ok , here is big shopping day.

.1 servo, ult micro 3g $31.00 each so i bought 2 (BMS-303 MADE IN TAIWAN)
.2 esc XC1210BA DUALSKY (12A, 5-10NC/2-3 LIPO W/BEC) 39.95$

.3 Battery (EVO LITE) 800 mAh 3s 11.1v lipo 18C 14.4 amp continuous 28C 22.4 amp max bursts 70g 45$


for receiver link for receiver
http://www.sloughrc.com/asp/default...temid=JRC77RS35

do you think i need to change receiver also ?

pls let me know if all above ok, or do i need to retrun some thing.

in my last build i use fuselage of 6mm do u think that should be also 3mm?


Cheers
AQEEL

That should all work fine, The receiver should work fine as well.. make it from 3mm, no need to do 6mm unless you just want to.

thank you very much for your help i have cut the parts and hopefully today i will join them. and hopefully this sunday may be i get chance to fly that. do you know any link for easy build plan like this with ducted fan?

i will post my images in next post once again thanks and i hope one day i will fly that planes....



cheers
aqeel

Here is mine. 6mm for vertical part and bottom of the fuse, 3mm the rest.
Bamboo sgewers for spar and fuse reinforcement.
Motor and CC from HC as directed. Servos D47. Pushrods - alu rod.
3 cell 520 for batery.
I build it from the start with ailerons so I ahve no idea how it flies w/o them.
ADAM! THIS THINGS FLIES LIKE DREAM! ROLLS ARE FASTER THAN YOU CAN COUNT AND VERY AXIAL, THE LOOPS - LIKE 3 FEET DIA...ONE BY ONE ...ENDLESLY, VERY MUCH FUN TO TRY TO HOVER IT!
One can yank and bank this thing around with impunity. Very controlable in any speed...
The Best for New Year for you, Adam and for all others jet jokeys!
Cheers,
Janusz

did you fly it ?

aqk...2002 can you read capital letters?...:-)

IM so glad you guys are enjoying this simple yet very capible model, happy new year to all!

Happy New year everyone. Hoping the New Year brings all of you a very happy flying season.

Hi adbradley !

1st of all Happy new Year , here is my build pic, i was having problem while mounting the motor because prop size is bigger then the size we have in form, what i did is to move motor little up, let me know if that seems to be ok

and i hope you all will help me till i fly it....

you are going to have a major problem with the plane being tail heavy, need to have the servos and esc as far forward as you can, and as far as the prop goes, id chose a smaller one. having the motor mounted that high may cause you some problems as well.

ADam

Ok! i am already using 5*2.5 prop so what size you recommend? and for tail , i am going to fly this plan with 3cell

please note red spot where i will put the 3CELL battery. i have to modify it if you recommed it, i think i am unable to move servo which is 3g each is that possible if i can move up esc and if you can point me where to ?

cheers

aqk you will have to put your battery in the area you indicated to achieve the proper balance. I use a smaller battery (2 cell 500-mah or 650 mah 2 cell) and it balances right where you indicated. The reason I had to shove the battery so far forward (like you're doing) is because I'm using a 19 gram HC 2500KV motor. I also use a 5X3 prop and get great performance. As a matter of fact, I fly it at about 1/4 throttle indoors. Any more throttle than that causes me to eat up airspace too quickly. It high alfas great too with the setup I'm using. Hope this helps. Marty

Here's a couple of pictures of my F22. I have since added some insignias to the plane. Marty

thanks marty, and what about my motor which i move little up, this is because when i put in middle my prop tuch with forms?

my motor specification is

Shaft diameter: 3mm
Dimension : 18mm x 10mm
Recommended Propeller: 5x3
Weight: 24g
Kv: 2500rpm/V
Max Currect: 12A
Max efficiency: 89%
Max. Continuous Current: 0.8-12A
Screws & Parts are inclued
5x3 Propeller x 1

What do you Guys use for attaching and keeping the latch closed? I use a simple strip of clear tape for the hinge at the front and packing tape in the center rear that is stuck to the body to keep the hatch closed. I'm still not happy with the setup. Any suggestions Boys? Marty