model: C63-64-B
Input Voltage : max. 37V (10S Li-po)
Kv : 230 rpm/V within 10%
Internal Resistance : 28 mohm
No Load current @ 7V: 2.16A
Dimensions : 63mm X 64mm / 2.48in X 2.52in
Shaft diameter : 10mm / 0.39in
Weight with cables : 640g / 22.58oz
Number of poles/magnets : 14
Recommended model weight : 6000~10000g / 176~352oz
Power equivalent : .90 - 150 Glow engine
Prop: 14x10~18x12 (lipo from 6 to 8 cells)
ESC Required: 60A Minimum
Watts: 1900W

Use this motor with 3-8 cell Li-Poly packs and 19-20 inch props on planes up to 20 lbs flying weight.

Similar to AXI Gold 5330/18, AXi Gold 5330/24, E-Flite Power 160. Roughly equivalent to 1.2-1.5 2-stroke or 2.1-2.5 4-stroke glow engines.


Asking price is $70 which is what they cost new but I am including the matching stand off mount and a XOAR 18-8 prop.

Thanks for looking!

Darren
DMA, IN is offline Find More Posts by DMA, IN
Sign up now
to remove ads between posts
Old Jun 08, 2008, 07:04 PM
muskis2 is offline
Find More Posts by muskis2
Trader Rating: 30
I crash there for I am...
muskis2's Avatar
Colorado, not enough oxygen
Joined Jul 2006
304 Posts
Trader Rating: 30
still got it?
muskis2 is offline Find More Posts by muskis2
Old Jun 09, 2008, 03:37 PM
DMA, IN is offline
Find More Posts by DMA, IN
Trader Rating: 25
Registered User
La Porte, IN
Joined Nov 2007
207 Posts
Trader Rating: 25
sold pending payment
DMA, IN is offline Find More Posts by DMA, IN

Thread Tools