Hey CK... Guess what im doing...

Originally Posted by Charger

A suggestion: Seems to be a normal solid TL 50 build requires about 17 +/- 0z in the nose to balance. I run 2X2s 3700's for 4s at 14 0z, most often, and add around 3 0z lead. The consensus seems to be, add more batt weight instead of lead.

Thake from the my favorite wing thread.. Charger has it right

Ken is lookin at the demon paul,not da fity
ck

Doh... K,

I'm working on your box and with any luck will have it in the mail on wed...

also i did a house cleaning on one of the oldest tl50's still flying...

The Orange is old enough to have a permanent sun fade. HAHAHA

I think i smoked my Micro Dan motor I sent it off to be looked at today but i figured it would be a nice fit on the demon 36 (you know the one that has smoked every motor and esc ever put on it) I think its possesed..

Im also cleaning al the ritewings and going to try to get the tuning flights in before i box the for AEF.. I will have to fly foamies till after AEF,,

Want to have a nice Ritewing showing..

BTW i run 3300's with no lead 2 times 2s 20c packs in the 36 inch demon...

When you come down I have some presents for ya.
Thnx for workin on thet stuff buddy.
ck

Originally Posted by PaulVi

Doh... K,

I'm working on your box and with any luck will have it in the mail on wed...

also i did a house cleaning on one of the oldest tl50's still flying...

The Orange is old enough to have a permanent sun fade. HAHAHA

I think i smoked my Micro Dan motor I sent it off to be looked at today but i figured it would be a nice fit on the demon 36 (you know the one that has smoked every motor and esc ever put on it) I think its possesed..

Im also cleaning al the ritewings and going to try to get the tuning flights in before i box the for AEF.. I will have to fly foamies till after AEF,,

Want to have a nice Ritewing showing..

I think this year im packing the wings in diapers so i have spares for after Jason fly's if he is there...

Presents Me like presents...

Thank's Bro.. Actually all i have left to do is buy the 6pin connectors for the steper motors and asseble everything into the boxes i have the end plates all cut and drilled still need to drill the bottom for mounting the boards and the caps..

But i have time im off till wed...

Hello fellow RWA. I'm starting a 40" Demon build setup for 5sA123 cells and was wanting to post some pics of my work as I go and get your feedback and help. Should I post my build here to help get restickied or start a new thread for the Demon?

Where ever you want bud,We can always add the pics to the front page if they look to help people with the 123' layout., We havent had too many pix of those builds.
Ck

Originally Posted by Wingman65

Hello fellow RWA. I'm starting a 40" Demon build setup for 5sA123 cells and was wanting to post some pics of my work as I go and get your feedback and help. Should I post my build here to help get restickied or start a new thread for the Demon?

Thanks Chris. The demon is thick in the middle so the cells should fit easily with the foam cut all the way through but these are some big packs when put together. I have an idea for the rx batt that I'll show when battery bay is layed out.


Tony

Originally Posted by klique

Ken is lookin at the demon paul,not da fity
ck

Not looking...purchased


CK go ahead and build the D-lite! I'll let you know about the motor by sunday.

Ken

Originally Posted by kctrading

Not looking...purchased


CK go ahead and build the D-light! I'll let you know about the motor by sunday.

Ken

Sweet... Your one of the few the proud the addicted and you don't even know it yet

Not a ritewing, but got a few quick passes of my reaper which is training me for even faster wings I will have in the future (I hope )

http://www.rcgroups.com/forums/showthread.php?t=792595

Diggs

This is my first Demon build and third Ritewing build so any comments or suggestions are welcome and encouraged. For anyone looking to purchase a wing, a Ritewing not only gets you a solid and proven performer but you will learn a new building technique as well as get the best personal tech support around. I'm like a kid on Christmas when brown brings me a big box from Arizona, my demon has arrived. Open the box and there is a surprise bonus, a set of 40' Slice builder cores. Thanks CK.

The build begins with layout around the A123 pack. These cells are fat but the demon is thick enough in the middle.

site suggestions and complaints I have been activly asking to get this added back in as a sticky but im not sure Ghram is getting my message.. any one else want to try..