Announcing the eLogger V3! - Page 5

dhares · Nov 22, 2007, 11:28 AM

Mine came yesterday too. It's cold (24 f) and windy here, but I stuck it in my SuperVee and went to the pond this morning. Works great, but I noticed my packs don't get as hot as I expected. Wonder why? Maybe if I hold 'em I'll warm up. Geat job Bill. Now if only the Lions do as well against the Packers.

diver don · Nov 30, 2007, 01:40 AM

Any word when Tower is going to get their shipment?

DD

billpa · Nov 30, 2007, 02:27 AM

Hi All,

Dave, thanks for the kind words!

Don, we are scheduled to receive the first large production run this coming week, which means that Tower should receive units the week following. Just in time for Christmas. :-)

Regards,

Bill, for Eagle Tree

diver don · Nov 30, 2007, 03:40 PM

Ho, Ho, Ho,

Thanks Bill

I'm working on the TF B-25 and want to use the duel RPM feature.

Don

dhares · Dec 01, 2007, 10:44 PM

I'm not shilling for Bill, but...

Whenever I've had a twin, I've been unhappy with the micropower units (unless I use two). I always want more data than I can otherwise get. Both RPM, both motor currents (electric), both exhaust temps (gas), etc. Plus all the servo stuff. If I had a spektrum radio, I'd want that data too. So I use the full size FDR for twins. My 2 cents

Truglodite · Dec 03, 2007, 04:34 PM

bill, i just got my v3 & have 3 quick questions for you:

1) under "advanced hardware options", there is a checkbox for "i want high resolution rpm". what is that for? i tried it & get invalid data with my brushless sensor

2) under "advanced hardware options", there are checkboxes for "low temp option". what are they used for? fyi, i have the micro temp sensor (250Fmax).

3) does the rpm logged from a brushless sensor change depending on the # of poles entered, or is the software interpreting generic data based on the number of poles entered? ie: if the logged data is generic, then the number of poles only needs to be set correctly when displaying the rpm data.

thanks in advance,
kev

wazzer · Dec 03, 2007, 10:04 PM

Subscribed

billpa · Dec 04, 2007, 11:53 PM

Hi Truglodite,

Thanks for your purchase. Those particular advanced options are not are not supported/tested options with your equipment. We generally use that "advanced" page for custom projects. The 'low temp' option is used to measure temperatures down to about -150 degrees. Don't ask me why. :-)

Correct, the logged RPM data is generic, except that the powerpanel will display incorrect data if the # poles is not set correctly when the data are captured.

Regards,

Bill, for Eagle Tree

diver don · Dec 12, 2007, 12:37 PM

Bill,

Thought I'd be a pain in the rear and ask if you received your shipment yesterday as expected?

As you know I'm waiting for one from Tower.

Thanks,

Don

billpa · Dec 13, 2007, 01:19 AM

HI All,

Yes! We are shipping starting Thursday. Thanks for your patience!

Regards,

Bill, for Eagle Tree

Socomon · Dec 13, 2007, 10:05 AM

Quote:

Originally Posted by billpa

Hi All,

Sorry for the delayed reply.

The internal resolution of the V3 is approximately 0.05A and 0.02V. There are also several enhancements to attain better accuracy and maintain it over time.

Regarding upgrade, the most important thing to us is to have happy customers. Based on your feedback, we've decided to offer a V1/2 to V3 upgrade rebate of $10. This is about a 15% discount for customers who continue to support us. And you get to keep the V1/V2!

To take advantage of this rebate, purchase your V3 from any authorized dealer or direct from us. Within 30 days of receiving the V3, mail in a copy of your V3 and V1/V2 purchase receipts, and we will mail you (or paypal you at your option) the $10 rebate. Rebate requests should go to:

Eagle Tree Systems, LLC
ATTN: V3 Rebate
4957 Lakemont Blvd. SE,
Suite C-4, PMB 235
Bellevue, WA 98006

Regards,

Bill, for Eagle Tree

Bill:

I ordered my v3 today from Tower. I want to make sure I understand your directions above, do you want me to wait until Tower ships me the V3 before submitting the paperwork. I hope Tower gets the V3 with wire leads sooner than later. Also - can you accept via e-mail or snail mail only?

Steve

diver don · Dec 13, 2007, 11:04 AM

Quote:

Originally Posted by billpa

HI All,

Yes! We are shipping starting Thursday. Thanks for your patience!

Regards,

Bill, for Eagle Tree

Thanks Bill,

Have a good Christmas!

Don Blatchley
Goldsboro, NC

mabunixda · Dec 14, 2007, 04:10 AM

I ordered my v3 Logger on 12th - now the logger is back on backorder ... is there a possibility on the website to track my order?

I tried to contact Bill by mail - but i do not know if my mail server is still having problems or Bill didnt answer

billpa · Dec 14, 2007, 03:13 PM

Hi All,

All eLogger V3 orders received on or before Wednesday, December 12th either have shipped or will ship today or Monday. Orders after Wednesday the 12th are backordered, shipping approximately 5 January.

Merry Christmas!

Regards,

Bill, for Eagle Tree

diver don · Dec 20, 2007, 01:33 PM

Notfied by Tower that mine is preparing to ship.

Guess there is a Santa.

Thanks guys and have a Merry Christmas!

Don Blatchley
Goldsboro, NC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Announcing the MicroPower e-flight recorder from Eagle Tree - ONLY $69.99	billpa	Product Announcements	112	Feb 06, 2007 12:07 PM

Nov 22, 2007, 11:28 AM	#61
dhares Registered User Join Date: Jul 2006 Location: Saline, MI Posts: 57	Mine came yesterday too. It's cold (24 f) and windy here, but I stuck it in my SuperVee and went to the pond this morning. Works great, but I noticed my packs don't get as hot as I expected. Wonder why? Maybe if I hold 'em I'll warm up. Geat job Bill. Now if only the Lions do as well against the Packers.

Nov 30, 2007, 01:40 AM	#62
diver don "Each Day Is A Lesson" Join Date: May 2004 Location: Goldsboro, NC Posts: 2,426	Any word when Tower is going to get their shipment? DD

Nov 30, 2007, 02:27 AM	#63
billpa Registered User Join Date: Nov 2003 Posts: 1,595	Hi All, Dave, thanks for the kind words! Don, we are scheduled to receive the first large production run this coming week, which means that Tower should receive units the week following. Just in time for Christmas. :-) Regards, Bill, for Eagle Tree

Nov 30, 2007, 03:40 PM	#64
diver don "Each Day Is A Lesson" Join Date: May 2004 Location: Goldsboro, NC Posts: 2,426	Ho, Ho, Ho, Thanks Bill I'm working on the TF B-25 and want to use the duel RPM feature. Don

Dec 01, 2007, 10:44 PM	#65
dhares Registered User Join Date: Jul 2006 Location: Saline, MI Posts: 57	I'm not shilling for Bill, but... Whenever I've had a twin, I've been unhappy with the micropower units (unless I use two). I always want more data than I can otherwise get. Both RPM, both motor currents (electric), both exhaust temps (gas), etc. Plus all the servo stuff. If I had a spektrum radio, I'd want that data too. So I use the full size FDR for twins. My 2 cents

Dec 03, 2007, 04:34 PM	#66
Truglodite D---==-O Join Date: Feb 2007 Location: Carmichael, CA Posts: 1,630	bill, i just got my v3 & have 3 quick questions for you: 1) under "advanced hardware options", there is a checkbox for "i want high resolution rpm". what is that for? i tried it & get invalid data with my brushless sensor 2) under "advanced hardware options", there are checkboxes for "low temp option". what are they used for? fyi, i have the micro temp sensor (250Fmax). 3) does the rpm logged from a brushless sensor change depending on the # of poles entered, or is the software interpreting generic data based on the number of poles entered? ie: if the logged data is generic, then the number of poles only needs to be set correctly when displaying the rpm data. thanks in advance, kev

Dec 03, 2007, 10:04 PM	#67
wazzer Registered User Join Date: Jan 2005 Location: Kota Kinabalu, Malaysian Borneo Posts: 137	Subscribed

Dec 04, 2007, 11:53 PM	#68
billpa Registered User Join Date: Nov 2003 Posts: 1,595	Hi Truglodite, Thanks for your purchase. Those particular advanced options are not are not supported/tested options with your equipment. We generally use that "advanced" page for custom projects. The 'low temp' option is used to measure temperatures down to about -150 degrees. Don't ask me why. :-) Correct, the logged RPM data is generic, except that the powerpanel will display incorrect data if the # poles is not set correctly when the data are captured. Regards, Bill, for Eagle Tree

Dec 12, 2007, 12:37 PM	#69
diver don "Each Day Is A Lesson" Join Date: May 2004 Location: Goldsboro, NC Posts: 2,426	Bill, Thought I'd be a pain in the rear and ask if you received your shipment yesterday as expected? As you know I'm waiting for one from Tower. Thanks, Don

Dec 13, 2007, 01:19 AM	#70
billpa Registered User Join Date: Nov 2003 Posts: 1,595	HI All, Yes! We are shipping starting Thursday. Thanks for your patience! Regards, Bill, for Eagle Tree

Dec 14, 2007, 04:10 AM	#73
mabunixda Registered User Join Date: Dec 2007 Posts: 10	I ordered my v3 Logger on 12th - now the logger is back on backorder ... is there a possibility on the website to track my order? I tried to contact Bill by mail - but i do not know if my mail server is still having problems or Bill didnt answer

Dec 14, 2007, 03:13 PM	#74
billpa Registered User Join Date: Nov 2003 Posts: 1,595	Hi All, All eLogger V3 orders received on or before Wednesday, December 12th either have shipped or will ship today or Monday. Orders after Wednesday the 12th are backordered, shipping approximately 5 January. Merry Christmas! Regards, Bill, for Eagle Tree

Dec 20, 2007, 01:33 PM	#75
diver don "Each Day Is A Lesson" Join Date: May 2004 Location: Goldsboro, NC Posts: 2,426	Notfied by Tower that mine is preparing to ship. Guess there is a Santa. Thanks guys and have a Merry Christmas! Don Blatchley Goldsboro, NC