GWS-J10, the EDF jet model of the Chinese J-10 fighter - Page 3

skyhawk · Dec 25, 2007, 04:38 AM

And how many amps it's drawing?

GWS4CEO · Dec 25, 2007, 08:12 AM

Quote:

Originally Posted by ParkJeff

Mr Lin,

Could we have more info on your 2815 RED motor? Kv, weight as well as no. of poles?

Thanks.

Jeff

4100Kv.

77g weight. 4 poles.

41.4 Amps @11.1V got 768~790g thrust.

chewytm · Dec 25, 2007, 10:35 AM

Mr Lin,

Can the 2815 be run on 4S? What ESC do I need? Will it kill the motor?

chewy

GWS4CEO · Dec 25, 2007, 11:00 AM

Quote:

Originally Posted by chewytm

Mr Lin,

Can the 2815 be run on 4S? What ESC do I need? Will it kill the motor?

chewy

Absolutely not for 4S!!!

You can kill motor very quick and smell the smoke for free!

chewytm · Dec 25, 2007, 11:06 AM

MR Lin, No price was mentioned on the EB email or at the start of this thread. Only mentioned the EMS postage. A couple of post before this, you mentioned USD60. Is that it?

Btw, Merry Christmas, and we do thank you for subsidising the postage.

Too bad the motor won't take 4s as 3s won't give better than 1:1 thrust:weight ratio. Any suggestion?

chewy

crxmanpat · Dec 25, 2007, 03:17 PM

chewy,

I already have my proforma invoice from Andy, and the NPS kit is US$60 (also mentioned in Andy's email in the "Christmas Gift" portion). I'm not sure what the powered kit cost is, but I suspect somewhere around US$100.

Pat

GWS CHEN · Dec 25, 2007, 09:14 PM

Pat,

You got it ! You're right.

chewy,

Be sure to reply to Andy as EARLIER as you could if you'd like to order the EB J-10.

Chen

GWS4CEO · Dec 25, 2007, 10:38 PM

Quote:

Originally Posted by GWS4CEO

No extra discount on EMS postage for J-10, since no one feel need to say thanks and appreciate to GWS, yet we had too much complains during A4 run on EB.

But this time every J-10 EB will get a free 2815 motor! Pay $60 for NPS only.

However, you can feel free to make choice: "I don't need your free motor!"

First 50 kits with this offer only who paying the EB invoce, first come first serve.

You pay full amount of the EMS postage what GWS paid for your case. ( But this will be 40% off from the China govenrment rate, since GWS constant high volume with EMS office )

The postage will be different that depend on where you live.

GWS4CEO · Dec 25, 2007, 10:41 PM

Quote:

Originally Posted by GWS4CEO

4100Kv.

77g weight. 4 poles.

41.4 Amps @11.1V got 768~790g thrust.

So, we like suggest you to use an ESC must with higher than 45A rating @ 11.1V.

Blaze.45 · Dec 26, 2007, 12:07 AM

Oh man

.

I'm sitting here rolling my eyes as I fill out the ordering forms.
I'm pissed (that means "angry" here in the US

) that I can't stop myself from ordering this one on EB.

$50 shipping is yet a new high. Although it's too pretty not to.

-Chris

ParkJeff · Dec 26, 2007, 01:10 AM

Quote:

Originally Posted by GWS4CEO

4100Kv.

77g weight. 4 poles.

41.4 Amps @11.1V got 768~790g thrust.

That is excellent. Sounds like it'll be good for both the EDF75 and also the smaller S400 size 64/66mm fans. Hope you'll be selling them standalone as well.

The J-10 looks really nice. I'll have to get my dealer to bring one in for me.

Jeff

kensp · Dec 26, 2007, 01:38 AM

Quote:

Originally Posted by ParkJeff

That is excellent. Sounds like it'll be good for both the EDF75 and also the smaller S400 size 64/66mm fans. Hope you'll be selling them standalone as well.

The J-10 looks really nice. I'll have to get my dealer to bring one in for me.

Jeff

Jeff

Get an Early Bird Kit.The EMS Postage is expensive but you will gt the model very much earlier and the total cost will be about AUD$ 120. Plus if you are in the first 50 to order an Early Bird J-10 you will get the motor free.

Ken

ParkJeff · Dec 26, 2007, 04:04 AM

G'day Ken,

You make a good point but I'm a slow builder and have 2 more in the queue. The J-10 looks really tempting though. I'll have to toss a coin.

Hope you had a great X'mas and Happy 2008!

Cheers,
Jeff

GWS4CEO · Dec 26, 2007, 05:14 AM

Quote:

Originally Posted by ParkJeff

G'day Ken,

You make a good point but I'm a slow builder and have 2 more in the queue. The J-10 looks really tempting though. I'll have to toss a coin.

Hope you had a great X'mas and Happy 2008!

Cheers,
Jeff

What's your coin said?

kensp · Dec 26, 2007, 05:48 AM

Quote:

Originally Posted by ParkJeff

G'day Ken,

Hope you had a great X'mas and Happy 2008!

Cheers,
Jeff

I return your well wishes.

Christmas Day was great because I set up a Skype video link to my daughter and grand daughter in Adelaide.

Ken

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion GWS 262 EDF Jet	GWS4CEO	Foamy EDFs	14	Aug 03, 2008 09:28 AM
Cool Chinese J-10(Depron foam) picture & video	aero-dreamworks	Parkflyers	12	Aug 02, 2008 08:48 AM
Discussion Chinese J-10	aero-dreamworks	Pusher Prop Jet Models	17	Jan 03, 2008 07:07 AM
Sold Good old Vet GWS A-10 twin EDF jet fighter bomber with 2 servos	shschon	Aircraft - Electric - Jets (FS/W)	3	Nov 24, 2006 03:26 PM
New to EDF - Opinions please! Best handlaunch parkflyer sized EDF jet model	StahlmanGC	Electric Ducted Fan Jet Talk	7	Aug 19, 2004 08:21 PM

Dec 25, 2007, 04:38 AM	#31
skyhawk A-4 nut!! Join Date: Apr 2002 Location: Vancouver B.C. Posts: 3,826	And how many amps it's drawing?

Dec 25, 2007, 10:35 AM	#33
chewytm Registered User Join Date: Jul 2006 Location: Ipoh, Perak Malaysia Posts: 2,264	Mr Lin, Can the 2815 be run on 4S? What ESC do I need? Will it kill the motor? chewy

Dec 25, 2007, 11:06 AM	#35
chewytm Registered User Join Date: Jul 2006 Location: Ipoh, Perak Malaysia Posts: 2,264	MR Lin, No price was mentioned on the EB email or at the start of this thread. Only mentioned the EMS postage. A couple of post before this, you mentioned USD60. Is that it? Btw, Merry Christmas, and we do thank you for subsidising the postage. Too bad the motor won't take 4s as 3s won't give better than 1:1 thrust:weight ratio. Any suggestion? chewy

Dec 25, 2007, 03:17 PM	#36
crxmanpat TEAM EJF MINION Join Date: Jan 2006 Location: Mesa, AZ Posts: 9,411	chewy, I already have my proforma invoice from Andy, and the NPS kit is US$60 (also mentioned in Andy's email in the "Christmas Gift" portion). I'm not sure what the powered kit cost is, but I suspect somewhere around US$100. Pat

Dec 25, 2007, 09:14 PM	#37
GWS CHEN Registered User Join Date: Oct 2005 Location: Taiwan Posts: 3,844	Pat, You got it ! You're right. chewy, Be sure to reply to Andy as EARLIER as you could if you'd like to order the EB J-10. Chen

Dec 26, 2007, 12:07 AM	#40
Blaze.45 Seeing the Farside. Join Date: Aug 2005 Location: Seattle WA, USA Posts: 4,085	Oh man . I'm sitting here rolling my eyes as I fill out the ordering forms. I'm pissed (that means "angry" here in the US ) that I can't stop myself from ordering this one on EB. $50 shipping is yet a new high. Although it's too pretty not to. -Chris

Dec 26, 2007, 04:04 AM	#43
ParkJeff Who moved the runway? Join Date: Feb 2003 Location: Australasia Posts: 706	G'day Ken, You make a good point but I'm a slow builder and have 2 more in the queue. The J-10 looks really tempting though. I'll have to toss a coin. Hope you had a great X'mas and Happy 2008! Cheers, Jeff