|Mar 24, 2007, 07:26 PM|
BMS-376DDG Digital Micro Servo For Tail??
Anyone tried one running with a 401 in digital servo mode?
They are quite cheap for a digital and seem to have good specs.
Weight: 9.8 Grams / 0.41 oz (with wire)
Size: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 in.
Torque At 4.8V: 21 oz.in.
Speed At 4.8V: 0.11 sec / 60°
Torque At 6.0V: 26 oz.in.
Speed At 6.0V: 0.09 sec / 60°
Ball Bearing: Yes
Metal Gears: No
See Link: http://www.bphobbies.com/view.asp?id...293&pid=NBB206
|Sep 01, 2009, 04:11 PM|
I couldnt get mine to work with a futaba 240, might be different with a 401 or other gyro with a digital setting. Worked fine plugged directly in to the RX, actually used it on the rudder of a 40" foamie for a while, it would oscillate on the ground but behaved fine in the air.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|What Mini Digital Servo for tail on BT corona??||Orion_V||Electric Heli Talk||19||Sep 24, 2006 10:47 AM|
|For Sale||JR DS281 281 digital micro servo (used) (2pcs for $50 shipped)||adamg||Aircraft - General - Radio Equipment (FS/W)||1||Sep 14, 2006 11:34 PM|
|Question||[TREX] Digital servo for tail?||LanternMaker||Mini Helis||2||Jun 25, 2006 09:43 AM|
|The Best Sub Micro Servo for tail rotor?||Charlie1||Micro Helis||2||Sep 08, 2005 08:08 AM|
|Best micro servo for low voltage?||Tapio||Radios||4||Aug 28, 2002 07:04 AM|