Originally Posted by ssstraub

I have one of these cams on order and would be very interested in pics of this mod (especially up close on the circuit board) as I'd much rather use the RX than AAA's. Or if there is a link showing this...That'd be good too.

Buy this & just plug it in...RTR http://www.rcplanecams.com/camcart/i...f4d3afde0a7e84 Buy this & just plug it in...RTR

Actually it works now. I dont know but i reversed the ch3 slot and it works. Before it didnt do a thing. Im not sure but my ESc beeped a few times then went into a long beep and stopped but it was at the bottom so when it stopped i throttled up and eurerka!! Thanks for all you help guys. Now i just need to get her put back togther. The only thing is that the motor sounds like crap. It sounds like theres sand or something in it.....idk ill see what i put the prop on it.

Originally Posted by lxelementxl

Ive tried that but it doesnt seem to work. Ive switched all 4 nobbs on the back in the battery compartment and nothing changed

Probably time to move your q&a session to the radio forum, hope for someone there who has dealt with this radio already.
Aircraft - General | Radios

Originally Posted by wrightme

Probably time to move your q&a session to the radio forum, hope for someone there who has dealt with this radio already.
Aircraft - General | Radios

Read the post above you lol.

Originally Posted by realtimerecon

Buy this & just plug it in...RTR http://www.rcplanecams.com/camcart/i...f4d3afde0a7e84 Buy this & just plug it in...RTR

But in order to buy that, you also have to buy the modified Aiptek 1.3mp camera for $75. Which is a rip off when you can buy that same camera for what.... 20 bucks? And it is a very easy modification to power it off of your Rx.

Word to the wise....Dont drop that 1.3.....I had it on HUNDREDS of flights w/NO problems at ALL.Then 1 day in a rush, i dropped it..........End of cam...RTR

Originally Posted by realtimerecon

Word to the wise....Dont drop that 1.3.....I had it on HUNDREDS of flights w/NO problems at ALL.Then 1 day in a rush, i dropped it..........End of cam...RTR

What happened? Did the outer case just break or what?

She's in a bad mood ! Dosen't like hanging around the house....

Originally Posted by lxelementxl

Ok well i got them to fit just needed a little persuasion =). But now i have a delama. When i moved the switchas around to try to get throttle it works on the 3rd set. So i have the left sitck down like it should be for no power and the motor went to full speed. I have the servos working on the right stick fine but the motor is wrong. its like the opposite. When i would have to throttle up i pull the stick down and to get it to stop the stick would be all the way up. What should i do now?

Are you sure you have the leads plugged in the right direction?

Originally Posted by raz

What happened? Did the outer case just break or what?

No,looks fine.Something inside...RTR

Originally Posted by CrashnBurn

Here y'll are at RTR's request, A place to post your photos and videos of your Super Cub. I would imagine this would be a good place to discuss equipment how it's mounted where you got it for how much Have at it and I'll try to set this first page up as a library of important stuff to know like HOW'S HE DO DAT? I WANT TO SEE AT LEAST 2 PAGES OF POSTS BY TOMORROE EVENING. POUND THOSE KEYS people.
http://www.rcgroups.com/forums/showthread.php?t=839532
Thought the Dawn Patrol would look good on a photo page, If someone has a better one send it to me.
Y'll enjoy now ya hear or I'll have to get after ya whippersnapers.
Gabby

I'm confused Gabby, that links seems to go to a closed thread started in Marsh?

Originally Posted by realtimerecon

She's in a bad mood ! Dosen't like hanging around the house....

What's that 3 blade prop do for you RTR?

Jim

Originally Posted by cloud-9

I'm confused Gabby, that links seems to go to a closed thread started in Marsh?

I saw that too. What's up Gabby?

It stops the S.C. from being a weed wacker.

Originally Posted by realtimerecon

It stops the S.C. from being a weed wacker.

You are supposed to do your hovering tail-down, not nose-down!

Unless you are flying a heli or a vari-pitch on your SC, of course.