HobbyKing.com New Products Flash Sale
R/C Groups.com   RCCars Crack Roll Flying Giants RC Power The E Zone Lift Zone Our Sponsors
R/C Groups.com


Go Back   RC Groups > Regional Forums > China

Reply Post New Thread  Previous Thread Next Thread
 
Thread Tools
Old Sep 24, 2006, 03:16 AM   #46
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Reservoir, south Beijing

So, Sept 24th we went to this dry reservoir to see if it' good to fly there. Unfortunately ground is sand and really dusty, so unless you don't mind you may fly, but otherwise you might be scared to ruin your engine.

Our Venus was more than perfect into there with hand launch and dead stick landings. Juhani got finally chance to fly and did so really well.

I tested Ice-Fire as well, even couple discus launches, but seems it needs lots of practice. Shallow slope gave me couple of minutes slope soaring though

Here's couple of photos of the place...
Attached Thumbnails
  • Name: Reservoir1.jpg
Views: 114
Size: 74.6 KB
Description: Lots of space there Lots of space there 74.6 KB · Views: 114

  • Name: Reservoir2.jpg
Views: 114
Size: 87.6 KB
Description: We were not the only ones We were not the only ones 87.6 KB · Views: 114

  • Name: Reservoir3.jpg
Views: 113
Size: 143.7 KB
Description: Juhani getting ready for flight with Venus Juhani getting ready for flight with Venus 143.7 KB · Views: 113

illi is offline Find More Posts by illi   Reply With Quote
Old Sep 24, 2006, 07:59 AM   #47
Bin
 
Join Date: Nov 2004
Location: Beijing China
Posts: 15
Ilkka
I went the new place I mention to you today, feel very good you can see in the pics there, assemble many modelers came over 20 guys approximately, they had 4 gas powered big one and damage 2, route cause is engine dead in the air, so that means around 1000RMB's local gas engine is uncertainty. However, I got rest satisfied with today's flying.
Attached Thumbnails
  • Name: 61engine2strock 054.jpg
Views: 115
Size: 36.4 KB
Description: jet should be OK on this runway jet should be OK on this runway 36.4 KB · Views: 115

  • Name: 61engine2strock 102.jpg
Views: 130
Size: 77.1 KB
Description: our team our team 77.1 KB · Views: 130

  • Name: 61engine2strock 051.jpg
Views: 118
Size: 74.9 KB
Description: My G202 with good exhibition My G202 with good exhibition 74.9 KB · Views: 118

  • Name: 61engine2strock 059.jpg
Views: 142
Size: 53.5 KB
Description: my kid and I my kid and I 53.5 KB · Views: 142

  • Name: 61engine2strock 103.jpg
Views: 104
Size: 49.5 KB
Description: Great, man! Great, man! 49.5 KB · Views: 104

  • Name: 61engine2strock 065.jpg
Views: 112
Size: 81.3 KB
Description: Lost half wing once, today it welcomes back in air. I owned it but been presented to a friend who make it recover. Lost half wing once, today it welcomes back in air. I owned it but been presented to a friend who make it recover. 81.3 KB · Views: 112


Last edited by delphichenbin; Sep 24, 2006 at 08:43 AM.
delphichenbin is offline Find More Posts by delphichenbin   Reply With Quote
Old Sep 24, 2006, 08:11 PM   #48
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Location

Chen Bin, that looks better than BDA or reservoir, can you post or pm a Google Earth placemark of this flying place?
illi is offline Find More Posts by illi   Reply With Quote
Old Sep 29, 2006, 09:09 PM   #49
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Guys,

What are your plans for the National Day holidays? I've got Monday to Wednesday off.

Cheers,
Albert
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Old Sep 30, 2006, 06:21 PM   #50
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Quote:
Originally Posted by delphichenbin
Ilkka
I went the new place I mention to you today, feel very good you can see in the pics there, assemble many modelers came over 20 guys approximately, they had 4 gas powered big one and damage 2, route cause is engine dead in the air, so that means around 1000RMB's local gas engine is uncertainty. However, I got rest satisfied with today's flying.
Hi Ilkka,

Coordinates for the place:
39º 42' 37.97" N
116º 23' 49.63" E

The overlays in Google Earth is not updated. The road is wide and long with good wind direction. Check it out.

Cheers,
Albert
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Old Sep 30, 2006, 06:34 PM   #51
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Quote:
Originally Posted by Beijing_eFlyer
Guys,

What are your plans for the National Day holidays? I've got Monday to Wednesday off.

Cheers,
Albert
Albert, How about going to China Model Expo on wednesday? Tuesday is professional day, so I guess we need to settle for wednesday then? Don't go on Friday as they are already bagging their stuff to go home, at least that's what they did last year.

Ilkka
illi is offline Find More Posts by illi   Reply With Quote
Old Oct 01, 2006, 10:26 AM   #52
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Quote:
Originally Posted by illi
Albert, How about going to China Model Expo on wednesday? Tuesday is professional day, so I guess we need to settle for wednesday then? Don't go on Friday as they are already bagging their stuff to go home, at least that's what they did last year.

Ilkka
Wednesday's fine by me. I'll be there in the afternoon, hopefully we can bag some good stuff

Cheers,
Albert
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Old Oct 02, 2006, 07:09 PM   #53
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Sneak preview of the Model Exhibition

Quote:
Originally Posted by Beijing_eFlyer
Wednesday's fine by me. I'll be there in the afternoon, hopefully we can bag some good stuff

Cheers,
Albert
Check out this link. Lots of goodies on display!

http://www.5irc.com/content.asp?id=927554

Can't wait....
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Old Oct 03, 2006, 10:07 AM   #54
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Bei An He flying place

Last sunday we went to Bei An He, northwest of Beijing to a small airfield (?). Place was ok and runaway better than so far in Beijing, but actual flying of anything but 3D models would be over at least some kind of buildings. Good place in overall, but bit far away (65km one way). Well, didn't feel that long on a first visit...
Attached Thumbnails
  • Name: BeiAnHe1.jpg
Views: 107
Size: 65.1 KB
Description: Runaway one end Runaway one end 65.1 KB · Views: 107

  • Name: BeiAnHe2.jpg
Views: 90
Size: 63.3 KB
Description: Runaway other end Runaway other end 63.3 KB · Views: 90

  • Name: BeiAnHe3.jpg
Views: 120
Size: 78.4 KB
Description: Some locals were dropping waterbombs Some locals were dropping waterbombs 78.4 KB · Views: 120

  • Name: BeiAnHe4.jpg
Views: 109
Size: 83.7 KB
Description: Seriously interestead of my Groovy Seriously interestead of my Groovy 83.7 KB · Views: 109

  • Name: BeiAnHe5.jpg
Views: 118
Size: 94.4 KB
Description: Finnish tradition after flying, barbecue sausages and if you are not flying or driving, beer... Finnish tradition after flying, barbecue sausages and if you are not flying or driving, beer... 94.4 KB · Views: 118

illi is offline Find More Posts by illi   Reply With Quote
Old Oct 03, 2006, 10:49 AM   #55
Houng-wen Lin
Gold Member
 
GWS4CEO's Avatar
 
Join Date: Sep 2001
Location: Shijr, Taiwan. DungGwan, China. City of Industry, California.
Posts: 18,200
Send a message via MSN to GWS4CEO Send a message via Yahoo to GWS4CEO
This is a shop in Beijing.
Attached Thumbnails
  • Name: DSC02216_大小 .JPG
Views: 136
Size: 55.5 KB
Description: 55.5 KB · Views: 136

  • Name: DSC02217_大小 .JPG
Views: 92
Size: 73.9 KB
Description: 73.9 KB · Views: 92

  • Name: DSC02218_大小 .JPG
Views: 98
Size: 50.0 KB
Description: 50.0 KB · Views: 98

  • Name: DSC02219_大小 .JPG
Views: 105
Size: 50.0 KB
Description: 50.0 KB · Views: 105

  • Name: DSC02222_大小 .JPG
Views: 111
Size: 64.0 KB
Description: 64.0 KB · Views: 111

  • Name: DSC02224_大小 .JPG
Views: 124
Size: 60.1 KB
Description: 60.1 KB · Views: 124

  • Name: DSC02225_大小 .JPG
Views: 99
Size: 69.3 KB
Description: 69.3 KB · Views: 99

GWS4CEO is offline Find More Posts by GWS4CEO   Reply With Quote
Old Oct 03, 2006, 06:49 PM   #56
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Quote:
Originally Posted by illi
Last sunday we went to Bei An He, northwest of Beijing to a small airfield (?). Place was ok and runaway better than so far in Beijing, but actual flying of anything but 3D models would be over at least some kind of buildings. Good place in overall, but bit far away (65km one way). Well, didn't feel that long on a first visit...
Ilkka,

Do you have the coordinates for Bei An He? Been trying to find that place with no luck at all. So much for my geography

When do we go flying again?

Cheers,
Albert
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Old Oct 06, 2006, 10:50 AM   #57
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Quote:
Originally Posted by Beijing_eFlyer
Ilkka,

Do you have the coordinates for Bei An He? Been trying to find that place with no luck at all. So much for my geography

When do we go flying again?

Cheers,
Albert
Hi, here's the Google Earth -coordinates for Bei An He.

Ilkka
Attached Files
  • Download Bei An He.kmz Bei An He.kmz (436 Bytes, 71 views) Google Earth Placemark for Bei An He flying place

illi is offline Find More Posts by illi   Reply With Quote
Old Oct 06, 2006, 10:59 AM   #58
Registered User
 
illi's Avatar
 
Join Date: Oct 2004
Location: Oulu, Finland
Posts: 30
Miyun flying place

Hi again,

Today we went flying again after Beijing Model Expo finished and our car was full of merchandise from the expo

This time we aimed to Miyun, north east of Beijing, about 90km from where we live. It's little bit far away for what we have used to, but what one would not do for a chance to fly in good location

Plenty of room at Miyun ex-airfield and defineteley no side barriers or buildings causing you cold sweat when you go below 100meters

Here you have few images as well as placemark for location. Good news is that ther is new Jingcheng -expressway from Beijing goes to about 2km from the airfield, so don't bother to take Jingshun Road at all if you value flying time instead of spending time in traffic jam... Let me know if you need further driving instructions...

<Edit> One thing to add, today on a last flight Juhani flied Venus for the first time from take off to landing without the need of me to release my finger from trainer-switch. Congratulations!!!</edit>
Attached Thumbnails
  • Name: Miyun1.jpg
Views: 106
Size: 53.3 KB
Description: West end of runaway... West end of runaway... 53.3 KB · Views: 106

  • Name: Miyun2.jpg
Views: 113
Size: 52.1 KB
Description: East end of the runaway East end of the runaway 52.1 KB · Views: 113

Attached Files
  • Download Miyun.kmz Miyun.kmz (423 Bytes, 62 views) Google Earth placemark for location


Last edited by illi; Oct 06, 2006 at 11:14 AM.
illi is offline Find More Posts by illi   Reply With Quote
Old Oct 07, 2006, 02:56 AM   #59
Houng-wen Lin
Gold Member
 
GWS4CEO's Avatar
 
Join Date: Sep 2001
Location: Shijr, Taiwan. DungGwan, China. City of Industry, California.
Posts: 18,200
Send a message via MSN to GWS4CEO Send a message via Yahoo to GWS4CEO
See: 2006 Beijing Model show 北京模型展
http://www.rcgroups.com/forums/showthread.php?t=578053
GWS4CEO is offline Find More Posts by GWS4CEO   Reply With Quote
Old Nov 07, 2006, 11:09 PM   #60
Registered User
 
Beijing_eFlyer's Avatar
 
Join Date: Apr 2005
Posts: 77
Hi Guys,

Winter is now here in Beijing. Any plans of flying your planes?

Actually, I just want to revive the thread. It disappeared from the list.

Cheers,
Albert
Beijing_eFlyer is offline Find More Posts by Beijing_eFlyer   Reply With Quote
Reply Post New Thread  Previous Thread Next Thread

Castle Creations      DRIVE / FLY / SUPPORT  

Thread Tools



All RCGroups content copyright 1996 - 2009 by RCGroups.com and Jim Bourke except where otherwise indicated.
Terry the transmitter, the RCGroups name and logo, The E Zone, Lift Zone, and RC Power are all trademarks of RCGroups and Jim Bourke. Please report any misuse of our trademarks using the contact form. Thank you.

Bored? Want to fight?
Join the RCGroups clan!

Powered by vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.