Thanks fellas I appreciate it.

Hey guys I just got all the parts ordered for cutting monster wings.The new cnc will cut 100 plus inches of span.
I think some 80 inches of tl twin is in order.
ck

Twin??? Why stop there? Quad het 4w's.........

Ok 120 inch 8motor goliath.
ck

16000 watts

Originally Posted by Atom1025

Twin??? Why stop there? Quad het 4w's.........

Double motor gear boxed, times 2 swinging big contra rotating props

Paul keep your eye out buddy stuff is comin you way.
How big do you want to go guys?
Fs 80'LOL
I have ben collecting the parts for 6 months ,the rails the slides are all gatherd from ebay,so it was time to go get all the electronics tonight.
Cant wait,you guys can build them one piece or make them with joiners if desired.
ck

Originally Posted by PaulVi

Double motor gear boxed, times 2 swinging big contra rotating props

Originally Posted by klique

Paul keep your eye out buddy stuff is coming you way.
How big do you want to go guys?
Fs 80'LOL
I have been collecting the parts for 6 months ,the rails the slides are all gathered from ebay,so it was time to go get all the electronics tonight.
Cant wait,you guys can build them one piece or make them with joiners if desired.
ck

what is the largest you can cut I would still like to try to see a 120TL for the big floaty days geared motor for a slow climb up the motor off for that relaxed afternoon flying..

I have my EYE out for packages..

Don't laugh a 80inch FS would be out of sight..

I am not laughing a 120' fs would be outa site.LOL
I want to go 70 plus inch wide on the towers.
I will cut each side in one pass.But what is nice is after the cut you will be able to lift ea wing 1/2 off in 2 to 3 joinable pieces,If it is under 90 inches it can be done in 2 pieces .
If the wing is over 90 inches it will most likely be 4 pieces total.
This will help in shipping and building.I will be able
at this point to do a 130 inch.
It could be done w out much trouble ,And not having to do multiple setups and cuts would make it verry simple.
They will also be epp not styrene,And will be avail upon request if all goes rite.
Ck

Originally Posted by PaulVi

what is the largest you can cut I would still like to try to see a 120TL for the big floaty days geared motor for a slow climb up the motor off for that relaxed afternoon flying..

I have my EYE out for packages..

Don't laugh a 80inch FS would be out of sight..

Originally Posted by klique

I am not laughing a 120' fs would be outa site.LOL
I want to go 70 plus inch wide on the towers.
I will cut each side in one pass.But what is nice is after the cut you will be able to lift ea wing 1/2 off in 2 to 3 joinable pieces,If it is under 90 inches it can be done in 2 pieces .
If the wing is over 90 inches it will most likely be 4 pieces total.
This will help in shipping and building.I will be able
at this point to do a 130 inch.
It could be done w out much trouble ,And not having to do multiple setups and cuts would make it verry simple.
They will also be epp not styrene,And will be avail upon request if all goes rite.
Ck

sweet as always let me know if you need anything also i will get that laptop togeter this week,.,

Finally got all the lighting done!!! Still a lot of prep work, more then ussual.

Hope to get to the glass tomorrow, well see.

that is freakin' sweet.

Dude, that is what I was after. Bright and visible and unique. You nailed it all. I know it has been a bear to say the least, but thanks!!! My neighbor came over at beer thirty tonight and I showed him this post. He can't stop talking about it Keep on with it, you are on a roll.

Diggs

very cool Adam. Great job!

is that some sort of light pipe as diffuser or leds alone?

Its basically a clear straw.

When the white coro tips are put on it catches the rd and green and really light up.

Thanks guys, this bird has a lot of time into it.