HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Aug 30, 2002, 07:50 PM
Registered User
bfraser's Avatar
Joined Feb 2000
380 Posts
JR 8103 flap/throttle mixing with gear switch question

As I sold my JR8103 transmitter a while back I'm trying to remember how I set up the mixing so that when I have the gear switch pointed away from me the throttle stick works for the throttle(motor) and when its towards me it works for the flaps (butterfly). As I'm helping a friend with his JR8103 I really have to figure this out. So far I have gone to the #3 free mix and mixed spoil/spoil with negative offset of around -170 and this cancels out the motor when the gear switch is towards me. Then under the Butterfly programming section I have increased the throw of the flap to 125% (-170 offset) but only get about 75% of this for flap travel. So instead of getting close to 90 degrees of flap we get around 50-60 degrees. Anyone know what I need to do to get the proper amount of flap throw? Bernard
bfraser is offline Find More Posts by bfraser
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold JR 8103 Digital Trim radio with RX ncrego Aircraft - General - Radio Equipment (FS/W) 0 Nov 19, 2006 07:12 PM
JR 8103 Throttle Curves with a Corona head04 Electric Heli Talk 2 Jun 23, 2005 11:48 PM
JR 8103 3 pos flap switch programming Lothar Thole Hand Launch 1 Oct 14, 2004 12:38 AM
jr 8103 flap set-up CHARLIE BRITT 7 Radios 4 May 02, 2003 11:43 PM
JR 8103 question BillH Electric Plane Talk 4 Nov 03, 2001 02:56 PM