Davereap's flying wing
Thanks Davereap for something so simple even I can build it in a couple of evenings, and I build at a sub-glacial rate!
6mm Depron. LE 'spar' from 6mm dia CF tube split lengthways (didn't have any 4mm tube ). Held together with packing tape, a little UHU POR and hot glue. 10.7oz with GWS 2205, APCe 8x4, 1200mAh 3S1P LiPo, cheap 18A ESC, GWS rec and a couple of 5g servos. Keel reinfoced with fibre tape and 3M77, as is the TE.
Hovers at about 1/2 throttle and wafts around on hardly any throttle!
ImagesView all Images in thread
just came across this thread..... I always use the little hitec receivers at about £15 from all's hobbies , the HFS 05MS is really great,light and over 1 mile range, where the others/gws quote 800meters as full fange.
got 4 now , no glitches, no problems
also check out robot birds they are selling 3 versions of the blue motor ive been plugging at £7.95
the 1300Kv version is the one for the estratos and vulcan using 11.1v and a gws8x4 cut to 7x4 (not slowfly props)
they are also selling a 2500 version, (ive just ordered one) which should do for my faster designs
just sent you a pm then found your posts ....dave
ps .. where did you get that nice pretty red prop saver
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Review of Sylvair's flying wing||PunkerTFC||Parkflyers||0||Jun 22, 2003 08:32 PM|
|Big Flying Wing 67inches Home Built F/s||CLARKE||Aircraft - Electric - Airplanes (FS/W)||5||May 20, 2002 07:08 AM|
|Flying wing site for Zagi's, Razor's, Viper Twins, etc.||crashnburn||Site Chat||4||Jan 10, 2002 03:36 PM|
|EAM's Popfly, an indoor flying wing||sparks||Parkflyers||0||Oct 27, 2001 06:53 PM|
|Article||HobbyFlite's Flying Wing||Pat Mattes||Electric Plane Talk||0||Nov 01, 1999 12:00 AM|