SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
 
Thread Tools
Old Nov 06, 2006, 12:11 PM
Guest
n/a Posts
Enya 1.20 4c (four stroke) instructions

I need an instuction manual for an ENYA 120 4C I have.
I need to re-set-up the head valves and I dont know the dinstance..
Thanks in advance to every one


Old Nov 06, 2006, 02:11 PM
Ken Day
Guest
n/a Posts
Re: Enya 1.20 4c (four stroke) instructions

On Mon, 6 Nov 2006 20:05:27 +0200, "Ðáíáãéþôçò Êùóôáëïýðçò"
<pakos_65@otenet.gr> wrote:

>I need an instuction manual for an ENYA 120 4C I have.
>I need to re-set-up the head valves and I dont know the dinstance..
>Thanks in advance to every one
>

I have an Enya R 1.20 new in box that I haven't looked at for ages.
I'm sure I have the manual. If all you need is the valve clearance
that would be .002 - .004 inches or .05-.10 mm.
This is the recommended clearance for most 4 strokes.

If you need any other info on that engine let me know.

Ken
Old Nov 06, 2006, 04:11 PM
Robbie and Laura Reynolds
Guest
n/a Posts
Re: Enya 1.20 4c (four stroke) instructions


Ken Day wrote:

> >

> I have an Enya R 1.20 new in box that I haven't looked at for ages.


I have one of those new in the box, too. I've always meant to put it on
an Omen II from RCM plans. I have the plans, I have the balsa wood, and
I have the engine. They just never seem to get themselves all put
together...
Old Nov 07, 2006, 04:11 AM
Ken Day
Guest
n/a Posts
Re: Enya 1.20 4c (four stroke) instructions

On Mon, 06 Nov 2006 14:47:17 -0600, Robbie and Laura Reynolds
<robbie@kcnet.com> wrote:

>
>Ken Day wrote:
>
>> >

>> I have an Enya R 1.20 new in box that I haven't looked at for ages.

>
>I have one of those new in the box, too. I've always meant to put it on
>an Omen II from RCM plans. I have the plans, I have the balsa wood, and
>I have the engine. They just never seem to get themselves all put
>together...

Know exactly what you mean. I started building an Extra 230 27% from
an Ace kit over five years . The R 1.20 was going on that.
Well , five years later the airframe is ready to cover and has been in
that stage for the last four years. LOL
Maybe one day :-)
Not going to get into all the others that are partially built or need
repair.
I have somewhere in the neighborhood of 30 airplanes and most are in
in various stages of build or in need of repair.

Ken
Old Nov 07, 2006, 10:11 AM
Robbie and Laura Reynolds
Guest
n/a Posts
Re: Enya 1.20 4c (four stroke) instructions



Ken Day wrote:
>
> On Mon, 06 Nov 2006 14:47:17 -0600, Robbie and Laura Reynolds
> <robbie@kcnet.com> wrote:
>
> >
> >Ken Day wrote:
> >
> >> >
> >> I have an Enya R 1.20 new in box that I haven't looked at for ages.

> >
> >I have one of those new in the box, too. I've always meant to put it on
> >an Omen II from RCM plans. I have the plans, I have the balsa wood, and
> >I have the engine. They just never seem to get themselves all put
> >together...

> Know exactly what you mean. I started building an Extra 230 27% from
> an Ace kit over five years . The R 1.20 was going on that.
> Well , five years later the airframe is ready to cover and has been in
> that stage for the last four years. LOL
> Maybe one day :-)
> Not going to get into all the others that are partially built or need
> repair.
> I have somewhere in the neighborhood of 30 airplanes and most are in
> in various stages of build or in need of repair.
>
> Ken


Well, at least my balsa wood and plans stack nicely. I made a rule a
long time ago that I can not start an airplane until the last one is
finished. That way, instead of having ten unfinished projects I have a
list of ten things to build but only one is in progress at a time. The
Omen II has been pushed down the list repeatedly in favor of smaller
planes that I know would get finished faster.

I'm breaking the rule currently by building a Lazy Ace while I have a
pair of Cloud Dancer 40s framed up. That happens once in a while...
 


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Enya 1.20 4C $175 staggerwing Aircraft - Fuel - Engines and Accessories (FS/W) 2 Aug 04, 2007 04:28 PM
Wanted Trade ENYA 1.20 4 stroke for 9C TX hoofhearted Aircraft - Fuel - Engines and Accessories (FS/W) 0 Jun 13, 2007 06:48 PM
Discussion ENYA 1.20 4 stroke papion007 Engines 2 Aug 09, 2006 09:58 AM
Sold ENYA 1.20 Four Stroke punkindrublik Aircraft - Fuel - Airplanes (FS/W) 0 Dec 14, 2005 11:51 PM
enya 1.20 4C Exhaust nut SCAT-R-D Engines 0 May 03, 2005 07:09 PM