was reading through all the threads to do with airliners and i came across a small 747 powered by 4 gws direct drive props, it had a link to the site where the builder had it cnc cut. the link is-http://grenadeindoor.modelisme.com/747.htm, (on the site is the link to get the cnc files if you do have a cnc cuter)

but as many people i dont have a link to get the parts cnc cut, so i used the plan that was with the cnc cut files, i had to enlarge the plan big enough to build off but i have started the build now- pics will follow
Attached Thumbnails
14.5 KB - Views: 7
21.2 KB - Views: 15
10.1 KB - Views: 5

heres the fuselage bieng built in 2 halfs, the fuselage is roughly 86cm long, and the wing span 80cm- ish

my model willl be made of depron, please let me no if anyone is intreseted in the 747 i will be glad to share the plan but you will have to cut and stick it together your self, i will be gratefull of any input and glad to help you if you need it, i will post the plane when i have marked all the formers with the correct numbers

it is almost the same size as a shock flyer

I would be interested in plans, looks like a fun project...

These have always been my favorite models and the only true micro airliners.
The slow speed of these just make them look so real...

Will you be using the same GWS power setup? And I ran across a site that sells the GWS 30mm fans without motors of course, in case you are interested in making this a EDF airilner

https://www.unitedhobbies.com/UNITED...&ParentCat=144

Cant wait to see more of your project...

DT

bratty984,,very nice work!!!!

mesnick

What ???

Plans for a so great plane and you ask for interest ????
Yes, yes, yes, Yes, yes, yes, Yes, yes, yes, Yes, yes, yes.
Great, great, great, great, Great, great, great, great, great.

P l e a s e PPPPPPPlllllllaaaaaaannnnnnnssssss.

Good Luck to you and your great birdy!

Tomas

i went to my local model store, they didnt have any white depron so i had to have gray , so the fuz will be out of white depron, and the wings will be gray

needs sanding to shape

these are the plans i am working from please look at the drawings you will have to cut and stick them to gether to get the right size,.....

Keep up the good work.

It looks great!!

OOOhhh!

Thanks for the plans.
And lets have a look at your great building

Thomas

few more build pictures....

Looking good.

What is the width of the depron ?(3mm or 6mm)

What is the width of the stripes you used for the round areas?

Thanks,
Rony