HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by kfong, who may elect to delete unwanted replies.
Old May 30, 2007, 02:17 PM
Registered User
Sterling Heights, Michigan, United States
Joined Nov 2003
500 Posts
Discussion
Useful links

Place holders for links I want to keep track of.

Ebike links:
My Ebkike Links
http://www.endless-sphere.com/forums...hp?f=3&t=21888

My ebike projects:
Motobecan 08 Fantom, cyclone 650watts and A123
http://endless-sphere.com/forums/vie...php?f=3&t=6348

Mongoose and cheap brushed Currie motor setup
http://endless-sphere.com/forums/vie...hp?f=6&t=11542

Outback Mountainboard Electrified A123
http://endless-sphere.com/forums/vie...p?f=12&t=11137

X-Treme Electric Scooter conversion to stand-up
http://endless-sphere.com/forums/vie...p?f=12&t=12031

Dewalt A123 BMS battery interface solution
http://endless-sphere.com/forums/vie...p?f=14&t=10986

Other ebike links:

Dual freewheels
http://www.endless-sphere.com/forums...p?f=28&t=13532
http://www.endless-sphere.com/forums...p?f=28&t=13862

Proportional regen
http://endless-sphere.com/forums/vie...php?f=2&t=9950

Sensored motor
http://endless-sphere.com/forums/vie...sored+rc+motor

Ebike using turnigy motors
http://www.hobbycity.com/hobbycity/f...ts.asp?TID=289

Cheap regen circuits
http://endless-sphere.com/forums/vie....php?f=2&t=583

Use the 1010B as a current calibration source
http://endless-sphere.com/forums/vie...183694#p183694
-----------------------------------------------------------------------
RC Links:

RC Radio Tx - Re-inventing the wheel! - PC based joystick
http://www.rcgroups.com/forums/showthread.php?t=1231017

Build KapteinKUKs Simple and Low Part Count Quad, Hex and Tricopter Flight Controller
http://www.rcgroups.com/forums/showthread.php?t=1143569

Arduino FPV
http://www.rcgroups.com/forums/showthread.php?t=1234310

USB Joystick to RC
http://www.rcgroups.com/forums/showthread.php?t=1167074

DIY Diversity antenna system
http://www.rcgroups.com/forums/showthread.php?t=1169075

Micro f16 composite thread, way cool.
http://www.rcgroups.com/forums/showthread.php?t=1027690

UFO
http://www.rcgroups.com/forums/showt...hlight=compass

Scratch Building a 1/4 scale Bell 206B, 206L and 407
http://www.rcgroups.com/forums/showthread.php?t=1005164

Amazing VTOL F35b build
http://www.rcgroups.com/forums/showthread.php?t=1093705

Low cost DIY XBee/GPS plane locator
http://www.rcgroups.com/forums/showthread.php?t=993165

LP5DSM transmitter hack
http://www.rcgroups.com/forums/showthread.php?t=721024

Open source UAV
http://uavp.ch/moin
rc thread
http://www.rcgroups.com/forums/showthread.php?t=811550

Remzibi OSD
http://www.rcgroups.com/forums/showthread.php?t=1102975

Low cost DIY XBee/GPS plane locator
http://www.rcgroups.com/forums/showt...5#post11491094

Another DIY 2.4 RC system
http://www.rcgroups.com/forums/showthread.php?t=971053

Small servo mods and avr code
http://www.rcgroups.com/forums/showt...9#post11170886

Quadruino uav development
http://www.rcgroups.com/forums/showthread.php?t=885325

Nice commercial UAV board in development
http://www.rcgroups.com/forums/showthread.php?t=734456

Good composite resource thread with links.
http://www.rcgroups.com/forums/showthread.php?t=229462

A vtol design to try
http://www.rcgroups.com/forums/attac...mentid=1987832

Spruce Goose, simply amazing project. Gotta add a laser cutter to my CNC one day.
http://www.rcgroups.com/forums/showthread.php?t=699098

Neat, electro-mechanical bomb drop using an old servo
http://www.rcgroups.com/forums/showthread.php?t=899523

DIY AP plane with plans
http://www.rcgroups.com/forums/showthread.php?t=827488
Even simpler design
http://www.rcgroups.com/forums/showthread.php?t=881734

P38 GWS build, nice attempt at scale. Something I need to look at when I build mine.
http://www.rcgroups.com/forums/showthread.php?t=677943

Source for cheap servo connectors
http://www.rcgroups.com/forums/showthread.php?t=819509

Good B52 construction method using blue foam and hotwire
http://www.rcgroups.com/forums/showthread.php?t=571313

Nice EDF designed Bae Hawk
http://www.rcgroups.com/forums/showthread.php?t=727715

Just picked up a LP5DSM - hack for a 9C planned
http://www.rcgroups.com/forums/showthread.php?t=721024

Decals
http://www.rcgroups.com/forums/showthread.php?t=359029

Great monokote technique for decal work
http://www.rcgroups.com/forums/showt...93#post9457541

Another low cost OSD display, diy co-pilot
http://www.rcgroups.com/forums/showthread.php?t=732783

Jet style OSD display
http://www.rcgroups.com/forums/showthread.php?t=837760

Nice use of vacuum formed plastic to create detail with stick and balsa style technique
http://www.rcgroups.com/forums/showthread.php?t=830970

Learning to do composites
http://www.rcgroups.com/forums/showthread.php?t=521523
http://www.rcgroups.com/forums/showthread.php?t=675381

Mini-HowTo - The Wet Seam
http://www.rcgroups.com/forums/showthread.php?t=653549

very small aerobatic indoor planes
http://www.rcgroups.com/forums/showthread.php?t=806218

DIY retracts
http://www.rcgroups.com/forums/showt...ringe+retracts
http://www.rcgroups.com/forums/showthread.php?t=288179

DIY 2.4ghz system
http://www.rcgroups.com/forums/showthread.php?t=801036

DIY eCCPM mixer@flybarless heli
http://www.rcgroups.com/forums/showthread.php?t=624290
http://www.rcgroups.com/forums/showt...14#post9184698

DIY Jet pilot figures for your planes
http://www.rcgroups.com/forums/showthread.php?t=73528
http://www.rcgroups.com/forums/showthread.php?t=79507

RF amps
http://www.rcgroups.com/forums/showthread.php?t=759494
http://www.rc-cam.com/forum/index.ph...opic=2194&st=0

900mhz all in one micro RC development
http://www.rcgroups.com/forums/showt...92#post9044022

Wow, make incredibly small bl motors
http://www.rcgroups.com/forums/showthread.php?t=596219

DIY DLG
http://www.rcgroups.com/forums/showthread.php?t=688041

Another UAV thread to follow up on
http://www.rcgroups.com/forums/showthread.php?t=734791

Cool A123 thread on scooters and such.
http://www.rcgroups.com/forums/showt...566256&page=82

Micro EDF motor
http://www.rcgroups.com/forums/showt...eam+Losi+motor

DIY micro EDF motor
http://www.rcgroups.com/forums/showthread.php?t=168528

900mhz DIY system
http://www.rcgroups.com/forums/showthread.php?t=505175

New OSD chip from maxim
http://www.rcgroups.com/forums/showthread.php?t=778328

CustomCDR 16.5mm motors
http://www.rcgroups.com/forums/showthread.php?t=622774

Hall effect sensors and remagnetizing magnets
http://www.rcgroups.com/forums/showthread.php?t=307133

RC-USB Joystick
http://www.rcgroups.com/forums/showthread.php?t=508122

A123 cells
http://www.rcgroups.com/forums/showthread.php?t=626609

Baseload antenna calculator
http://kreature.dynu.com/calculators/baseload.htm

Current UAV project I'm working on.
http://www.rc-cam.com/forum/index.ph...opic=2031&st=0

Neat, will have to try to wind one. Small inrunner 7.5mm bl motor.
http://www.rcgroups.com/forums/showthread.php?t=168528

DIY 4 blade helicopters on my list of things to do
http://www.rcgroups.com/forums/showthread.php?t=716870
esc conversion
http://www.rcgroups.com/forums/showthread.php?t=766589

I have a couple of these motors, now I need to wind them for an edf.
http://www.rcgroups.com/forums/showt...ghlight=ac+diy

Cool just picked up a spectrum dx6 for my 9CAP, more to follow
http://www.rcgroups.com/forums/showthread.php?t=540007
more 2.4ghz stuff
http://webx.dk/rc/uhf-link2/uhf-link2.htm
http://spektrumdx6.com/default.aspx

Corona actuator conversion
http://www.rcgroups.com/forums/showthread.php?t=576667

Flatbed printing
http://www.rcgroups.com/forums/showthread.php?t=691508

4 Channel PicooZ mod
http://www.rcgroups.com/forums/showthread.php?t=662454

Composite diy
http://www.rcgroups.com/forums/showthread.php?t=324367

Videos
composite build of an FB5 plane
http://video.google.com/videoplay?do...75476262&hl=en
kfong is offline Find More Posts by kfong
Last edited by kfong; Mar 21, 2011 at 12:54 PM.
Reply With Quote
Sign up now
to remove ads between posts
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery The "Useful Links for Scale Modellers" thread! tim hooper Scale Kit/Scratch Built 200 Feb 24, 2014 09:34 AM
Gallery The useful links thread! tim hooper Vintage & Old-Timer Designs 85 Jan 21, 2014 03:39 PM
Idea Control line- Useful links and freeplans Airboatflyingshp Control Line 3 Aug 02, 2006 04:19 PM