the "REAL" show

3dddflyer · Oct 25, 2002, 04:48 PM

what do you mean the real stuff i want to see you hover a jet !!!!!!

i chalange any jet to a hovering contest.....

hust kidding tim

JasonJ · Oct 25, 2002, 06:10 PM

I saw a idea for a jet powered heli a few years back where the jet exhaust was routed out the rotor blades and thats what powered the rotor, Did they ever build that thing? It was in PM I think I saw it. Nice thing was you never had to worry about Ice on the rotors

.

e-sailpilot86 · Oct 25, 2002, 11:38 PM

Hovering a jet, hmm...
DocWatson is working on his X-34 project, that certainly counts, but I know what you're thinking, off the tail pipe!

Well, there are some of the fans that generate just enough thrust for that kind of feat, I forgot the names of them, but I remember they were quite impressive. Both handbuilt and I believe were over 20 cells and used Plettenburg motors. The solution to the problem is either thrust vectoring in combination with intake "vectoring"(?), or just use the type of control systems this used:

That would make quite an event, now wouldn't it?

A slave fan could be used to direct the air out tubes in the wing, tail, nose, etc. Or use CO2 or some other non-replenishable method of control. Sure wouldn't want to lose pressure and have zero control off the tail pipe!

Dr. Jet · Oct 26, 2002, 01:44 PM

Tim, the F9-F will hover (almost: 5.75 lbs AUW with 5.5 lb thrust). I want to see your E3D do 130 mph at 12" above the runway!!!

3dddflyer · Oct 29, 2002, 02:22 PM

Tim, the F9-F will hover (almost: 5.75 lbs AUW with 5.5 lb thrust). I want to see your E3D do 130 mph at 12" above the runway!!!

my e3d will do 130 12" off the deck i just need to use your bungee launcher and i will hurel the remaning pices of my e3d with rocket asst to 130 mph..or i can drop the pices from a high altitude and the pices will do 130 mph........ha ha ha

.............tim

3dddflyer · Oct 30, 2002, 01:59 PM

Hey Dr JET anyone can fly a jet i want to see you hover ....what happend to you ?
see you soon .........Tim

gregg f · Oct 30, 2002, 02:05 PM

Quote:

Originally posted by 3dddflyer
Hey Dr JET anyone can fly a jet i want to see you hover ....what happend to you ?
see you soon .........Tim

is this the e3d that was flying at jet day pt2?

U812 · Oct 30, 2002, 04:43 PM

Quote:

Hey Dr JET anyone can fly a jet

Sounds like pudknocker talk to me.

3dddflyer · Oct 30, 2002, 08:39 PM

yes it was the 3d that was flying on jet day but it has since hade a gravity problem and is know in several pices..
i order a new 3d from gary today so i will have a new one for dec 14th.....

see ya all soon ....tim

Dr. Jet · Oct 30, 2002, 09:59 PM

Hey Tim!! I have a great idea!

You hover real low at the end of the runway, and I'll fly under you at full speed!!

Joe Elston · Oct 30, 2002, 10:09 PM

Please take video of that for those of us that cant make it too the event!!

It's gonna be good. Pass the popcorn please

Sorry that I cant attend

Joe

gregg f · Oct 30, 2002, 10:17 PM

Quote:

Originally posted by Dr. Jet
Hey Tim!! I have a great idea! You hover real low at the end of the runway, and I'll fly under you at full speed!!

which side of the pilot fence?
last time he landed in the pits

U812 · Oct 30, 2002, 10:37 PM

Ha, Ha

3dddflyer · Oct 31, 2002, 12:11 PM

hey Dr Jet that sounds great it should make for some interesting video....also i flew lucky morgans wild style today and i got to say that one will probably end up in my hanger....

...se ya tim

Dr. Jet · Nov 01, 2002, 09:07 PM

Hmmmmm....... I wonder if balsa bits and Monokote scraps will damage the Schubeler? I sure wouldn't want to damage that fan. Maybe I should shut it off just before I go through....er....UNDER your new 3D thingy.

Oct 25, 2002, 04:48 PM	#1
3dddflyer Have You Seen My SAK Join Date: Aug 2002 Location: Glamis Posts: 197	the "REAL" show what do you mean the real stuff i want to see you hover a jet !!!!!! i chalange any jet to a hovering contest..... hust kidding tim

Oct 25, 2002, 11:38 PM	#3
e-sailpilot86 Registered User Join Date: Jun 2001 Posts: 1,507	Hovering a jet, hmm... DocWatson is working on his X-34 project, that certainly counts, but I know what you're thinking, off the tail pipe! Well, there are some of the fans that generate just enough thrust for that kind of feat, I forgot the names of them, but I remember they were quite impressive. Both handbuilt and I believe were over 20 cells and used Plettenburg motors. The solution to the problem is either thrust vectoring in combination with intake "vectoring"(?), or just use the type of control systems this used: That would make quite an event, now wouldn't it? A slave fan could be used to direct the air out tubes in the wing, tail, nose, etc. Or use CO2 or some other non-replenishable method of control. Sure wouldn't want to lose pressure and have zero control off the tail pipe! Last edited by e-sailpilot86; Oct 25, 2002 at 11:43 PM.

Oct 26, 2002, 01:44 PM	#4
Dr. Jet H301 Libelle Pilot Join Date: Sep 2000 Location: Oceanside, California Posts: 1,248	Tim, the F9-F will hover (almost: 5.75 lbs AUW with 5.5 lb thrust). I want to see your E3D do 130 mph at 12" above the runway!!! Last edited by Dr. Jet; Oct 28, 2002 at 08:58 AM.

Oct 29, 2002, 02:22 PM	#5
3dddflyer Have You Seen My SAK Join Date: Aug 2002 Location: Glamis Posts: 197	real show Tim, the F9-F will hover (almost: 5.75 lbs AUW with 5.5 lb thrust). I want to see your E3D do 130 mph at 12" above the runway!!! my e3d will do 130 12" off the deck i just need to use your bungee launcher and i will hurel the remaning pices of my e3d with rocket asst to 130 mph..or i can drop the pices from a high altitude and the pices will do 130 mph........ha ha ha .............tim Last edited by 3dddflyer; Oct 30, 2002 at 12:13 PM.

Oct 30, 2002, 01:59 PM	#6
3dddflyer Have You Seen My SAK Join Date: Aug 2002 Location: Glamis Posts: 197	anyone can fly a jet Hey Dr JET anyone can fly a jet i want to see you hover ....what happend to you ? see you soon .........Tim

Oct 25, 2002, 06:10 PM	#2
JasonJ Dude, where's My Plane? Join Date: Mar 2001 Location: Green Lane PA USA Posts: 2,163	I saw a idea for a jet powered heli a few years back where the jet exhaust was routed out the rotor blades and thats what powered the rotor, Did they ever build that thing? It was in PM I think I saw it. Nice thing was you never had to worry about Ice on the rotors .

Oct 30, 2002, 08:39 PM	#9
3dddflyer Have You Seen My SAK Join Date: Aug 2002 Location: Glamis Posts: 197	yes it was the 3d yes it was the 3d that was flying on jet day but it has since hade a gravity problem and is know in several pices.. i order a new 3d from gary today so i will have a new one for dec 14th..... see ya all soon ....tim

Oct 30, 2002, 09:59 PM	#10
Dr. Jet H301 Libelle Pilot Join Date: Sep 2000 Location: Oceanside, California Posts: 1,248	Hey Tim!! I have a great idea! You hover real low at the end of the runway, and I'll fly under you at full speed!!

Oct 30, 2002, 10:09 PM	#11
Joe Elston Acme Powered! Join Date: Jul 2000 Location: Orange,CA Posts: 4,035	Take Video Please take video of that for those of us that cant make it too the event!! It's gonna be good. Pass the popcorn please Sorry that I cant attend Joe

Oct 30, 2002, 10:37 PM	#13
U812 Registered User Join Date: Sep 2002 Posts: 7,926	Ha, Ha

Oct 31, 2002, 12:11 PM	#14
3dddflyer Have You Seen My SAK Join Date: Aug 2002 Location: Glamis Posts: 197	this side of the fence hey Dr Jet that sounds great it should make for some interesting video....also i flew lucky morgans wild style today and i got to say that one will probably end up in my hanger.... ...se ya tim Last edited by 3dddflyer; Oct 31, 2002 at 09:54 PM.

Nov 01, 2002, 09:07 PM	#15
Dr. Jet H301 Libelle Pilot Join Date: Sep 2000 Location: Oceanside, California Posts: 1,248	Hmmmmm....... I wonder if balsa bits and Monokote scraps will damage the Schubeler? I sure wouldn't want to damage that fan. Maybe I should shut it off just before I go through....er....UNDER your new 3D thingy.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion Show us your lifting body (real or "rc") pix	b36roxs	Foamies (Scratchbuilt)	17	Jan 22, 2009 06:35 PM
A real "Turn-On"	Jurgen Heilig	Foamies (Kits)	452	Jan 06, 2005 08:11 AM
1st "real" flight on the TM	AtomHeartMother	Parkflyers	5	Feb 14, 2003 04:11 PM
"Red Shoes" Show -CBS- (Rob Lowe)	retiredVTT	Life, The Universe, and Politics	7	Dec 12, 2002 03:02 AM
"Real" transmitters with RTF planes?	Sparr	Indoor and Micro Models	4	Apr 17, 2002 11:01 AM