Sweet, man!! BTW, I didn't like the counterweights on the ailerons and I end up removing them. I think I gotta post the last Yak plan I've used. It also has only one CF spar on the wing.

http://www.rcgroups.com/forums/attac...mentid=1502473

SD wanted the counterbalances so I added them. AJ told me to try it at RCX years ago; he says make 'em 3" so I did it for the trial factor. IMO it rolls fine without 'em.

And good eye! I put 2 cf spars on SD's because he needs 'em, ok it's really because I had no more 1mm rod.

Thanks for posting the cool design my man!

hi,

here is my flying of Yak 54

Flying Indoor Yak 3d (4 min 20 sec)

Originally Posted by Malves

Sweet, man!! BTW, I didn't like the counterweights on the ailerons and I end up removing them. I think I gotta post the last Yak plan I've used. It also has only one CF spar on the wing.

http://www.rcgroups.com/forums/attac...mentid=1502473

Hey Malves i want to build your V5 yak but how do I size the PDF to print out in real size?

Thanks Sam Bradley

BTW if i can build it i will make a vid of it lol

Playing some more with the $15 harbor freight airbrush:

Hello,

This is my Yak-54 full fuse, thanks for the plans.
RTF is 344 gramms, thrust over 1kg. Lots of fun

Csaba

Hello

and my Yak-54
140 gramms, 250mah, Hyperion Z-1705-11

Originally Posted by GCS

RTF is 344 gramms, thrust over 1kg. Lots of fun Csaba

Thats 1:3 ratio, that is beyond fun
What motor/prop/batt did you use?

Just starting to build one of these ,but need to know what the two long thin strips are for on the plan.
It has one on the top and one on the bottom of the plans.
cheers

Originally Posted by mintie

Just starting to build one of these ,but need to know what the two long thin strips are for on the plan.
It has one on the top and one on the bottom of the plans.
cheers

These are to support the vertical/horizontal fuselage so preventing fuselage twist. (fitted diagonally)
Andy

Hi Malves, do you have an A4 PDF file of the 32" yak??

How much weight are you saving by making the wing connected to the fuselage horizontal? Wouldn't it be simpler just to remove the landing gear?

Wow! Hard to believe this thread's still going on and with over 100k views!

Well..yeah, you still stuck on them flyin bugs or back at things that actually have wings again?

Just maidend !

Build six long month ago ... and finaly there was time and weather


Pichler Nano Limited 1200kv
Slowfly 8x4,3
800mAh 2S / 350mAh 2S
160g with 800er Lipo


It's my first Shocky and after to few 1150mAh of fun ( forgot my charger ) it became my No1. Plane